How much does the Mazda3 weigh?

1 Answers
VonRowan
07/29/25 11:05pm
The 1.5L version of the 2020 Mazda3 weighs 1.29 tons, while the 2.0L version weighs 1.3 tons. The Mazda3 is a vehicle series under Changan Mazda. Mazda3 has made significant improvements to core technologies such as chassis, body, and powertrain, greatly enhancing the product's performance and luxury level, resulting in a substantial upgrade in product grade. Below is a brief introduction about Mazda: 1. Origin: Mazda was founded in 1920 and officially began producing small trucks in Hiroshima in 1931, starting car production in the early 1960s. From 1981 to 2002, Mazda had cumulatively produced over 35 million vehicles of various types. Before the 1990s, Mazda Motor Corporation ranked third in Japan, following Toyota and Nissan, and was one of the world-renowned Japanese automotive brands. 2. Development: Starting in 2000, Mazda entered a new phase of development through the implementation of the "New Millennium Plan." From 2002 onwards, Mazda successively launched a series of new models including the Mazda6 (MAZDA6), Mazda3 (MAZDA3), Mazda2 (MAZDA2), Mazda8 (MAZDA8), RX-8, Roadstar, and CX-7, achieving impressive sales performance worldwide.
Was this review help?
18
3
Share
More Forum Discussions

What's New in the 2021 Toyota IZOA?

Toyota IZOA 2021 new model has added a hybrid dual-engine version. Hybrid vehicles are essentially pure electric vehicles equipped with an additional internal combustion engine, aimed at reducing pollution and increasing the driving range of pure electric vehicles. Exterior: The 2021 IZOA is an annual facelift model rather than a full redesign. It introduces the IZOA Sport Edition, featuring exclusive sport kits, 17-inch blackened aluminum alloy wheels, exclusive silver-black Brancino leather seats, and a unique silver-black roof color scheme, creating a strong visual sense of sportiness. Powertrain: Equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 126 kW and a maximum torque of 203 Nm. Transmission System: Paired with a CVT transmission. This 2.0L + CVT powertrain combination is used across multiple Toyota models, such as the Toyota Avalon and Toyota Camry. In terms of chassis tuning, models built on the TNGA platform are tuned to resemble German cars, offering a strong sense of premium quality and stability during driving.
12
5
Share

Does a faulty sensor in the Roewe RX5 affect driving?

It is not recommended to drive normally if the sensor in the Roewe RX5 is faulty, and it should be repaired as soon as possible. Below is relevant information about the sensor: Hazards of a faulty car sensor: The wheel speed sensor is usually installed on the hub of each wheel. Once it fails, the ABS will become ineffective. The air flow meter is generally installed between the air filter and the throttle body. If it fails, the engine speed will not increase. The water temperature sensor is usually located near the thermostat. If it fails, the engine will have difficulty starting during cold starts, idle unstably, and lack power during acceleration. Repair methods for a faulty car sensor: Disconnect the throttle position sensor's connector and use a multimeter in resistance mode to measure the resistance between the sensor's signal output terminal and the ground terminal. While connected, slowly change the throttle opening. The measured resistance should continuously increase with the throttle opening without any abrupt changes. Use the multimeter to measure the resistance between the sensor's idle contact (IDL) signal terminal and the ground terminal. When the throttle is closed, the resistance should be 0 ohms. As the throttle opens slightly to fully open, the resistance should be infinite.
17
1
Share

What are the effects of changing from 17-inch to 19-inch wheels?

Replacing 17-inch wheels with 19-inch wheels on a car has several impacts: it alters the odometer reading; increases the load on the steering system, potentially causing premature wear; raises the vehicle height, increasing ground clearance, which can disrupt the original aerodynamics at high speeds and lead to reduced stability; increases the load on the braking system, causing brake pads and discs to wear out faster; and directly affects fuel consumption, typically increasing it by approximately 0.5 liters per 10 liters of fuel. After upgrading to larger wheels, the tire aspect ratio decreases, improving visual appeal and enhancing driving stability and lateral support. However, the downsides include increased fuel consumption, and the need to revert to the original setup for annual inspections or ownership transfers. It is advisable to keep the original wheels and tires rather than discarding them. When modifying tires, it is essential to maintain the original wheel diameter and width. The diameter must remain unchanged to avoid affecting the vehicle's fuel consumption and mileage calculations. The width can be slightly increased if necessary, but one must ensure that the steering does not interfere with the fenders when turned to full lock. Increasing width generally leads to higher fuel consumption. For those considering a change, the focus should be on reducing wheel weight, slightly increasing width, and switching to performance tires, as this is the most effective way to enhance performance.
20
4
Share

How to Identify Cylinders 1-6 in an Audi 2.4 V6?

Audi 2.4 V6 engine cylinder identification method: The cylinder closest to the belt is cylinder 1, and moving towards the output end are cylinders 1, 3, and 5 in sequence, while the opposite row consists of cylinders 2, 4, and 6. Generally, with the left bank closest to the belt and considering the car's forward driving direction as the front, the three cylinders on the right side are cylinders 1, 2, and 3, while the three cylinders on the left side are cylinders 4, 5, and 6. The firewall side corresponds to cylinders 1, 3, and 5, and the radiator side corresponds to cylinders 2, 4, and 6. V6 refers to the number of cylinders and their arrangement in the engine. V6 indicates a 6-cylinder engine with a V-shaped configuration, where each cylinder works in harmony, resulting in minimal noise and smooth operation. V-shaped engines have compact length and height dimensions, making them very convenient to arrange. They are generally considered high-end engines and serve as one of the hallmarks of premium sedans, typically installed in mid-to-high-end vehicles.
20
4
Share

What does the car PVC valve mean

Automotive PVC valve is a component in the crankcase forced ventilation system of a car engine, consisting of a valve body, valve, valve cover, and spring. Below is an extended introduction: 1. Working principle: It directs gases from the crankcase into the intake manifold via the PCV valve, with a small amount of air entering the intake manifold directly from the air filter through the PCV valve; 2. Specific uses: This helps prevent phenomena such as icing at the throttle, incomplete combustion, and emission deterioration, while also preventing blow-by gases from entering the atmosphere and avoiding engine oil deterioration.
10
3
Share

What are the differences between 10w40 and 5w40 engine oil?

Engine oil 10w40 and 5w40 have the following differences: 1. Different fluidity: The number before W represents the minimum temperature it can withstand. The smaller the number before W, the lower the low-temperature viscosity, the better the low-temperature fluidity, and the lower the applicable minimum temperature. 2. Different environmental temperatures: Compared with 10w40, 5w40 engine oil can adapt to lower minimum temperatures. Engine oil with a lower number before W can start the engine more easily in cold weather. To determine which one is better, it mainly depends on the driving environment of the vehicle. If the environmental temperature is lower, 5w40 is recommended.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.