How much discount does highway ETC offer?

1 Answers
AnastasiaMarie
07/24/25 11:08pm
Highway ETC generally offers a nationwide uniform discount of 5% off. The specific discount may vary depending on the region, and bank promotions are also time-limited. How ETC works: Through the on-board electronic tag installed on the vehicle's windshield, it communicates with the microwave antenna in the ETC lane at the toll station via dedicated short-range communication. It uses computer networking technology to conduct background settlement processing with the bank, thereby achieving the purpose of vehicles passing through highway or bridge toll stations without stopping to pay tolls. ETC usage precautions: The ETC transaction sensing area is 8 meters. When the vehicle in front stops, to prevent the ETC device of the front vehicle from malfunctioning or not having an ETC device at all, keep a distance of more than 10 meters from the front vehicle to avoid automatic sensing and paying for the front vehicle. The recognition speed for ETC lane passage is 20km/h. If the speed is too fast, the vehicle device information cannot be read, which will also lead to payment failure. Unauthorized disassembly or movement of the OBU device, or detachment or loosening of the ETC electronic tag, will cause the electronic tag to fail. It can be sent to the bank where the ETC card was issued or the highway service office for inspection. If the detachment or loosening is not caused by human factors, it only needs to be reactivated. When using a debit card bound to ETC, insufficient balance will also lead to payment failure. Follow the guidance of on-site staff to go to the manual MTC lane and pass using cash or card. If the vehicle's windshield is too thick, it may cause poor sensing. This is especially important for vehicles that have had their windshields replaced after an accident or those with modified front windshields.
Was this review help?
2
5
Share
More Forum Discussions

How many liters of engine oil are needed for MINI maintenance?

Around 4 liters, but do not overfill the engine oil. Excessive engine oil can increase the rotational resistance of the crankshaft, reduce the engine's output power, and may enter the combustion chamber through the piston rings, leading to oil burning, blue smoke emission, damage to the three-way catalytic converter, increased fuel consumption, accelerated wear of cylinders and pistons, and reduced vehicle lifespan. Below are the benefits of regular car maintenance: 1. Fuel savings: Regular car maintenance can achieve an 11.36% fuel saving effect; replacing spark plugs alone can achieve an average 3% fuel saving effect. 2. Reduced emissions: After comprehensive maintenance and adjustments, the CO emissions during idle driving are reduced by an average of 45.37%. 3. Extended lifespan of engine oil and transmission oil: Using high-quality, high-tech maintenance products to clean and protect the engine lubrication system can keep the engine oil clean as new even after 10,000 kilometers of use.
7
5
Share

What is the use of a front winch?

Here is an introduction to the uses of a winch: 1. Towing device: A winch is a mechanical device with a vertically mounted drum that can wind but not store ropes under power drive. It also refers to a winch with a rotation axis perpendicular to the deck, serving as a self-protection and towing device for vehicles and boats. 2. Self-rescue and rescue operations: It can perform self-rescue and rescue operations in harsh environments such as snow, swamps, deserts, beaches, muddy mountain roads, etc. It can also be used for tasks like clearing obstacles, towing items, and installing facilities under other conditions. 3. Safety device: It is an indispensable safety device for military and police, petroleum, hydrology, environmental protection, forestry, transportation, public security, border defense, firefighting, and other outdoor activities. It is mainly used for off-road vehicles, agricultural vehicles, ATVs, yachts, fire rescue vehicles, road wreckers, and other specialized and special-purpose vehicles.
19
1
Share

What Does a Shock Absorber Assembly Include?

A shock absorber assembly consists of a shock absorber, lower spring seat, dust cover, spring, shock absorber pad, upper spring seat, spring seat, bearing, top rubber, and nut. The following introduces the difference between a car shock absorber assembly and a shock absorber: 1. Different hierarchical relationships: (1) Shock absorber assembly: A shock absorber assembly consists of a shock absorber, lower spring seat, dust cover, spring, shock absorber pad, upper spring seat, spring seat, bearing, top rubber, and nut. (2) Shock absorber: A shock absorber is part of the shock absorber assembly. 2. Different replacement difficulties: (1) Shock absorber assembly: Replacing a shock absorber assembly only requires loosening a few screws to complete the task. (2) Shock absorber: Replacing an independent shock absorber is more difficult, requiring professional equipment and technicians, and poses higher risks. 3. Different functions: (1) Shock absorber assembly: A shock absorber assembly also serves as a suspension strut in the suspension system. (2) Shock absorber: An independent shock absorber only has the function of shock absorption.
15
4
Share

What is the difference between Shell engine oil 5w30 and 5w40?

Here is an introduction to the differences between Shell engine oil 5w30 and 5w40: 1. Different high-temperature viscosity: The difference between 5W30 and 5W40 engine oil lies in their high-temperature viscosity. 5W40 has higher viscosity, providing better high-temperature protection and sealing performance. However, higher viscosity is not always better, as excessive viscosity can negatively impact the engine. 2. Different fluidity: Winter oil grades are 0W, 5W, 10W, 15W, 20W, and 25W. The symbol W stands for winter, and the smaller the number before W, the lower the low-temperature viscosity, the better the low-temperature fluidity, and the lower the applicable minimum temperature. 3. Different usage environments: The difference between 5W-40 and 5W-30 is only in the latter number. 40 can be used in environments with temperatures below 40 degrees in summer, while 30 can be used in environments with temperatures below 30 degrees.
10
1
Share

What lights should be turned on in advance when a motor vehicle makes a U-turn?

When a motor vehicle makes a left U-turn, the left turn signal should be turned on; when making a right U-turn, the right turn signal should be turned on. Below is an introduction to vehicle lights: 1. Motor vehicles should use turn signals as follows: (1) When turning left, changing lanes to the left, preparing to overtake, leaving a parking spot, or making a U-turn, the left turn signal should be turned on in advance; (2) When turning right, changing lanes to the right, returning to the original lane after overtaking, or parking by the roadside, the right turn signal should be turned on in advance. 2. At night without street lights: Article 58 states that when a motor vehicle is driving at night without street lights, under poor lighting conditions, or in low visibility situations such as fog, rain, snow, dust, or hail, the headlights, position lights, and rear lights should be turned on. However, high beams should not be used when a following vehicle is driving close to the vehicle in front in the same direction. Motor vehicles driving in foggy conditions should turn on the fog lights and hazard warning flashers.
12
3
Share

How to Test a Motorcycle Rectifier with a Multimeter?

Here is the introduction to testing a motorcycle rectifier with a multimeter: 1. Engine Stalling: After starting the engine, if you remove the positive terminal of the battery and the engine stalls, the rectifier is damaged and must be replaced. 2. Large Voltage Fluctuations: Under normal conditions, whether you accelerate or not, the voltage should remain between 9~13V. If the voltage suddenly surges or drops significantly when accelerating, the rectifier is faulty. 3. Headlight Test: Remove the positive terminal (red wire) of the battery, start the engine, and turn on the headlight. Rev the engine to 4000 RPM and observe if the headlight stays on. If it does, the rectifier is fine; otherwise, it is faulty and should be replaced with a new one. 4. Conductivity Measurement: Use a multimeter to test the rectifier by measuring the conductivity of each pin. However, you need to know the specific functions of the rectifier pins, and the testing methods vary for different rectifiers. The best way to determine the condition of a rectifier is to replace it with a new one of the same model for testing, which is both convenient and accurate.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.