How Much Does a Harley Motorcycle Weigh?

2 Answers
DeEzra
09/07/25 6:57am
Harley motorcycles weigh between 150 kg and 250 kg. Appearance of Harley motorcycles: The essence of Harley's Softail models is to mount the engine on rigid mounts, providing the smoothest ride while maintaining a tough rear-end appearance. Power of Harley motorcycles: Powered by the TwinCam88B engine. The simplified hardtail look, staggered dual exhaust pipes, and 1340cc Evolution® engine combine traditional and innovative aesthetics. The introduction of Softail models allowed Harley-Davidson to maintain its leading position throughout the 1980s.
Was this review help?
15
0
Share
MacHolden
09/19/25 6:05am
As a veteran rider who has owned multiple Harleys, I must say Harley-Davidson motorcycle weights vary significantly by model. The classic Sportster series typically weighs around 550 lbs (approximately 250 kg), feeling more agile for urban riding. However, larger models like the Heritage Softail or Road King can tip the scales at over 700 lbs (about 320 kg) - offering rock-solid stability at highway speeds while requiring more skill in corners. As someone who frequently takes long-distance trips, I appreciate how heavyweight bikes don't get buffeted by crosswinds, though parking and maneuvering demand extra caution, especially for beginners. The weight also impacts fuel efficiency - heavier models consume more gas, but the iconic Harley engine roar compensates for this. Maintenance-wise, always check tire pressure due to the weight burden, and watch for accelerated chain wear. Ultimately, weight defines the Harley experience - each model, from lightweight to heavyweight, has its unique charm. My advice? Choose a bike that matches your physical capability.
Was this review help?
9
1
Share
Expand All
More Forum Discussions

How to Remove the Driveshaft on a BMW X5?

Below are the steps for removing and installing the driveshaft on a BMW X5: 1. Specialized tools are required. 2. Use a specialized tool to secure one bolt. 3. Loosen the other nut. 4. It is recommended to have the driveshaft removal and installation performed by professionals at a 4S shop. Introduction to the BMW X5's powertrain: 1. The 2020 BMW X5 is equipped with two engines: a 2.0T inline four-cylinder and a 3.0T inline six-cylinder. 2. The maximum power outputs are 265 horsepower and 360 horsepower, respectively. 3. The peak torques are 400 Nm and 450 Nm, respectively. 4. The drivetrain comes standard with an 8-speed automatic transmission and the xDrive all-wheel-drive system.
11
3
Share

What colors are available for the Equinox?

The Equinox offers six body colors: Arctic White, Star Silver, Volcanic Red, Canyon Gray, Midnight Black, and Cold Rock Gray. Here is some related information about the Equinox: 1. The Equinox is a midsize SUV under the Chevrolet brand, equipped with two engine options: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. 2. The 1.5-liter turbocharged engine delivers 169 horsepower and a maximum torque of 250 Nm, with a maximum power output at 5,600 rpm and peak torque between 1,700 to 4,000 rpm. It is paired with a 6-speed automatic transmission. 3. The 2.0-liter turbocharged engine produces 260 horsepower and a maximum torque of 353 Nm, achieving maximum power at 5,500 rpm and peak torque between 2,000 to 5,300 rpm. It is matched with an 8-speed automatic transmission.
20
1
Share

What Kind of Oil is Best for Turbocharged Engines?

Turbocharged engines are best suited for full synthetic oil. Here is an introduction to full synthetic oil: Full synthetic oil is a man-made lubricant that undergoes chemical decomposition of various natural substances during production, followed by synthesis with other materials to produce the final synthetic oil. It offers more stable chemical properties, better fluidity, and lower resistance, providing optimal engine protection while reducing fuel consumption. When selecting oil, pay attention to two key indicators: SAE and API. SAE indicates the oil's viscosity grade, while API represents the oil's quality level. In the API quality classification (e.g., "SN" or "CG"): "S" denotes oil for gasoline engines, and "C" denotes oil for diesel engines. If both "S" and "C" are present, the oil is suitable for both gasoline and diesel engines. The letters following "S" or "C" (e.g., from "SA" to "SN") indicate progressively better performance with each increment. Currently, the highest API quality grade is SN.
13
0
Share

What Causes Abnormal Noises from Car Window Glass While Driving?

Abnormal noises from car window glass while driving may be caused by the following reasons: 1. Aging of the glass sealing strip leading to noise from the window glass. Solution: If it's a newly purchased car with vibrating glass sounds, there's no need to replace the sealing strip. Simply apply electric lubricating oil evenly on the strip and repeatedly raise and lower the glass a few times. If the sealing strip is severely aged, it's best to replace it directly. 2. Dust and particles can easily enter the gaps of the window glass sealing strip in the glass track during window operation, which can cause abnormal vibrations and noises. Solution: Use professional tools to promptly clean out debris from the glass track. 3. Loose fastening screws or misaligned parts inside the car dashboard can cause the window glass to vibrate and produce abnormal noises. Solution: This issue may be related to improper screw tightening and installation positioning during the manufacturer's assembly. To completely eliminate the fault, the dashboard needs to be removed for inspection and repair.
17
1
Share

What are the causes of engine stalling at idle?

Engine stalling at idle can be caused by the following reasons and solutions: Causes of engine stalling at idle: Severe carbon buildup in the engine; Dirty throttle body or carbon deposits in the fuel injectors; Faulty spark plugs, high-voltage wires, or ignition coils leading to poor ignition system performance; Unstable oil pressure, insufficient fuel supply pressure from the fuel pump, or incorrect readings from the intake pressure sensor; Clogged fuel lines causing insufficient fuel supply; Aging engine components. Solutions for engine stalling at idle: Regularly clean the throttle body; Periodically clean the fuel injectors to prevent carbon buildup; Replace spark plugs; Use gasoline from reputable gas stations. Engine stalling at idle refers to the situation where the engine starts and runs well from low to high speeds, but stalls immediately when the accelerator pedal is released or becomes unstable and then stalls.
15
2
Share

How to Turn Off the Start-Stop Function in Audi?

There are two methods to disable the Audi automatic start-stop function: 1. When starting the vehicle, enter the car and start it. The Audi automatic start-stop function is enabled by default. Locate the automatic start-stop switch near the center console and turn it off. After turning it off, the dashboard will indicate that the automatic start-stop function is unavailable. However, if you restart the ignition switch, you will need to repeat this step to ensure the system remains off. 2. Use a specialized diagnostic tool. Insert the diagnostic tool into the vehicle's OBD port and establish communication with the vehicle. Navigate to address code 09 for the central electrical equipment control unit. Find the access function and enter "20113" to confirm. Input channel number "34", read and record the original value, add "30" to the original value, and click save. After performing this operation, restart the vehicle, and the system will default to the off state. If you need to use the automatic start-stop function, press the switch to turn it on.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.