How much distance should be left before and after reversing into the garage?

2 Answers
ZaneAnn
07/29/25 9:16pm
When reversing into the garage, the best distance between the garage corner and the car body is 30cm. There is an error in observing the distance between the car body and the garage corner through the rearview mirror when reversing into the garage. Reversing into the garage: Reversing into the garage is a mandatory test item for obtaining a small car driver's license after 2013, mainly assessing the driver's ability to operate the car in a parking lot. Reversing into the garage is an assessment point in the driver's test. That is, manipulating the vehicle to correctly reverse into the garage from both sides during movement. Distance error: Estimating the distance between the rear wheel grounding point and the garage corner through the rearview mirror, but this has an error compared to the actual distance, requiring more practice to grasp the error.
Was this review help?
10
4
Share
SanCayden
08/15/25 7:44pm
When reversing into a parking space, it's generally recommended to leave about half a meter to one meter of space both in front and behind. The purpose of this is to provide yourself with enough buffer space to avoid scraping against walls or other vehicles. Especially after completing the reverse, it ensures you won't awkwardly hit the wall when opening the door to exit, and it also prevents accidents in case a child or pet suddenly appears. During actual reversing, I usually rely on rearview mirrors or backup cameras to assist in judging the distance—for example, when objects appear smaller in the mirror, it's about right. Don't skimp on that little bit of space; parking too close might damage the bumper or make steering less flexible while reversing. The distance can be adjusted slightly based on the environment—for instance, be more cautious in tight underground garages, but don't waste space in open areas. In short, safety comes first—always ensure you have room to handle unexpected situations.
Was this review help?
14
3
Share
Expand All
More Forum Discussions

How to Open the Remote Key of Peugeot 408?

To open the remote key of the Peugeot 408, insert a small screwdriver into the groove of the key and pry open the back cover of the remote. Taking the 2020 Peugeot 408 as an example, its body structure is a 4-door, 5-seater sedan with the following dimensions: length 4750mm, width 1820mm, height 1488mm, wheelbase 2730mm, fuel tank capacity 53L, and trunk capacity 455L. The 2020 Peugeot 408 is equipped with a 1.2L turbocharged engine, delivering a maximum horsepower of 136PS, maximum power of 100kW, and maximum torque of 230Nm, paired with a 6-speed dual-clutch transmission.
8
2
Share

What are the symptoms of a bad car fuel pump?

The symptoms of a bad car fuel pump are: 1. Weak acceleration, with jerking when accelerating suddenly; 2. Difficulty starting, requiring prolonged cranking; 3. Engine warning light illuminated; 4. Unusual noises during driving; 5. Abnormal engine vibration; 6. Failure of the fuel supply system. The causes of fuel pump damage are: 1. Use of low-quality gasoline, leading to excessive impurities clogging the pump's suction filter; 2. Failure to replace the fuel filter that traps foreign particles and impurities regularly; 3. Delayed refueling, causing accelerated damage to the fuel pump. The function of the fuel pump is: to pressurize the oil from the oil pan and deliver it to the oil filter and various lubrication channels, lubricating the engine's main moving components and ensuring the oil is filtered.
7
5
Share

What are the differences between the Mercedes-Benz S-Class and E-Class?

The differences between the Mercedes-Benz S-Class and E-Class: 1. Different engines: The S-Class uses a 3.0-liter turbocharged engine across the entire lineup; the E-Class uses three engines, namely a 1.5-liter turbocharged engine, a low-power version 2.0-liter turbocharged engine, and a high-power version 2.0-liter turbocharged engine. 2. Different control systems: The S-Class is equipped with the newly developed HMI interactive control system; the E-Class is equipped with the Audio20GPS system across the entire lineup. The low-power version 3.0-liter turbocharged engine used in the S-Class delivers 299 horsepower and a maximum torque of 420 Nm. This engine achieves its maximum power at 5,500 to 6,100 rpm and its maximum torque at 1,800 to 5,800 rpm.
15
3
Share

Which gear to use when driving uphill with an automatic transmission?

When driving uphill with an automatic transmission, use the L gear, which is the low gear. The other gears are as follows: 1. P gear is the parking gear and starting gear; 2. R gear is the reverse gear; 3. N gear is the neutral gear; 4. D gear is the drive gear, also known as the forward gear; 5. S gear is the sport mode. An automatic transmission does not require the driver to manually shift gears; the vehicle will automatically select the appropriate gear based on driving speed and traffic conditions. The starting steps are: 1. Sit in the driver's seat and press the start button to turn on the ACC light; 2. Press the start button again for the vehicle to perform a self-check; 3. Press the brake and press the start button to ignite and start the engine; 4. Press the foot brake, shift to D gear, and release the handbrake.
20
2
Share

What is the battery model for Toyota Vios?

Toyota Vios uses the S-95 battery model. Below are methods to extend your car battery's lifespan: Avoid using electrical devices while the engine is off: The battery relies on the vehicle's alternator for charging, which only operates when the engine is running. During daily use, try to avoid using electrical devices like the radio or video player when the engine is not running. Disconnect the battery: If the vehicle will be parked for an extended period, always disconnect the battery. When the vehicle is locked with the remote, the electrical system enters a sleep mode but still consumes a small amount of current. Regular external charging: If the vehicle is frequently used for short trips, the battery may not get fully charged over time, significantly shortening its lifespan. It's necessary to periodically drive at highway speeds or use an external charger to fully recharge the battery.
17
4
Share

Can a Car Pass the Annual Inspection After Replacing the Front Grille?

Replacing the front grille of a car can allow it to pass the annual inspection. The annual inspection is a mandatory test for vehicles that have already obtained official license plates and registration certificates, conducted once a year to assess the vehicle's condition according to the safety technical requirements for motor vehicle operation. The purposes of the annual car inspection are: 1. To promptly eliminate potential safety hazards in the vehicle; 2. To encourage car owners to strengthen the maintenance of their vehicles; 3. To reduce the occurrence of traffic accidents. The contents of the annual car inspection include: 1. Checking whether the engine, chassis, body, and their attachments are clean, complete, and effective, and whether the paint surface is uniform and aesthetically pleasing; 2. Testing the vehicle's braking performance, steering control, lighting, exhaust, and other safety features; 3. Verifying whether the vehicle has undergone modifications, alterations, or transformations, and ensuring that the registration details on the driving license, license plate, and vehicle records match the actual condition of the vehicle.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.