How many years can a new car be exempt from inspection?

3 Answers
ArabellaLee
07/24/25 4:47pm
Six-year exemption policy for new cars The motor vehicle must be a non-operational vehicle; The approved number of vehicles is 6 or fewer. The vehicle type indicated on the driving license The registration date must be after September 1, 2010; Vehicles that meet the above conditions and have not been involved in any traffic accidents causing casualties during the exemption period can enjoy the six-year exemption policy. However, the correct term for exemption here should be that the on-site inspection is exempted, but we still need to obtain the annual inspection sticker, which is unavoidable. Every two years, we must apply to the DMV or online to obtain the annual inspection sticker.
Was this review help?
20
2
Share
BenjaminLynn
08/10/25 7:52am
When I first bought my car, new vehicles could enjoy a six-year exemption from on-site inspections, which was quite convenient. During this period, the car didn’t need to undergo annual on-site checks, but I still had to visit the vehicle management office every two years to apply for the inspection compliance sticker to avoid penalties for forgetting. After six years of driving, the car must start undergoing regular on-site inspections—once every two years for the first four years, and annually after ten years. It’s important to develop a habit of checking the car’s condition regularly, such as changing the engine oil and inspecting brake pads, to ensure safe driving. The policy’s original intent was to reduce hassle for car owners and encourage timely maintenance to prevent costly major repairs caused by accumulated safety hazards.
Was this review help?
1
3
Share
Expand All
DeBrianna
09/25/25 8:28am
How many years can a new car be exempt from inspection? The first six years indeed exempt from on-site inspection, but don't think it's completely worry-free. From my driving experience, regular maintenance during this period cannot be neglected, otherwise accelerated aging may cause problems earlier. After six years, the inspection frequency increases, mainly focusing on safety items like emissions, brakes, and lights. This rule is based on vehicle reliability - new cars are in stable condition so exempt from inspection, but as wear increases over time, professional inspections are needed to prevent accidents. I recommend using this exemption period to learn basic car maintenance knowledge, which can both save money and ensure safety.
Was this review help?
7
3
Share
Expand All
More Forum Discussions

Standard Dimensions of Roadside Parking Spaces?

According to the "Specifications for Setting On-Street Parking Spaces on Urban Roads," the standard dimensions of general parking spaces are determined based on vehicle size. Small parking spaces typically measure 2.5~2.7 meters in width and 5~6 meters in length. The width of a single-lane turning lane should be no less than 3.5 meters, while a double-lane turning lane should be no less than 5 meters. The turning area should accommodate a vehicle's one-time turning needs. For safety or to accommodate medium and large vehicles, parking spaces are often set to 6 meters or longer. Details are as follows: (Length ≤ 6m, width ≤ 1.8m): The spacing between vehicles should be no less than 0.5 meters, and the distance between a vehicle and walls or the ends of the parking space should also be no less than 0.5 meters. (6m < length ≤ 8m, 1.8m < width ≤ 2.2m): The spacing between vehicles should be no less than 0.7 meters. Small vehicle parking space: Length ≥ 5 meters, width 2.2–2.5 meters. Large vehicle parking space: Length 7–10 meters, width 4 meters, depending on the vehicle type. Per the "Architectural Design Specifications for Parking Garages," the dimensions for small car parking spaces in indoor garages are as follows: The external design dimensions of small cars are 4.8m (length) × 1.8m (width) × 2.0m (height). For perpendicular parking, the minimum parking space size should be 5.3m (length) × 2.4m (width), with a minimum driveway width of 5.5m at the front. The minimum distance between small cars and side walls should be 0.6m, and the distance to front/rear walls should be 0.5m. Modern underground garages have large floor areas and numerous parking spaces. To ensure smooth vehicle movement, driveways are planned to be relatively wide. Driveways, as horizontal passages dedicated to parking spaces, account for a significant portion of the floor area—often 50% or more of the total parking space area. Parking space arrangements can be categorized into three types: parallel, angled (30°, 45°, 60°), and perpendicular. Large vehicle parking spaces should not use angled or perpendicular arrangements. Details are as follows: Parallel parking space: Standard length 6m, width 2.5m. Angled parking space: Diagonal length 6m, width 2.8m, with a vertical distance of 2.5m between the two angled lines. Perpendicular parking space: Length ≥ 5m (typically 6m), width 2.5m. The optimal standard size is 2.5m × 5.3m. The "Road Traffic Safety Law" stipulates that on-street parking spaces are prohibited on roads with a width of less than 6m, as well as on crosswalks, expressways, and main roads. On urban roads, government authorities may designate parking spaces where pedestrian and vehicle traffic is not impeded. On-street parking spaces should not interfere with non-motorized vehicle passage or encroach on their space. They should not be set near intersections, building entrances, or bus stops. Parking restrictions (e.g., vehicle type, time limits) must be clearly marked with signs. Measures should be taken to avoid obstructing traffic flow. Additionally, on-street parking spaces must not have ground locks to prevent private occupation. Roads where parking is prohibited may feature barriers, bollards, or curbs. When parking spaces are removed, all related markings and signs must be cleared promptly to prevent illegal parking. On-street parking spaces should not be set within 200m–300m of off-street public parking lots. Quantitative rules for on-street parking space setup: The "Specifications for Setting On-Street Parking Spaces on Urban Roads" provide quantitative guidelines based on road width. For two-way roads: if the actual width exceeds 12m, parking spaces may be set on both sides; if between 12m and 8m, parking may be allowed on one side; if less than 8m, no parking spaces are permitted. For one-way roads: if the actual width exceeds 9m, parking may be allowed on both sides; if between 9m and 6m, parking may be allowed on one side; if less than 6m, no parking spaces are permitted. For disabled parking spaces, the specifications require that at least 2% of total parking spaces be designated for disabled use, with a minimum of one space if there are 20 or more parking spots. Parking space marking colors: White: Paid parking spaces. Blue: Free parking spaces. Yellow: Reserved parking spaces. Time-limited parking spaces: Dashed borders (10cm line width) with permitted parking times marked inside (60cm-high numbers). Disabled parking spaces: Special markings with yellow grid lines on both sides indicating no-parking zones for boarding/alighting. Other vehicles must not occupy these spaces. The yellow grid lines should be 120cm wide, with 20cm outer lines and 45° internal angles matching the parking space length. Prohibited areas for on-street parking spaces: Fire lanes, roads with no-parking signs/markings, or construction zones that impede traffic. Roads designated for disaster relief or emergency evacuation. Sidewalks (if set, must not encroach on tactile paving for the visually impaired). Near building entrances. Within 50m of intersections, railroad crossings, sharp curves, narrow roads (<4m), bridges, steep slopes, or tunnels. Within 30m of bus stops, emergency stations, gas stations, fire hydrants, or fire stations (except for authorized vehicles). Within 20m of intersection channelization zones. Within 15m of underground utility (water, electricity, gas) access points. Within 200m of off-street parking lot entrances.
14
1
Share

Are the Lingdong and Yuedong equipped with the same engine?

Lingdong and Yuedong are equipped with the same engine, both featuring a 1.6L naturally aspirated inline four-cylinder Gamma engine. The reason why the Yuedong is significantly longer than the earlier Hyundai i30 is primarily due to its body structure, which draws inspiration from the design style of the SAIC Volkswagen Lavida Tour, positioning it between a standard hatchback and a station wagon, thus offering a longer trunk space. The Lingdong measures 4610mm in length, 1800mm in width, and 1450mm in height, with a wheelbase of 2700mm. The Yuedong measures 4510mm in length, 1765mm in width, and 1470mm in height, with a wheelbase of 2650mm.
18
5
Share

Is the Subaru XV a horizontally opposed engine?

The Subaru XV is equipped with a 2.0-liter naturally aspirated horizontally opposed engine. It is a compact SUV under the Subaru brand, featuring spacious interior, luxurious and convenient amenities, and a clever design that provides drivers and passengers with a comfortable, stylish, and high-quality experience. In terms of body dimensions, the Subaru XV measures 4495mm in length, 1800mm in width, and 1615mm in height, with a wheelbase of 2665mm. The vehicle is a 5-door, 5-seat SUV, fitted with a CVT continuously variable transmission, delivering a maximum power of 113kw and a maximum torque of 196nm. The front suspension type is MacPherson independent suspension.
13
3
Share

How to Adjust the Seat in a Mercedes-Benz Sedan?

The method to adjust the seat in a Mercedes-Benz sedan is: 1. Press the multifunction button for the seat on the door handle; 2. Adjust to the desired seat position according to the corresponding graphic position. Models under the Mercedes-Benz brand include: Mercedes-Benz A-Class, Mercedes-Benz GLC, Mercedes-Benz S-Class, Mercedes-Benz B-Class, Mercedes-Benz C-Class, etc. Taking the Mercedes-Benz A-Class as an example, its body dimensions are: length 4622mm, width 1796mm, height 1454mm, wheelbase 2789mm, fuel tank capacity 43l. The Mercedes-Benz A-Class is equipped with a 1.3T turbocharged engine, with a maximum horsepower of 136PS and a maximum power of 100kW.
7
0
Share

How to Lift Up the Rear Seats of the Buick Verano?

The method to lift up the rear seats of the Buick Verano is as follows: 1. Push the seat backrest all the way back until it locks; 2. Check for any foreign objects stuck between the seat cushion and the backrest; 3. Lift the seat from the end upwards. Taking the 2020 Buick Verano Automatic Base Model as an example, its body dimensions are: length 4723mm, width 1802mm, height 1466mm, with a wheelbase of 2700mm, a fuel tank capacity of 52 liters, and a trunk capacity of 455 liters. The 2020 Buick Verano Automatic Base Model is equipped with a 1.0T turbocharged engine, delivering a maximum horsepower of 125 and a maximum power of 92 kW, paired with a 6-speed automatic transmission.
4
2
Share

Which region does the 'Min' license plate represent?

The 'Min' license plate represents Fujian Province. Fujian (abbreviated as 'Min') is a provincial-level administrative region of China, with Fuzhou as its capital. Fujian is located on the southeast coast of China, bordering Zhejiang Province to the north, Jiangxi Province to the west, Guangdong Province to the south, and facing Taiwan across the strait. The license plate codes for various regions in Fujian Province are as follows: MinA for Fuzhou, MinB for Putian, MinC for Quanzhou, MinD for Xiamen, MinE for Zhangzhou, MinF for Longyan, MinG for Sanming, MinH for Nanping, MinJ for Ningde, MinK for provincial government agencies, and MinO for the Provincial Public Security Department. A license plate, commonly known as a vehicle plate, is a panel mounted on the front and rear of a vehicle, typically made of aluminum, sheet metal, plastic, or paper, displaying the vehicle's registration number, registration region, and other relevant information. License plates serve to number and register vehicles, with their primary function being to identify the vehicle's region of registration and to trace the vehicle's owner and registration details based on the plate.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.