How Many Years of Warranty Does BMW Offer?

How to reset the tire pressure light on Changan Yuexiang?

Changan Yuexiang tire pressure reset method: First, turn on the ignition switch, press and hold the tire pressure monitoring reset button, release after hearing a "dong" sound, the tire pressure monitoring system will store the current normal tire pressure data, automatically clear the original data, and finally the dashboard warning light will turn off, completing the tire pressure reset. The tire pressure monitoring indicator is a yellow symbol, an irregular circle with no seal on top, four small spikes at the bottom, and an exclamation mark inside. The tire pressure monitoring indicator light indicates abnormal tire pressure. Abnormal tire pressure is generally caused by the following three reasons: Abnormal tire pressure: Generally, it will alarm if it is below 1.8bar or above 3.0bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, the tire pressure was not reset in time, causing the tire pressure monitoring system to still record the original data, and the tire pressure monitoring indicator light will turn on. At this time, simply perform a tire pressure reset. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure, directly installed inside the tire and connected to the tire inflation port. If the tire pressure sensor is damaged by impact while driving, it will also cause the tire pressure warning light to turn on. For sensor damage issues, only a brand new replacement part can be used.

10

0

Share

Are Position Lights the Same as High Beams?

Position lights are not the same as high beams. Here is some information about position lights: 1. Position lights: These are warning lights used to alert other vehicles. 2. Location: Position lights are located at the outermost edges of the front and rear of the vehicle. Large trucks also have position lights on the roof and sides. Position lights are installed along the edges of the car's roof, indicating both the height and width of the vehicle. Here is some information about high beams: 1. High beams: The intensity of the light can be adjusted based on the distance of the filament. High beams focus their light parallel, producing a concentrated and bright beam that can illuminate distant and high objects. 2. Usage: High beams should only be used when there is no other surrounding light.

1

5

Share

Can Retreaded Tires Be Used?

Retreaded tires that are produced with national approval can be used for daily purposes. However, retreaded tires produced by unscrupulous vendors for profit-making purposes, through counterfeiting or lacking proper retreading technology and substandard techniques, can easily explode and cause traffic accidents. It is recommended not to use such tires. Below is additional information: 1. Introduction to Retreaded Tires: Retreaded tires, also known as retreaded-tyre in English, refer to tires that can continue to be used after being retreaded. These tires are not as strong or safe as new tires and are generally only installed on the rear axle of a vehicle, used in conjunction with new tires, and are not suitable for the front axle. 2. Development Prospects and Significance of Tire Retreading: Retreaded tires are a positive approach to the recycling of waste tires, representing an extension and reprocessing of the tire industry. They hold significant importance in promoting resource conservation and comprehensive utilization, as well as fostering the transformation of economic growth patterns and sustainable development. In terms of prospects, the retreading of waste tires, like the tire industry itself, is an indispensable sector in the automotive industry and transportation.

12

1

Share

How to Fix a Loose Manual Gear Stick?

To fix a loose manual gear stick, simply replace the gear shift rubber boot. The causes of a loose manual gear stick include: 1. Damaged transmission: The transmission needs to be replaced. 2. Wear and looseness: The plastic washer at the linkage joint between the gear stick and the transmission is worn or the screws are loose. Information about manual transmissions is as follows: 1. Manual transmission: Also known as a manual gearbox, it is a type of transmission and the most basic type in automotive transmissions. 2. Function: Its role is to change the gear ratio, also known as the gear ratio. Based on the principle of leverage, it uses the largest diameter low-speed gear with the longest radius to amplify the engine torque, assisting the vehicle in starting to move forward.

4

0

Share

How to Align the Timing Marks for Chang'an Star Timing Belt?

Introduction to aligning the timing marks for Chang'an Star timing belt: The crankshaft gear mark is a dot, and there are two dots on the camshaft. Align these three dots in a straight line. Ensure the crankshaft is at the top dead center, or refer to the timing cover mark where the arrow points to the dot, aligning them in a straight line. Below is some related information about the Chang'an Star: 1. Safety Features: The Chang'an Star features a protruding front end with a collision buffer frame to reduce driver injury in collisions and ensure driving safety. The front wheels are positioned forward to decrease the impact of frontal collisions, and the front doors are equipped with anti-collision bars for effective resistance against side impacts. 2. Comfort Features: The front seats of the Chang'an Star can slide forward and backward, and the backrest angle is adjustable, accommodating drivers of different sizes and heights. The middle row seats have adjustable backrest angles for enhanced comfort. The rear seats can be folded to increase cargo space, making it easier to transport large luggage. The engine uses full-floating support technology to effectively block noise and vibrations from the muffler.

14

0

Share

Solutions for Oil Burning in 2012 Malibu

Here are the detailed explanations of the causes and solutions for oil burning in the 2012 Malibu: 1. Piston seal abnormality: Excessive clearance between the piston and cylinder wall causes oil to splash into the combustion chamber during piston movement. Solution: Replace with slightly more viscous oil to enhance sealing. 2. Oil blockage: Aging or failure of the valve stem seals allows oil to enter the combustion chamber through the gap between the valve stem and guide hole under the influence of intake manifold vacuum. Solution: Use tools like a syringe to extract excess oil.

2

1

Share

How Many Years of Warranty Does BMW Offer?

How to reset the tire pressure light on Changan Yuexiang?

Are Position Lights the Same as High Beams?

Can Retreaded Tires Be Used?

How to Fix a Loose Manual Gear Stick?

How to Align the Timing Marks for Chang'an Star Timing Belt?

Solutions for Oil Burning in 2012 Malibu

Reasons Why BMW Steering Wheel Does Not Automatically Extend and Retract

What brand of car is edition?

Is a car registered in July 2012 exempt from inspection in 2021?

Why doesn't Haojue Guosi carry the Suzuki logo?