How Many Years Can a Car Generally Be Driven?

1 Answers
SanRhett
07/29/25 9:59am
The usable lifespan of a car is not determined by its age but rather by its mileage. The government will guide the scrapping of vehicles that have reached 600,000 kilometers. Here are some methods to extend a car's lifespan: 1. Maintain good driving habits: The way a car is driven significantly impacts its lifespan. Good driving habits not only reduce wear and tear but also save fuel. Drive gently, accelerate slowly, and anticipate braking to avoid sudden stops. In cold weather, warm up the car first to allow the lubricant to circulate freely throughout the system and fully lubricate internal components. 2. Regular cleaning and weight reduction are crucial: Take care of the car's exterior with periodic washing and waxing, and don't neglect the interior. Spend time cleaning instead of just masking odors with air fresheners, and regularly vacuum the carpets. 3. Choose a trusted repair shop: Visiting different shops each time means every technician has to gradually familiarize themselves with the car, perform the same thorough inspections, identify potential issues, and then address them. This approach takes longer and may cost slightly more.
Was this review help?
19
2
Share
More Forum Discussions

Where is the middle seat belt in the back row of a car?

Generally, the middle seat belt in the back row is located on the rear ceiling, where you can see two different types of buckles. There are also two different types of sockets in the middle position, one on the left and one on the right. Seat belts are safety components used in equipment: They are straps used to ensure safety when riding aircraft or performing high-altitude work and artistic performances. The main materials are polyester, polypropylene, and nylon. Seat belts do not only refer to the webbing; besides the webbing, seat belts are also assembled with other components. One of the most important features of a car: Seat belts have become a primary consideration for drivers and passengers and are one of the most important features of a car. Traditional components for ensuring safe driving, such as rearview mirrors and side mirrors (traditional rearview systems), seat belts, AIRBAG (airbags), and ABS (anti-lock braking systems), are already familiar to most drivers and passengers and are commonly used in imported luxury cars.
14
0
Share

Can a Motorcycle Be Equipped with a Dash Cam?

Motorcycles can be equipped with dash cams. Can be used as evidence: The video footage recorded by the dash cam can serve as evidence in traffic accidents or in cases of fraud, acting as favorable proof. It legally safeguards the rights of the driver, helping to avoid disputes. Additionally, it records the journey of the vehicle, making it an excellent choice for those who enjoy road trips. Records the entire driving process with video and audio: A motorcycle's dash cam can record both video and audio during the driving process. After installation, it captures the entire journey, providing evidence in case of traffic accidents. It's important to note that the video must not be edited when used as evidence; any edited footage will be considered invalid.
13
4
Share

Is the Car Scrapped If the Engine Is Broken?

If the engine is broken, the car is not necessarily scrapped. A broken engine can be repaired, and if it cannot be repaired, a new engine can be installed as a replacement. Difference Between Recommended Scrapping and Mandatory Scrapping: Recommended scrapping suggests that the vehicle should be scrapped, but if the vehicle still meets the requirements for continued use, it does not have to be scrapped. Mandatory scrapping means the vehicle must, without exception, be scrapped. There are four criteria for mandatory scrapping: The vehicle has reached the prescribed service life; After repair and adjustment, it still does not meet the national standards for in-use vehicle safety technical requirements; After repair, adjustment, or the adoption of control technology, the vehicle still fails to meet national standards for in-use vehicle pollutant or noise emissions; The vehicle has not obtained the mandatory inspection compliance mark for three consecutive inspection cycles after the expiration of the inspection validity period.
11
3
Share

Why does fuel consumption increase after replacing brake pads?

Brake caliper not retracting, apply some grease on the caliper pins. Maintenance: Brake pads need to be replaced every 3 to 6 kilometers. In a vehicle's braking system, brake pads are the most critical component, as the effectiveness of braking entirely depends on them. Brake pads are generally composed of friction material, steel backing plate, and adhesive heat insulation layer. The steel plate should also be regularly coated to prevent rust. When the brake pad indicator light comes on, it indicates that the brake pads need replacement. If this occurs, they should be replaced promptly. Brake pads also need replacement if their thickness is less than 0.5cm. Braking working principle: It primarily relies on friction. The vehicle uses the friction between the brake pads and brake discs against the ground to effectively provide sufficient stability and controllability in the braking system, thereby ensuring the driver's safety.
7
2
Share

Why don't people opt for partial paint touch-ups?

Partial paint touch-ups may result in color discrepancies. Partial touch-ups: There are generally two methods for repairing vehicle paintwork: one is touch-up painting, and the other is full panel respray. For minor scratches, most repair shops will only fix the damaged area and its surroundings, known as touch-up painting. The advantages of this method are obvious—it's quick, simple, and material-saving. However, the drawbacks are equally apparent: it may affect aesthetics, show color differences under sunlight, and potentially leave uneven paint surfaces after repair. Full panel respray: Except for the front and rear bumpers which can be painted halfway, all other panels require full respray. If the scratch isn't severe, polishing and waxing may suffice. However, if the primer is exposed or the damage is deep, the entire door panel needs respraying. Partial resprays often show severe color mismatches—sometimes it's better not to paint at all.
11
3
Share

Why can't the front passenger door be opened from both inside and outside?

Doors that cannot be opened from both inside and outside are mostly due to faults in the locking mechanism components. Misalignment: Sometimes the door cannot be opened because it is misaligned. In this case, you can try pushing the door with your body from both inside and outside the car, or have someone assist you—one person pulling the door from the outside while another pushes it from the inside. Lower the door window: Remove the window wiper strips and trim, which will create a larger gap around the glass. Use a hook or similar tool to try pulling the cable or pushing the connection point between the cable and the locking mechanism to release it. Remove the door panel from inside the car: However, since the door cannot be opened, removing the panel can be quite difficult and may result in broken clips. After removing the trim, take off the sound insulation layer to gain better access to the locking mechanism. Try pulling the cable manually to see if it moves. If not, use a hammer and chisel or a drill to dismantle the locking mechanism. Generally, once the locking mechanism is disassembled, the door can be opened.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.