How Many Years of Driving Experience is Required for a Novice to Drive on the Highway with a Companion?

2 Answers
MasonRose
07/25/25 2:23pm
Novices require a companion with over three years of driving experience to drive on the highway. According to the regulations on the application and use of motor vehicle driving licenses, the first 12 months after a motor vehicle driver initially applies for a driving license is the probationary period. During this period, if a driver operates a motor vehicle on the highway, they must be accompanied by a driver who holds a driving license for the corresponding or a higher vehicle category with more than three years of experience. For driving a small automatic transmission passenger vehicle for the disabled, the accompanying driver must hold a driving license for small automatic transmission passenger vehicles or above. When driving on the highway, it is essential to comply with relevant regulations. In case of encountering uncivilized behavior, legal evidence can be collected and reported through effective channels.
Was this review help?
19
2
Share
AidenAnn
08/11/25 9:04pm
When I first got my driver's license, I was super excited and wanted to try driving on the highway for fun, but I heard there are rules against going solo. During the probationary period for new drivers, which lasts the first year, you must have an experienced driver accompany you on the highway—someone who’s held their license for at least three years. Why? Highways have incredibly fast speeds, and a single lapse in attention can lead to accidents. New drivers lack experience and can easily panic. For example, changing lanes without checking mirrors or hesitating while overtaking can cause major trouble. I remember the buddy who accompanied me on my first highway drive taught me to maintain a 100-meter following distance and accelerate or decelerate smoothly. Wait until after the probationary period to drive alone—safety comes first. Don’t impulsively break the rules; driving solo could mean fines and points deducted from your license. It’s much safer to practice a few times with someone familiar with highway conditions.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

What Causes Car Window Film to Bubble?

The bubbling of car window film may be caused by substandard film quality or improper installation techniques by the workers. Here are some precautions for car window film installation: 1. Sun exposure: After installing the film on the windshield, try to park the car facing the sun during the day to help the film dry faster. It usually takes about half a month for the film to completely dry, including the rear window. 2. Avoid rolling down the windows: For three days after installing the car soundproof and heat insulation film, avoid rolling down the windows. Since there is still moisture between the newly installed film and the window glass, rolling down the windows during this period can easily cause the edges of the film to peel off, and in severe cases, the film may not adhere to the glass again. 3. Avoid car washing for three days: Due to the high water pressure of professional car washing equipment, water can easily seep in from the edges of the windows, increasing the moisture content between the glass and the film. Rolling down the windows within three days can still easily cause the edges of the film to peel off.
2
1
Share

What are the symptoms of a clogged car air conditioning evaporator?

The symptom of a clogged car evaporator is that the car air conditioning does not cool. The methods for cleaning the car air conditioning evaporator are as follows: 1. Disassembly and cleaning: This operation is prone to damage the air conditioning system components, and improper installation sealing can easily cause air conditioning system failures. Generally, this cleaning method is not recommended unless there is damage to the air conditioning system components that requires disassembly and replacement. 2. Traditional air conditioning foam cleaner cleaning: Traditional air conditioning foam cleaner cleaning mainly relies on foam reduction and the air speed of the blower to remove dirt. The disadvantage is that it cannot clean targeted areas, and the water droplets after foam reduction can easily burn the air conditioning blower resistors and other resistive components. 3. Visualized evaporator cleaning: This cleaning method is now popular on the market, allowing the entire cleaning process to be clearly seen and targeted cleaning of dirt. The advantages are thorough cleaning, comprehensive sterilization, and system antibacterial. Since specialized instruments are required, it is recommended that car owners go to a professional cleaning shop for this service.
12
3
Share

Does charging in a car consume fuel or electricity?

Car charging consumes negligible fuel. Relevant information about electric vehicle charging is as follows: 1. Electric vehicle charging equipment: For an electric vehicle, the battery charging equipment is one of the indispensable subsystems. Its function is to convert the electrical energy from the grid into the electrical energy of the vehicle's onboard battery. There are different methods to classify electric vehicle charging devices. Generally, they can be divided into onboard charging devices and off-board charging devices. 2. Conventional charging: This charging method is mostly used for home charging facilities (onboard chargers) and small charging stations for electric vehicles. The onboard charging device is the most basic charging equipment for pure electric vehicles. The charger is fixed on the vehicle or placed in the trunk as a standard configuration. Since charging can be done simply by plugging the onboard charger into a power outlet in a parking lot or at home, the charging process is usually completed independently by the customer. 3. Fast charging: This charging method uses a high charging current of 150–400A to charge the battery in a short time, and its installation cost is relatively higher compared to the former. Fast charging can also be called rapid charging or emergency charging, aiming to fully charge an electric vehicle in a short time, and the charging time should be close to the refueling time of a fuel-powered vehicle.
20
1
Share

Why Can't the Air Recirculation Be Turned Off?

The reasons why the car's air recirculation cannot be turned off include damage to the recirculation switch or a malfunction in the car's air conditioning control circuit. Damage to the recirculation switch: It is necessary to check the vehicle's onboard computer or inspect the fuse for the recirculation system and carry out repairs. If the car's recirculation switch is manually adjusted, it might be due to the detachment of the hook behind the control panel. In this case, a mechanic should be consulted to remove the control panel and reattach the hook. Malfunction in the car's air conditioning control circuit: If the control circuit is damaged, the recirculation cannot be controlled via the switch, and it is necessary to visit a repair shop for inspection. How to activate recirculation: The air conditioning defaults to external air circulation. Pressing button "4" activates the air recirculation mode. Enabling the air recirculation mode helps quickly lower the temperature inside the car and prevents outside air and odors from entering the vehicle. The status is indicated by the LED light on the button. Pressing button "4" again deactivates the recirculation mode.
6
3
Share

What are the reasons for the ETC alarm to keep beeping?

ETC alarm keeps beeping for the following reasons: The newly arrived device has not been activated yet. When driving on the highway, occasional beeping is normal, but continuous beeping indicates an abnormal mailed device. The newly arrived device may have low battery due to shipping and storage time. During installation, the solar panel is placed under a dark film, preventing it from charging. During installation, the anti-tamper button was accidentally pressed and released, causing it to fail and trigger the beeping sound. During the first installation of the ETC device, the glass sensor position was not pressed firmly enough. ETC installation process: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly turn on. The OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield to ensure the glass surface is smooth, clean, and dry. Then peel off the OBU adhesive backing and stick it to the installation position. Press firmly for 2-3 minutes to remove air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield, ensuring the chip is inserted into the OBU device.
12
5
Share

Is the turn signal down for left or right turn?

Turning the signal lever downward activates the left turn signal. Drivers can simply imagine the turn signal lever as a steering wheel to determine the direction to turn. The standard convention is right-up and left-down for turn signals, where downward (counterclockwise) is generally understood as left, and upward (clockwise) as right. According to Articles 57(1) and 57(2) of the Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China: When making a left turn, changing to the left lane, preparing to overtake, leaving a parking spot, or making a U-turn, the left turn signal must be activated in advance. When making a right turn, changing to the right lane, returning to the original lane after overtaking, or parking by the roadside, the right turn signal must be activated in advance. The turn signal is a crucial indicator light used when a motor vehicle is turning, alerting surrounding vehicles and pedestrians. The turn signal bulb uses a xenon tube and a microcontroller-regulated circuit to achieve alternating high-frequency flashing. The turn signal employs a flasher unit to create the blinking effect. As a signal light, the primary function of the turn signal during daily driving is to notify nearby vehicles of an intended turn, prompting them to yield and avoid collisions. Whenever a vehicle needs to steer away from its current lane, the turn signal must be activated beforehand—this is a fundamental principle of safe driving.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.