How much does a 1.4L displacement car cost per kilometer in fuel?

What is the mandatory scrapping period for sedans?

There is no mandatory scrapping period for sedans, but rather a guided scrapping policy. For 5-seat family sedans and 7-seat SUVs that are non-commercial small or mini vehicles, there is no usage lifespan limit. When the normal driving mileage reaches 600,000 kilometers, the government will recommend scrapping. Guided scrapping is a recommendation, but if the vehicle still meets the requirements for continued use, it does not have to be scrapped. There are four criteria for mandatory scrapping: 1. Reaching the stipulated usage period; 2. After repairs and adjustments, the vehicle still fails to meet the national safety technical standards for in-use vehicles; 3. After repairs, adjustments, or the adoption of control technologies, the vehicle's emissions or noise still fail to meet national standards for in-use vehicles; 4. Failing to obtain the motor vehicle inspection qualification mark for three consecutive inspection cycles after the inspection validity period expires.

20

2

Share

What to Do When Mercedes-Benz Remote Key Fails?

Mercedes-Benz remote key failure is caused by damage to the transmitter in the remote key, resulting in incorrect transmission of commands. Taking the Mercedes-Benz GLC as an example, here are the specific details of the GLC: 1. Configuration: The entry-level 260 model offers more features, including a rearview camera, power tailgate, remote start, full LCD instrument panel, and a larger multimedia system. The full LCD instrument panel is now available even in the entry-level models. The system is equipped with Mercedes-Benz's latest MBUX-NTG6.0 infotainment system, supporting voice control, gesture control, AR navigation, and other functions. 2. Powertrain: The 2020 Mercedes-Benz GLC is only available in 260 and 300 power variants. The 300 model in the 2020 version sees an increase in maximum power from 180kW to 190kW and maximum horsepower from 245hp to 258hp.

19

5

Share

Where is the Body Stability System of the Lynk & Co 01 Located?

The Body Stability System of the Lynk & Co 01 is located at the lower left corner of the center console. It is equipped with the latest ESP 9.3 system developed by Bosch, one of the world's largest core automotive technology suppliers. The 9.3 version significantly improves system compatibility and incorporates active safety technology into the execution of the ESP system. Here is some relevant information about the ESP Electronic Stability Program: 1. The ESP Electronic Stability Program is the "sports nerve" of a car. It can control the driving and driven wheels, analyze the vehicle's driving state information, and minimize the danger caused by improper operation when the vehicle is turning. 2. When the vehicle is on a road with low friction, tire slippage can cause the vehicle's movement direction and speed to be uncontrollable by the driver. At this time, ESP can intervene by braking the non-slipping wheels, helping the driver regain control of the vehicle to ensure driving safety.

7

5

Share

What are the penalties and points deduction for exceeding the speed limit by more than 50% on highways?

If you exceed the speed limit by more than 50%, your driver's license will be revoked and you will be fined 2,000 yuan; if you exceed the speed limit by more than 10% but less than 20%, you will be fined 200 yuan and deducted 3 points; if you exceed the speed limit by more than 20% but less than 50%, you will be fined 200 yuan and deducted 6 points; if you exceed the speed limit by less than 10%, you will usually be given a warning. Relevant information about speed limits is as follows: 1. Introduction to speed limits: Speed limits generally refer to the regulation of vehicle speeds within a certain numerical range for a specific length of road. 2. Purpose of speed limits: The main purpose is to pre-warn drivers to reasonably control their speed in subsequent sections of the road ahead, prevent speeding dangers, and ensure driving safety. Speed limits are an indispensable and most important part of road transportation safety.

10

0

Share

How Many Times Can You Take the Driving Test for Subject Two and Three?

Subject Two and Three each have five attempts. If you cannot pass the test within these five attempts, you will need to re-register at a driving school and retake the Subject One test. Relevant information about the driver's license test is as follows: 1. Introduction: The driver's test is a qualification examination organized by the Vehicle Management Office of the Public Security Bureau. Only by passing the driver's test can you obtain a driver's license and legally operate a motor vehicle. 2. Content: The motor vehicle driver's test is divided into the following subjects: Road Traffic Safety Laws, Regulations, and Related Knowledge Test (also known as the "Theoretical Test", abbreviated as "Subject One"), Field Driving Skills Test (commonly known as "Pole Test", abbreviated as "Subject Two"), and Road Driving Skills and Safe and Civilized Driving Knowledge Test (commonly known as "Road Test", abbreviated as "Subject Three"). The test content and passing standards are uniform nationwide, with corresponding test items specified according to different types of vehicles eligible for driving.

9

2

Share

How to reset the tire pressure light on the GAC Honda Vezel?

Press the arrow button at the lower right of the steering wheel until the display shows the personalized settings. Press the sel/reset button, and the display will show entry into the tire pressure monitoring system calibration. Press the arrow button at the lower right of the steering wheel again, and the display will show calibration. After a few seconds, the tire pressure warning light will be reset. Common methods for tire pressure reset: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally, the dashboard warning light will turn off, indicating the tire pressure reset is complete. Tire pressure reset: Tire pressure reset is the operation of resetting the tire pressure monitoring system after addressing a tire pressure fault. Vehicles are usually equipped with a tire pressure monitoring system that alerts for tire leaks and abnormal tire pressure. The tire pressure monitoring indicator light will illuminate to ensure driving safety.

18

2

Share

How much does a 1.4L displacement car cost per kilometer in fuel?

What is the mandatory scrapping period for sedans?

What to Do When Mercedes-Benz Remote Key Fails?

Where is the Body Stability System of the Lynk & Co 01 Located?

What are the penalties and points deduction for exceeding the speed limit by more than 50% on highways?

How Many Times Can You Take the Driving Test for Subject Two and Three?

How to reset the tire pressure light on the GAC Honda Vezel?

How to Reset the Warning Light by Yourself?

What is the Difference Between 95 Octane and 98 Octane Gasoline?

What Maintenance Should Be Done When a Car Reaches 40,000 Kilometers?

How Far Can a Full Tank of Gas Take the Geely Binyue?