How Many Years Does a New Car Need to Undergo Annual Inspection?

2 Answers
Tyler
08/31/25 2:20am
New cars generally require an annual inspection after six years. Here is the relevant information: Inspection Content: Annual inspection refers to the annual or biennial safety inspection of a vehicle, which includes a comprehensive check of components such as the horn, brakes, axle weight, chassis, ignition system, lighting system, exhaust system, license plate installation, etc. The annual inspection is a routine review conducted on a yearly basis, typically referring to the inspection of certain formal IC cards, etc. Purpose of Annual Inspection: It is a mandatory test for every vehicle that has obtained an official license plate and registration certificate. Its purpose is to promptly eliminate potential safety hazards, encourage and enhance vehicle maintenance, and reduce the occurrence of traffic accidents, commonly referred to as vehicle inspection.
Was this review help?
11
2
Share
VonAxel
09/12/25 5:53am
When I first bought my car, I also thought there was no rush to get it inspected since it was brand new. Later, I learned that in China, for the first 6 years after a new car is registered, the annual inspection is required every two years. Specifically, a new car doesn’t need inspection in the first and second years, and the biennial inspection starts from the third year. This design is because new cars have less wear and tear, saving unnecessary hassle. I remember being worried about my first inspection, but it turned out to be quick—checking brake lights and such—and the cost was low. I recommend all car owners go on time; otherwise, overdue inspections may result in fines and could affect future transfers or sales. Pay attention to your car’s condition regularly, like tire pressure and lights, and do a quick self-check before the inspection to save trouble. Overall, the inspection cycle for new cars is quite user-friendly.
Was this review help?
8
5
Share
Expand All
More Forum Discussions

What are the performance features of the Audi A3?

Audi A3 performance is equipped with 1.4T and 1.8T engines, paired with a 6-speed manual transmission or 7-speed Stronic dual-clutch transmission. Key advantages: abundant power. Main disadvantages: lower configuration, not cost-effective. Handling: The Audi A3 has a solid chassis; the entire lineup is matched with a 7-speed dual-clutch transmission and a manual-automatic integrated gearbox; the steering wheel is light; the suspension is firm; gear shifting is smooth without any jerking; road feedback is clear; the chassis tuning is quite firm; however, wind noise becomes noticeable at high speeds. Power: The Audi A3 delivers strong overall performance with quick acceleration. Fuel consumption: According to feedback from most users, the Audi A3's average fuel consumption is around 10 liters per 100 kilometers.
7
3
Share

Why is the Subject One Test Reservation Still Under Processing?

There are several possible reasons why the driving test reservation shows as under processing: The reservation deadline has not yet been reached. The number of reservations has not reached the predetermined quota, causing the deadline to be postponed. For online Subject One test reservations, the result (success or failure) is usually displayed within 24 hours after submission. If the page continues to show "under processing," it means the reservation was unsuccessful, and you need to cancel and resubmit the reservation. For first-time Subject One test reservations, the order is based on the submission time. If a reservation is canceled due to personal reasons after being successfully booked, the order is based on the cancellation time. For non-first-time reservations, the order is based on the previous test time, unless canceled for reasons beyond the applicant's control (e.g., power outage at the testing center, network failure preventing completion of the test), in which case the ranking time remains unchanged. For Subject Two and Subject Three road driving skill tests, the number of attempts must not exceed five times each (i.e., a total of ten test opportunities). If the Subject Two test shows as "under processing," it means the system has received the reservation request and is scheduling the date and session for applicants. If it remains in this status for an extended period, it indicates the request has been pushed out due to exceeding the available slots.
16
3
Share

How to Start with One-Button Start?

The method to start a car with one-button start: After the owner opens the door and enters the car, press the brake and lightly press the one-button start button to start the car. Here are the advantages of the car's one-button start: 1. Unlike the traditional mechanical key ignition method and the traditional starting procedure, simply pressing the one-button start button can start or turn off the engine, avoiding the hassle of losing or searching for keys. Most of the time, the brake pedal needs to be pressed during the ignition process. 2. The starting button procedure is entirely controlled by a chip for conversion, ensuring stable and reliable performance. It simulates the original car key starting mode OFF-ACC-ON-START-ON-OFF, normally achieving each function. 3. Intelligent sensing entry (opening the door)—When approaching the vehicle, the RFID intelligent detection system will automatically unlock the door within a range of 1.0-2.0 meters. The sensing distance is stable and non-directional, accompanied by flashing turn signals and a short honk with light and sound prompts. When approaching the door at a normal speed, the system will automatically unlock. 4. Intelligent sensing entry (closing the door)—When leaving the vehicle, if the RFID detection system cannot find the signal of the "smart key" within the set range, it will immediately lock all four doors. At the same time, the turn signals will flash, and a short honk will sound to remind the owner that the vehicle has automatically entered the anti-theft state.
8
0
Share

Where is the child lock button on the BMW 320?

The child lock button on the BMW 320 is located on the rear door, with the switch function key positioned on the door guardrail of the driver's seat. BMW 320 steering wheel buttons: The left buttons primarily control speed limit functions, including the speed limit switch, limit speed adjustment, and settings. The right buttons manage the multimedia system and voice commands, featuring the confirm button, volume control, previous track, next track, intelligent voice, and menu selection options. Steering wheel position adjustment: The adjustment switch is located on the lower left side of the steering wheel. Pull up the lever to move the steering wheel. This method of adjusting the steering wheel position requires manual movement of the steering wheel, tightening the lever when the desired position is achieved. There is also an electric switch option, allowing for immediate four-way adjustment via the switch.
8
2
Share

What Are the Basic Knowledge Points for Car Maintenance?

Cars are prone to issues such as failure to start, steering wheel vibration at high speeds, and heavy steering. Below is relevant maintenance knowledge: 1. Failure to start: (1) First, check if components like the high-voltage wires have gotten wet due to rain. If so, dry the wet parts before attempting to start. (2) Next, inspect the spark plugs for damage. If damaged, simply replace them with new ones. (3) Check if the battery voltage is sufficient. Sometimes, leaving the lights on after parking can drain the battery. In such cases, put the car in second gear, press the clutch, and use another vehicle to tow (not recommended; it's better to have someone push). Once reaching a certain speed, release the clutch and turn the ignition switch (not recommended; the ignition should be turned on before pushing). If the issue is with the alternator, this method won't work. 2. Steering wheel vibration at high speeds: If the car feels unstable or the steering wheel shakes at high speeds, first check the tire balance if alignment and other components are fine. 3. Heavy steering: Causes include low tire pressure (especially in front tires), insufficient power steering fluid, or incorrect front wheel alignment. 4. Pulling to one side: To check, drive straight and release the steering wheel. If the car doesn't go straight, it's pulling. This could be due to uneven tire pressure or incorrect front wheel alignment. 5. Poor headlight sealing: If headlights aren't sealed properly, they can let in water during washing or rain, causing fogging due to temperature differences. Avoid high-temperature drying, as it can soften plastic parts or melt adhesive, worsening the issue. Normally, sunlight can evaporate moisture inside headlights. Frequent water ingress may indicate damage from collisions, requiring a service check.
19
5
Share

What are the causes of transmission failure in the 2012 New Focus?

2012 New Focus transmission issues are primarily caused by oil seal leakage and transmission TCM problems. Additional details about the Focus are as follows: 1. Exterior: The body lines are simple yet dynamic, with a bold front face that is very appealing. The car is sturdy, and the door closing sound is solid and powerful. It measures 4534 mm in length (4368 mm for the 5-door version), 1823 mm in width, 1483 mm in height, and has a wheelbase of 2648 mm. 2. Interior: The dashboard is largely covered with soft-touch materials that feel pleasant, and it features numerous buttons, reflecting a strong sense of technology. The leather seats are comfortable and supportive, and the rear seats can be folded completely flat to expand the trunk storage space.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.