How much does the BYD F3 cost per kilometer in terms of fuel consumption?

2 Answers
DelEverly
07/25/25 3:38am
BYD F3 is relatively fuel-efficient. When using 92 or 93 octane gasoline, the comprehensive fuel consumption is basically around 0.4 yuan per kilometer. Actual fuel consumption is affected by many factors and needs to be considered comprehensively from various aspects. The following is the method to calculate fuel consumption: Calculate fuel consumption through the relationship between distance and speed. 1. Fill up the car with gasoline until the pump stops automatically, and record the current mileage. 2. The next time you refuel, fill up until the pump stops automatically again, and record the amount of gasoline added. 3. Calculate the distance traveled since the last refueling, and then calculate the fuel consumption through the relationship between distance and speed.
Was this review help?
1
3
Share
VonEvan
08/10/25 5:05pm
I've been driving my BYD F3 for nearly three years now, and its fuel consumption is quite reasonable. Based on my daily commute conditions, the fuel consumption is about 7.5 liters per 100 kilometers in city traffic jams, and can drop to around 6 liters on the highway. Currently, the price of 92-octane gasoline is about 7.5 yuan per liter, which works out to about 0.56 yuan per kilometer in the city, and slightly cheaper at 0.45 yuan on the highway. There's a noticeable difference in actual driving; with the air conditioning on in summer, fuel consumption can rise to over 8 liters per 100 kilometers, costing about 0.6 yuan per kilometer. If I drive 1,000 kilometers a month, my fuel expenses are generally kept between 500 and 600 yuan. To save on fuel, avoiding sudden braking and coasting to a stop at traffic lights can save a few hundred yuan a year.
Was this review help?
9
4
Share
Expand All
More Forum Discussions

What are the body dimensions of the Xingrui?

Xingrui's body dimensions are 4785mm in length, 1869mm in width, and 1469mm in height, as per official data. The length of the Xingrui refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetrical plane, touching the outermost protruding points at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetrical plane, touching the outermost rigid fixed protruding points on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and its supporting plane. The Xingrui is powered by a 2.0TL4 engine with a maximum output of 190 horsepower and a peak torque of 300 N·m. The official combined fuel consumption is 6.7L per 100 kilometers. There are national regulations regarding vehicle dimensions. According to the national standard 'GB1589-89', the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to ensure sufficient lateral clearance for overtaking between adjacent lanes. This means that, according to national standards, the significance of vehicle width data lies in providing enough space during overtaking to prevent accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5 meters to meet the requirements of public road usage.
5
5
Share

What is the 0-100 km/h acceleration time of the Cadillac ATS-L?

According to official data, the Cadillac ATS-L 2.0T accelerates from 0 to 100 km/h in 6.54 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, represents how much force is available. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. The Cadillac ATS-L accelerates from 0 to 100 km/h in 6.54 seconds with a maximum torque of 400 Nm, while the Mercedes-AMG A35 achieves it in 4.9 seconds with the same maximum torque of 400 Nm. Transmission efficiency: The transmission, as the medium for power delivery, inevitably involves power loss. Higher transmission efficiency leads to better acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Cadillac ATS is equipped with an 8-speed automatic manual transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit: Hp/T). A higher power-to-weight ratio results in faster acceleration. The Cadillac ATS-L accelerates from 0 to 100 km/h in 6.54 seconds with a power-to-weight ratio of 174 Hp/T, while the Mercedes-AMG A35 achieves it in 4.9 seconds with a power-to-weight ratio of 170 Hp/T.
4
2
Share

Can a vehicle have multiple ETCs?

An individual can apply for multiple ETCs. According to the "Implementation Plan for Accelerating the Application of Electronic Non-stop Toll Collection Services on Highways" issued by the Ministry of Transport, the principle is one ETC per vehicle. Therefore, ETC is associated with the vehicle's license. If an individual owns multiple vehicles, they can use different vehicle licenses to apply for ETC. Documents required for ETC application: The original valid ID card of the vehicle owner, the original and a copy of the vehicle license, with the page showing the most recent annual inspection stamp; if applying on behalf of someone else, the original valid ID card of the proxy is also required. If applying through major bank branches, a debit or credit card from the respective bank is needed. Some banks only support ETC binding with credit cards, while others may require freezing a portion of the amount as a deposit when binding ETC with a debit card. ETC deduction principle: There will be one or more ETC lanes on highways. Through dedicated short-range microwave communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, computer networking technology is used to settle accounts with the bank in the background, achieving the goal of vehicles paying tolls without stopping at road and bridge toll stations. All of this is based on the principle of passing first and deducting fees later. Benefits of installing ETC: Time-saving: eliminates the hassle of waiting in line; Green and environmentally friendly: green and low-carbon, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions, and minimizing pollution; Reduced wear and tear: saves costs, decreases the frequency of vehicle starts and brakes, and lowers wear and fuel consumption; Improved efficiency: the theoretical efficiency of ETC lanes can be increased by 2-3 times or more, making traditional ETC updates faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation smart cards in key urban agglomerations will be basically achieved, and the proportion of vehicles equipped with ETC will be significantly increased." It also explicitly set the goal of "achieving a 50% ETC usage rate for road passenger vehicles by 2020" in the main indicators of comprehensive transportation development during the 13th Five-Year Plan. More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the ETC usage rate for passenger vehicles, the future will also promote the use of ETC for trucks and explore the deep integration of the ETC system with the development directions of smart transportation such as vehicle-to-vehicle communication and vehicle-road coordination, providing comprehensive travel services for vehicle owners. This means more application scenarios will support ETC applications. ETC usage precautions:
7
5
Share

Is it necessary to use 95 octane gasoline for the CR-V?

According to the official vehicle manual recommendation, the Honda CR-V should use 92 octane gasoline. In addition to checking the suitable gasoline grade in the vehicle manual, the Honda CR-V's recommended fuel type can also be found on the fuel tank cap, which will be clearly marked. Generally, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of new technologies, the compression ratio alone cannot determine the appropriate gasoline grade, as high compression ratios can also be adjusted to use lower octane gasoline. This is because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally speaking, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the Honda CR-V occasionally uses the wrong gasoline grade, simply switching back to the correct grade after consumption is sufficient. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, using higher octane gasoline will not cause damage, but the increase in octane number may alter the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in poorer performance. For vehicles recommended to use higher octane gasoline, using lower octane gasoline can cause engine knocking. Due to the significantly lower octane number, the fuel's ignition point decreases, causing premature ignition during the compression stroke. If the fuel ignites before the spark plug fires, resistance will occur during the upward stroke. This resistance makes the engine run very unstably. If the knocking is imperceptible, it may only increase noise without obvious damage to the engine. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on the pistons and cylinders, and in severe cases, cylinder scoring.
5
5
Share

Is it allowed to reverse when making a U-turn?

At traffic lights, if a U-turn is not successfully completed, you are allowed to reverse and adjust your position, as long as it does not interfere with the movement of other vehicles, and it is not considered a traffic violation. Circumstances under which U-turns are permitted: Presence of U-turn signals or signs: When there is a U-turn signal at an intersection, a U-turn is allowed when the U-turn signal is green. If there is a U-turn sign or a U-turn indication on the lane, a U-turn can be made while ensuring the safety of yourself and others. No U-turn sign but left turns are allowed (no prohibition of U-turn signs): Vehicles can make a U-turn at intersections where left turns are permitted and there are no signs or markings prohibiting U-turns. It is important to note that vehicles must proceed according to the left-turn signal without interfering with the normal movement of other vehicles. If making a U-turn at an intersection with a left-turn waiting area, you can first enter the waiting area when the straight signal is green and wait until the left-turn signal turns green to make the U-turn. U-turns are allowed at dashed lines: Whether it is a white or yellow dashed line, U-turns are permitted. For double yellow lines with one solid and one dashed, check if your side is the dashed line; if so, a U-turn is allowed safely. If it is a solid line, U-turns are not permitted. If encountering double yellow lines at an intersection, you can make a U-turn from the dashed side, but you must not cross the stop line ahead. U-turns are allowed at yellow grid lines: Parking is prohibited in yellow grid areas, but as long as there is no central barrier, you can make a U-turn here after yielding to normally moving vehicles. U-turns are allowed on the side with dashed lines near green belts: When the area in front of the green belt is a dashed line, vehicles on that side can make a U-turn from there. If the area in front of the green belt is a solid line, vehicles must follow the traffic signal, cross the pedestrian crossing before making a U-turn, and must not cross the solid line or the pedestrian crossing. Precautions for making U-turns: When making a U-turn, you should activate the left turn signal in advance, and the maximum speed should not exceed 30 kilometers per hour. Do not obstruct other vehicles or pedestrians moving normally.
4
4
Share

Why can't the overhead light of the Volkswagen Lavida be turned off?

Lavida's overhead light staying on is due to the reading light switch being activated. Here is some information about the reading light: 1. Introduction: The reading light provides sufficient brightness for passengers when the interior lighting is insufficient, facilitating reading inside the car without affecting the driver's normal operation. Connected to the cigarette lighter socket, it can emit lights of different colors when the switch is pressed. 2. Types: Current car reading lights include ordinary reading lights (single bulb) and LED reading lights (multiple LED lights). They have a long lifespan, generally lasting tens of thousands or even hundreds of thousands of hours.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.