How Many Years Can Putty and Paint Last?

1 Answers
VonJaxon
07/30/25 1:12am
Generally, putty and paint can last for 2 to 3 years. Automotive Painting Process: After metal sheet repair is completed, it is handed over to the painting department for pre-painting treatment, which takes two to five hours. Before painting, the repair area must be thoroughly cleaned, an evaluation of the work process is conducted, and non-repair areas are masked off. There are 12 steps in the treatment process, and if the primer is damaged, rust-proofing treatment is also required. Starting the Painting: Painting also involves several steps, briefly summarized as: rust-proof paint, body filler, first coat primer, mid-coat primer, and topcoat. Completing these steps takes 2-4 hours, with the most critical step being color matching, making the entire process quite complex. Paint Surface Treatment: Removing pinholes and achieving a mirror finish. This is commonly referred to as grinding, polishing, and waxing, which also takes 2-3 hours to complete.
Was this review help?
18
4
Share
More Forum Discussions

How to Turn on the Heating Air Conditioning in the Tiguan L?

After starting the Tiguan L, wait approximately 8-15 minutes for the water temperature to rise to the normal operating level before turning on the heating. When the water temperature reaches the middle range, adjust the air conditioning circulation mode to internal circulation and set it to heating mode, but do not turn on the AC switch. The method to activate the car's heating system is as follows: 1. After starting the car, wait about 8-15 minutes for the water temperature to reach normal operating temperature (i.e., when the gauge reaches the middle range) before activating the heating. 2. Switch the air conditioning circulation to internal recirculation mode. 3. Set to heating mode (indicated by a red zone or sun symbol on some vehicles). 4. Do not turn on the AC switch, as the heating system utilizes the car's own heat cycle, which saves energy. 5. Adjust the air conditioning to an appropriate fan speed and direct the airflow as desired. 6. Typically, heated air should be directed toward the front and footwell areas, while cooled air is usually directed forward.
20
3
Share

What is the method to reset the maintenance light for the 2018 Dongfeng Honda CR-V?

The 2018 CR-V maintenance light can be reset using the following three methods: 1. Using the function buttons on the steering wheel. a. Turn the CR-V's power to ON mode. b. Repeatedly press the (Display/Information) button until "Maintenance" appears on the screen. c. Press the Enter button, and the engine oil monitor will appear on the screen. d. Finally, hold the Enter button for about 10 seconds, and the maintenance light will reset successfully. 2. Using the function buttons on the steering wheel. a. Turn the CR-V's power to ON mode. b. Repeatedly press the (Display/Information) button until "Maintenance" appears on the screen. c. Press the Enter button, and the engine oil monitor will appear on the screen. d. Finally, hold the Enter button for about 10 seconds, and the maintenance light will reset successfully. 3. Visit an authorized Honda service center. When the maintenance light comes on, you should go to an authorized service center as soon as possible for maintenance. The technicians there will reset the maintenance light using a car diagnostic tool. However, if the light does not reset after maintenance, you will need to follow the steps mentioned above to reset it. Resetting the CR-V maintenance light is essential for the accuracy of the next maintenance data, so this step is very necessary.
14
1
Share

Is Low Tire Pressure Due to a Leak?

Low tire pressure in a car refers to the situation where the air pressure inside the tire is too low, resulting in insufficient tire pressure. In such cases, it is necessary to inspect the tire and adjust the air pressure. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes the steering wheel to feel heavy and makes the vehicle prone to drifting, which are factors detrimental to driving safety; Increases the movement of various parts of the tire, leading to excessive rolling and abnormal heat generation in the tire; Reduces the functionality of the cord and rubber, causing delamination or cord breakage, excessive friction with the rim, resulting in damage to the bead area and abnormal wear; Multiplies the friction between the tire and the ground, causing a sharp rise in tire temperature, softening of the tire, and a rapid decrease in strength. High-speed driving under these conditions may lead to a tire blowout; Increases tire body deformation, making the tire side more prone to cracking, while generating flexing motion, leading to excessive heat, accelerating rubber aging, fatigue in the cord layer, and cord breakage. It also increases the tire's contact area with the ground, accelerating wear on the tire shoulder.
1
2
Share

How to Set Up Automatic Window Closing When Locking a BMW?

Open the driver's side door, press the one-touch start button, hold down the lock button without releasing it, and pull up the window button for 10 seconds continuously. If the engine is running during this operation, the system cannot memorize the setting.
8
4
Share

What Insurance Should You Generally Buy for a Family Sedan?

Generally, you should purchase compulsory traffic insurance, third-party liability insurance, and vehicle damage insurance. Below are the relevant introductions to these types of insurance: 1. Compulsory Traffic Insurance: The full name of compulsory traffic insurance is "Compulsory Motor Vehicle Traffic Accident Liability Insurance." It is a mandatory liability insurance where the insurance company compensates for personal injuries, deaths, and property losses of victims (excluding passengers in the insured vehicle and the insured) caused by road traffic accidents involving the insured vehicle, within the liability limits. 2. Third-Party Liability Insurance: Like compulsory traffic insurance, third-party liability insurance compensates the affected third party, essentially serving as a supplement to compulsory traffic insurance. The compensation limit of compulsory traffic insurance is limited and relatively low, with a maximum of only 122,000 yuan. For third-party liability insurance, it is recommended to insure between 500,000 to 1 million yuan. If financial conditions permit, you can opt for 1.5 million yuan or higher coverage. 3. Vehicle Damage Insurance: Vehicle damage insurance compensates for the loss of your own vehicle. The premium for vehicle damage insurance is closely related to the purchase price and the number of seats of the car. In other words, the higher the car price, the higher the premium.
15
1
Share

How to put a BMW X5 in neutral for towing?

First, locate the dedicated "red gear lever", then remove the insert from the cup holder in front of the gear lever. Insert the "red gear lever" into the position in the cup holder, rotate it half a turn to unlock, and finally you can shift into "N" gear.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.