How many years does it take to learn to repair new energy vehicles?

1 Answers
KyleRose
07/30/25 9:28am
With dedicated study, it generally takes about one year to become capable of independently repairing vehicles. New energy vehicles refer to automobiles that use unconventional vehicle fuels as power sources (or conventional vehicle fuels with new onboard power devices), integrating advanced technologies in vehicle power control and drive systems to form vehicles with advanced technical principles, new technologies, and novel structures. Additional extended information is as follows: Overview: In China, the most common new energy vehicles are EV and HEV models, with most green-plated vehicles on the road falling into this category. Of course, range-extended electric vehicles or hydrogen fuel cell vehicles can also qualify for new energy license plates, but due to cost or technological limitations, they have not yet been widely popularized. Others: New energy vehicles include those powered by compressed natural gas, liquefied petroleum gas, liquefied natural gas, and ethanol. Currently, many countries and regions have made significant progress in promoting such vehicles, which will also become a trend in the future development of the global automotive industry.
Was this review help?
2
0
Share
More Forum Discussions

How to Turn on the High Beam on a Mercedes-Benz?

High beam is one of the important functions of a car. It adjusts the intensity of the light beam based on the distance of the filament during night driving, improving visibility and expanding the field of view. The specific steps to turn on the high beam on a Mercedes-Benz are as follows: 1. Locate the control lever on the left side of the steering wheel. 2. You will see several light control buttons on the lever. If the lever is operated directly up and down, it controls the turn signals. 3. Rotate the outermost ring of the lever toward the instrument panel. 4. When the low beam is on, push the lever toward the instrument panel to activate the high beam.
13
3
Share

Under what circumstances is it generally necessary to depress the clutch?

When driving a manual transmission vehicle, you need to depress the clutch when starting or shifting gears. The specific situations are explained as follows: Depressing the clutch when starting and engaging a gear: Before starting the vehicle, first depress the clutch pedal to disengage the clutch, separating the engine from the drivetrain. Then, engage first gear and gradually release the clutch pedal to allow the clutch to gradually engage. Depressing the clutch when shifting gears: Additionally, you need to depress the clutch when shifting gears. Since the clutch and gear position are in an opposing relationship, the clutch must be depressed during gear shifts. When not shifting gears, releasing the clutch allows the vehicle to operate normally.
1
2
Share

What is the engine model of the Infiniti QX30?

The engine models of the Infiniti QX30 are the 1.6T turbocharged engine and the 2.0T turbocharged engine. The 1.6T engine has a maximum power of 156 horsepower and a maximum torque of 250 Nm; the 2.0T engine has a maximum power of 211 horsepower and a maximum torque of 350 Nm. Both engines are paired with a 7-speed dual-clutch transmission. The Infiniti QX30 is positioned as a luxury compact SUV, featuring either front-engine rear-wheel drive or front-engine four-wheel drive. Its dimensions are 4425mm in length, 1815mm in width, and 1513mm in height, with a wheelbase of 2700mm.
2
3
Share

How to Adjust the Mini Steering Wheel

Here are the steps to adjust the Mini steering wheel: 1. Release the steering wheel lock lever, located beneath the steering wheel; 2. Adjust the steering wheel, which can only be moved up/down and forward/backward. The adjustment direction is the same as the seat. Hold the steering wheel and move it to adjust; 3. After adjusting the steering wheel to a suitable position, make sure to lock the lever securely. Failure to do so may lead to accidents while driving; 4. Check for comfort. Sit in the driver's seat, simulate driving movements, and ensure smooth operation. If uncomfortable, readjust until finding the optimal position.
16
5
Share

What is the engine model of the Vision?

The engine model of the Vision is JL4G15, which is a 1.5-liter naturally aspirated engine. The Vision is a compact sedan, and this model is equipped with only one engine across the entire lineup. This 1.5-liter naturally aspirated engine has a maximum power output of 80 kilowatts, a maximum torque of 142 Newton-meters, a maximum power speed of 6000 revolutions per minute, and a maximum torque speed of 4400 revolutions per minute. The dimensions of the Vision are 4599 millimeters in length, 1747 millimeters in width, and 1482 millimeters in height, with a wheelbase of 2615 millimeters. The upgraded version of the new Vision complies with the China VI emission standards and is equipped with a new CVT transmission.
12
0
Share

What does OBD mean on a diesel vehicle?

OBD on a diesel vehicle stands for "On-Board Diagnostics." OBD is the abbreviation for On-Board-Diagnostics. The main function of this system is to monitor the engine while driving. Once the exhaust emissions exceed the standard (i.e., 1.5 times the emission standard for new vehicles), the malfunction indicator light will be illuminated, and a fault code will be stored. Relevant information about OBD is as follows: 1. The OBD device monitors multiple systems and components, including the engine, catalytic converter, particulate trap, oxygen sensor, emission control system, fuel system, EGR, etc. 2. OBD connects various emission-related component information to the Electronic Control Unit (ECU), which has the capability to detect and analyze faults related to emissions.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.