How many years is the Ford EcoSport transmission warranty?

What are the reasons why the Haval H2s cannot disengage from P gear?

If the transmission cannot disengage from P gear, it is likely due to cold weather and insufficient starting voltage. The solution is to drive the car more, requiring multiple starts or reconnecting the battery. Definition of Dual-Clutch Transmission (DCT): The Dual-Clutch Transmission (DCT) differs from conventional automatic transmission systems. Based on manual transmission yet belonging to automatic transmission, it not only offers the flexibility of manual transmission and the comfort of automatic transmission but also provides uninterrupted power output. Advantages of Dual-Clutch Transmission: The shift time of a dual-clutch transmission is extremely short, even faster than that of a manual transmission, taking less than 0.2 seconds. Because the dual-clutch transmission eliminates torque interruption, it ensures that the engine's power is continuously utilized and always operates at its best, thereby significantly saving fuel. Compared to traditional planetary gear automatic transmissions, it is more conducive to improving fuel economy, reducing fuel consumption by approximately 15%.

18

2

Share

Why is the ABS yellow light on in a sedan?

When a car displays the ABS light, it indicates a malfunction in the vehicle's Anti-lock Braking System. During emergency braking, if the wheels lock up, the vehicle may lose control and skid, preventing the driver from decelerating or adjusting the vehicle's trajectory, which poses significant safety risks. The ABS light can illuminate in various states, each with different causes and solutions, as detailed below: State 1: ABS warning light stays on (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle speed and the wheel's slip rate, thus failing to issue appropriate commands to adjust braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal due to loose connections in the system wiring or poor contact in the ABS relay, leading to system failure. Solution: Check the wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As the engine speed increases and the voltage rises, the ABS indicator turns off. This may also occur if the ABS system's power supply voltage is too low, such as due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; poor contact in the ABS hydraulic valve body's wiring connector; ABS computer malfunction. Solution: Loosen and then retighten the grounding screw on the hydraulic valve body, cleaning the contact surface if necessary; check if the connector gap has widened; replace the ABS or ABS/ASR computer. State 4: ABS warning light illuminates during high-speed driving. Cause: At high speeds, the ABS computer detects a significant discrepancy between the rear and front wheel speed signals; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal, push the brake switch linkage down fully with a finger, then release the brake pedal to complete the self-setting position; replace the brake light switch if necessary.

5

Share

What is the rear suspension of the Audi A6?

Audi A6's rear suspension is multi-link. Vehicle dimensions: The dimensions of the Audi A6 are 488mm in length, 1810mm in width, and 1475mm in height. The Audi A6 is a luxury car produced by Audi, available in both sedan and station wagon models. Audi A6 features: The features are more luxurious, more dynamic, and more mature. The increased luxury is mainly reflected in the BOSE audio system, TV/DVD, and refrigerator, all of which are world-class brand products. The enhanced dynamism is reflected in the sports seats and steering wheel. The increased maturity is demonstrated by the Audi A6's multiple successful upgrades, which have not only reached a new standard but also exhibit strong reliability.

13

5

Share

What does it mean when the ABS light on the car dashboard is on?

When the car displays ABS, it indicates a malfunction in the vehicle's Anti-lock Braking System. During emergency braking, if the wheels lock up, the vehicle may lose control and skid, making it difficult for the driver to slow down or adjust the vehicle's trajectory, posing significant safety risks. The ABS light can illuminate in various states, each with different causes and solutions, as detailed below: State 1: ABS warning light stays on continuously (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting its ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle speed and wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal transmission due to loose connections in the system wiring or poor contact in the ABS relay, leading to system failure. Solution: Inspect the wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage may drop below 10.5V. As the engine speed increases, the voltage rises, causing the ABS light to turn off. This can also occur if the ABS system's power supply voltage is too low due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and verify the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light remains on after engine startup and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body, loose wiring connections in the valve body, or a faulty ABS computer. Solution: Loosen and then retighten the grounding screw of the hydraulic valve body, clean the contact surface if necessary, check for enlarged terminal gaps, and replace the ABS or ABS/ASR computer if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: The ABS computer detects a significant discrepancy between the rear and front wheel speed signals during high-speed driving, possibly due to incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, usually found on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch or poor internal contact in the brake light. Solution: Start the engine, press the brake pedal, manually push the brake switch linkage down fully, then release the pedal to reset its position. Replace the brake light switch if necessary.

15

3

Share

What does 'off' represent in Geely vehicles?

ESPOFF refers to the switch for turning off the Electronic Stability Program (ESP). The ESPOFF switch can be found on the center console. Although different car models may have different names for it, the symbol is relatively standardized. Scenarios requiring pressing the ESPOFF switch: When the vehicle is stuck in mud or sand during off-road driving, when aggressive driving such as drifting is desired, or when snow chains are installed on the vehicle. Usage of the ESPOFF switch: During normal road driving, including highways, snowy conditions, or rainy weather, there is no need to use it. Only remember to press the ESPOFF switch when preparing for off-road driving in mud/sand, planning to drift, or installing snow chains.

16

1

Share

Does the China VI Honda Fit have a particulate filter?

The China VI Honda Fit is equipped with a particulate filter. The Diesel Particulate Filter (DPF) is a ceramic filter installed in the diesel engine's emission system, which captures particulate emissions before they enter the atmosphere. Its function is to filter out tiny particles in the exhaust gas. When a certain amount of particles accumulates, it automatically burns off the captured particles, thus achieving a cyclic operation. The diesel particulate filter can effectively reduce particulate emissions. It first captures the particulate matter in the exhaust gas and then oxidizes the captured particles to regenerate the filter. The so-called filter regeneration refers to the fact that during long-term operation of the DPF, the gradual increase of particles in the filter will cause an increase in engine backpressure, leading to a decline in engine performance. Therefore, it is necessary to periodically remove the deposited particles to restore the DPF's filtration performance. A clogged particulate filter can reduce vehicle power. Some vehicle models will automatically reduce the power output of the diesel engine if they detect a clogged particulate filter. At the same time, the increased exhaust resistance will also weaken the vehicle's power performance.

5

2

Share

How many years is the Ford EcoSport transmission warranty?

What are the reasons why the Haval H2s cannot disengage from P gear?

Why is the ABS yellow light on in a sedan?

What is the rear suspension of the Audi A6?

What does it mean when the ABS light on the car dashboard is on?

What does 'off' represent in Geely vehicles?

Does the China VI Honda Fit have a particulate filter?

What is the displacement of the Mercedes-Benz S350?

What is the normal pressure for the Envision's high-pressure fuel pump?

Is there a difference between the BMW 320li Progressive and Fashion models?

Are the headlights of the Geely Emgrand integrated for high and low beams?