How Many Years Is the Warranty for Car Transmissions?

1 Answers
StevenDella
07/30/25 7:39am
The warranty period for a universal transmission is ten years or 160,000 kilometers. Below are more details: 1. To extend the lifespan of the transmission, it is essential to understand the basics of transmission protection. 2. Every 15,000 kilometers driven, the automatic transmission should be inspected and maintained. Check for leaks, oil level consistency, and oil quality. 3. If oil leakage is detected, it must be repaired promptly. If the oil level is low, the same type of oil must be added to the transmission. Be careful not to overfill, as excessive oil can also damage the transmission.
Was this review help?
10
0
Share
More Forum Discussions

Can the owner be absent during the vehicle inspection?

Can the owner be absent during the vehicle inspection? The following is the relevant introduction to vehicle annual inspection: 1. Inspection time: The owner of the motor vehicle can apply for the inspection qualification mark to the vehicle management office at the place of registration within three months before the expiration of the motor vehicle inspection validity period (vehicles after September 2012 are inspected every six years). The inspection time is within three months before the annual registration date of the driving license expires. 2. Materials: Before the annual inspection, check the validity date of the compulsory traffic insurance that includes the vehicle and vessel tax. If it has expired or will expire within three months after the inspection date, it is recommended to renew it in advance. ID card of the owner or agent; vehicle driving license.
9
1
Share

Which button unlocks the trunk of the Volkswagen Lavida?

The trunk of the Volkswagen Lavida can be directly opened using the remote key by pressing the trunk unlock button on the remote key. Additionally, there is also an opening switch located on the lower left side of the driver's seat, and the trunk can also be controlled to open and close via the car's central control screen. The following is an introduction to the Lavida: 1. Interior: In terms of interior, the Lavida offers a rich color palette. In addition to the traditional black design, there are also moon gray and white options. These colors largely downplay the moon gray while making the black more prominent. The entire dashboard features a very eye-catching decorative panel, enhancing the overall sense of luxury, and the multimedia display is embedded in the dashboard, making the design very integrated. 2. Engine: The Lavida is equipped with a naturally aspirated engine and a 5-speed manual transmission. In terms of fuel consumption, it is not very high, requiring only 5.6L/100km.
14
2
Share

Where is the USB port located in the Mercedes-Benz E300L?

Mercedes-Benz E300L USB port is located in the center console area, and a conversion adapter is required for USB flash drive insertion. Below is relevant information about the Mercedes-Benz E300L: 1. Positioning of E300L: The E300L is a model exclusively designed for the Chinese market, with its extended wheelbase specifically catering to domestic users' needs. Its domestic production offers more competitive pricing compared to the imported version. 2. Wheelbase: The new generation Mercedes-Benz E-Class features a 14cm longer wheelbase. Overseas models with 4868mm body length have 2874mm wheelbase (already 20mm longer than previous generation). After 14cm extension, the wheelbase will reach 3014mm.
15
2
Share

Should the Volkswagen Tacqua use 92 or 95 octane gasoline?

According to the official vehicle manual recommendations, most models of the Tacqua should use 92 octane gasoline, while the Tacqua-2021-280TSI-DSG-Yue Pro Smart Connect Edition and R-Line Smart Connect Edition should use 95 octane gasoline. In addition to checking the appropriate gasoline grade in the vehicle manual, the Tacqua's fuel tank cap also indicates the recommended octane rating. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of new technologies, the compression ratio alone cannot determine the gasoline grade, as high-compression engines can also be tuned to use lower-octane fuel. Other factors, such as ignition timing, turbocharging technology, and Atkinson cycle technology, also play a role. Generally, the higher the gasoline octane rating, the higher the octane number and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the Tacqua occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, prolonged use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower-octane gasoline, using higher-octane fuel will not cause damage, but the increased octane number may alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles recommended to use higher-octane gasoline, using lower-octane fuel can cause engine knocking. The significantly lower octane number reduces the gasoline's ignition point, causing premature ignition during the compression stroke. If the fuel ignites before the spark plug fires, resistance occurs during the upward stroke. This resistance makes the engine run very unstably. Mild knocking only increases noise without obvious engine damage, but severe knocking indicates serious engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.
18
3
Share

How to Transfer an Out-of-Town Driver's License to Local?

You can directly go to the vehicle management office in your registered residence to complete the transfer procedures. 1. Required documents: Bring your ID card, driver's license, and photos to the vehicle management office of the municipal public traffic police detachment (you may need to submit a medical examination form from a county-level or above hospital, but you can usually get the medical examination done at the vehicle management office, as most hospitals have a medical examination station nearby). 2. Form filling: Fill out the "Motor Vehicle Driver's License Application Form," and submit your ID card, original driver's license, and copies to the window officer for review. Once approved, a new license will be issued, though in some places, you might need to return after ten days to collect it. The process is almost the same in every city. 3. Fees: Transfer fees are generally not charged, but if there are any, you just need to pay the corresponding amount.
3
4
Share

How to Inspect a Driver's License?

Driver's license inspection procedures are as follows: 1. Within 90 days before the expiration of the driver's license: The holder of the driver's license should apply for a replacement of the motor vehicle driver's license and undergo inspection within 90 days before the expiration of the current license. 2. Requirements: The applicant's points in the current scoring period have not reached 12 points; the applicant has no pending road traffic safety violations; the applicant's physical condition meets the driving license requirements; the motor vehicle driver's license is not detained, suspended, revoked, canceled, or withdrawn by law. 3. Required materials: For the annual inspection, the applicant needs to fill out the "Motor Vehicle Driver's License Application Form" as required, provide the original motor vehicle driver's license, and 3 photos of the motor vehicle driver. It is also necessary to provide the original "Motor Vehicle Driver's Physical Condition Certificate" issued by a county-level or higher medical institution designated by the health bureau or a regiment-level or higher medical institution designated by the military or armed police forces. The inspection requires the original and a copy of the applicant's identity proof; if represented by an agent, the original and a copy of the agent's identity proof must also be submitted. 4. Fees: A processing fee for the motor vehicle driver's license will be charged during the inspection, usually 10 yuan.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.