How much discount is generally offered for cars in stock for 10 months?

1 Answers
McDaniela
07/29/25 11:30am
Generally, cars in stock for about 1 year are discounted by 10%-30% compared to new cars, but this is not a standard, and the specific discount still depends on the actual situation. Here is the relevant introduction: Stock time: New cars in stock will definitely be cheaper than brand-new cars, and the longer the stock time, the greater the concession. Due to the long stock time, some parts may be worn out or even aged and need to be replaced. If the discount is not significant, few people would dare to buy. Good condition: Cars in stock are not scary, as long as the car is in good condition and the stock time is not too long, then it can be considered for purchase. Some consumers should pay attention to the stock time when purchasing cars in stock. Generally, the production date of the vehicle can be seen on the car nameplate on the passenger side or in the engine compartment. The time from the production date is the stock time.
Was this review help?
14
0
Share
More Forum Discussions

How to Replace the Cabin Air Filter in an Envision?

Steps to replace the cabin air filter in an Envision: 1. First, open the glove box cover and locate the fixing clip on the right side of the glove box. Pull it outward with force. 2. Remove the fixing clip of the glove box cover to detach it. 3. Use both hands to squeeze the sides of the glove box toward the center, and the glove box can then be taken off. 4. After removing the glove box, you will see the cabin air filter cover. Press the fixing clips on both sides of the cover firmly, and the cover can be removed. 5. Pull the old cabin air filter outward. 6. Install the new cabin air filter and reassemble everything in the reverse order of removal (pay attention to the installation direction of the cabin air filter).
5
5
Share

Where is the VIN located on the Buick GL8?

GL8's VIN is located next to the windshield wiper strip, specifically under the front windshield seal in the engine compartment. More information about the GL8's VIN is as follows: 1. Composition: The Vehicle Identification Number (VIN), also known as the frame number, is a unique set of seventeen alphanumeric characters used on automobiles. It can identify the manufacturer, engine, chassis number, and other specifications of the vehicle. 2. Uniqueness: The arrangement and combination of the VIN ensure that no two vehicles of the same model will have the same number within 30 years, providing a unique identification for each vehicle. 3. Scrap registration: The VIN is like a car's fingerprint. If the steel plate containing the VIN is damaged or the car is scrapped, do not cut the steel plate with the VIN on your own. Be sure to register the vehicle as scrapped.
16
1
Share

How Often Should Crystal Coating Be Applied?

Crystal coating can be applied once a year in northern regions with less rainfall, while in southern regions with more rainfall, it should be done every 8-9 months. Here is a detailed explanation: 1. Crystal Coating: Automotive crystal coating provides a reliable sealing technology for the car paint, offering efficient and long-lasting protection to prevent environmental factors from affecting the paint color. 2. Benefits: Scratch Resistance - Crystal coating protects the vehicle from minor daily scratches, and even when external forces exceed the elastic protection range of the coating, the paint surface usually remains undamaged. Corrosion Resistance - Crystal coating isolates the paint surface from the external environment, effectively preventing oxidation and resisting corrosion from bird droppings, insect residues, acid rain, etc. Easy Cleaning - Crystal coating makes the car paint shine like a mirror, making the vehicle easier to clean and maintain. A simple rinse with water can restore its shine, saving on car wash costs. Enhanced Gloss - Crystal coating increases the brightness of the car surface, giving the paint a crystal-clear and radiant appearance with a gloss level of over 95%.
3
5
Share

What is the GREEN tire?

GREEN is an environmentally friendly tire model by Michelin. Some Michelin tire models feature the GREEN-X mark, indicating they utilize Michelin's GREEN-X technology for eco-friendly tires. Michelin was founded in 1889 in Clermont-Ferrand, France. The company has undergone continuous innovation and development, operating across five continents with R&D centers in Europe, North America, and Asia. Michelin tires are marketed in over 170 countries worldwide. Michelin's GREEN-X marked tires use a special rubber compound with lower rolling resistance. Many tires in Michelin's PRIMACY and ENERGY series carry the GREEN-X eco-label, including brands like BFGoodrich, Uniroyal, Kleber, Riken, Siam, and Taurus. Michelin's "fuel-efficient tires" are designed with advanced materials and tread patterns, allowing the vehicle to coast significantly farther than conventional tires after engine power is cut off. The silica-based GreenX technology reduces fuel consumption. These tires offer benefits like excellent elasticity, low rolling resistance, reduced fuel usage, low heat generation, wear resistance, puncture resistance, high load capacity, and ride comfort. Compared to traditional tires, they demonstrate advantages in environmental protection, energy efficiency, new manufacturing processes, and materials. During driving, energy is consumed by various resistances, with about 20% of gasoline used to overcome tire rolling resistance. Fuel-efficient tread compounds can effectively reduce this resistance. A car equipped with four "fuel-efficient tires" can save approximately 5% in fuel consumption on average. Michelin tires are known for quietness and comfort, with soft treads. The brand offers five main product series: Pilot High-Performance Series: Sporty tires focused on high performance and handling, mainly for sports cars or supercars. Primacy Quiet & Comfort Series: Representing Michelin's comfort and quietness, with models like Primacy LC Bo Yue (positioned for quietness, comfort, and fuel efficiency) and Primacy HP (positioned for quietness, comfort, and handling). The 3ST model emphasizes safety and quiet comfort. Energy Economy & Durability Series: Focused on economy and durability, offering excellent wear resistance, wet performance, and environmental features. Includes XM1 (economy and durability), XM2 (durability and safety), and MXV8. Latitude SUV Series: Designed for SUVs, with strong off-road performance, comfort, wear resistance, and durability, expanding Michelin's presence in the SUV tire market. X-ICE Winter Series: Winter tires for snow and ice conditions, featuring excellent performance on slippery surfaces, durability, quietness, and unique tread water evacuation design. For daily use of Michelin eco-friendly tires, consider the following tips: Regularly inspect tires for cracks or deformations. As tread wears down, grooves become shallower. Worn treads lose traction and water evacuation capabilities, significantly reducing performance. Small cracks may lead to blowouts at high speeds. Also, remove stones lodged in grooves promptly. Park on level ground. Avoid parking on surfaces with sharp or protruding stones. Keep tires away from oil, acids, or other substances that degrade rubber. Avoid turning the steering wheel when parked to prevent accelerated wear. Do not cool overheated tires with water. In hot weather or after high-speed driving, tires may overheat, increasing pressure. Let them cool naturally; never deflate or splash water, as this may cause abnormal tread aging. Avoid sudden braking. Minimize frequent or hard braking to prevent excessive tread wear from skidding.
17
3
Share

What is Automotive Urea All About?

Automotive urea is a liquid used in SCR (Selective Catalytic Reduction) technology to reduce nitrogen oxide pollution in diesel vehicle exhaust. It is applied in diesel engines. Diesel Exhaust Fluid (commonly known as automotive urea, vehicle urea, or automotive environmental urea in China) is a consumable essential for SCR technology. Here is more information about automotive urea: 1. Automotive urea can catalyze the reduction of nitrogen oxides (NOx) in diesel vehicle exhaust into harmless nitrogen (N2) and water in the Selective Catalytic Reduction (SCR) system. 2. If urea is not used, or if the urea quality is inferior or purity insufficient, it can cause the vehicle's engine to automatically reduce speed and pollute the catalyst in the SCR catalytic reaction tank, leading to serious consequences. 3. Generally, the remaining amount of urea is displayed on the dashboard (similar to the fuel gauge). When the urea is depleted, a vehicle indicator light will illuminate as a reminder. The usage of urea is approximately 3% to 5% of the fuel consumption.
8
4
Share

How many hours does it take to charge a 72V 20Ah battery?

For an electric vehicle equipped with a 72V 20Ah battery, the charging time from a fully discharged state is approximately 8 to 10 hours. Below are detailed explanations: 1. Charging Duration For an electric vehicle equipped with a 72V 20Ah battery, the charging time from a fully discharged state is approximately 8 to 10 hours. It is generally recommended to continue floating charging for 2 hours after the indicator light turns green before disconnecting the power. 2. Charging Capacity For lead-acid batteries used in electric vehicles, the typical charging capacity is 1.05 times the discharged capacity. For a 72V 20Ah battery, assuming it is fully discharged (i.e., at rated capacity), the required charging capacity would be 20 * 1.05 = 21Ah. With an average charging voltage of 77.4V, the total power consumption is approximately 1.63 kWh.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.