How Many Years Are Vehicles Exempt from Inspection Nowadays?

2 Answers
GenevieveDella
09/02/25 3:24am
Nowadays, if a vehicle is new, it is exempt from inspection for six years, calculated from the date of purchase. However, even though it is said that new cars are exempt from inspection for six years, the owner still needs to apply for an inspection label at the vehicle management office every two years. If the owner fails to apply, it means the vehicle did not undergo the annual inspection that year. When applying for the inspection label at the vehicle management office, the owner needs to bring some documents and pay attention to certain issues: 1. The original vehicle license must be brought; 2. The owner's ID card must be brought, and if there is an agent, the agent's ID card must also be included; 3. A valid compulsory insurance policy for the current year must be provided; 4. A valid vehicle and vessel tax or tax exemption certificate for the current year, as well as the vehicle registration certificate, must be brought.
Was this review help?
16
4
Share
LaOscar
09/14/25 5:40am
When I first got my new car, I looked into this policy. Now, for family-use small cars, you only need to undergo two on-site inspections within the first 10 years—once in the 6th year and once in the 10th year. For the first few years, there's no need to visit the inspection station; you can simply apply for the electronic inspection mark every two years through the Traffic Management 12123 app. My car, which is 3 years old, doesn’t require any inspection hassle at all—just a few taps on my phone to update the mark. This policy is especially user-friendly for regular family cars, saving both time and money. However, it’s crucial to remember to handle any overdue traffic violations, or you won’t be able to apply for the exemption mark.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

How to Repair a Broken Front Tire Bolt?

When a tire bolt breaks, it's important to determine the cause. If it's due to a factory defect, you can have it repaired under warranty at a 4S shop. Generally, it's not recommended to replace it yourself. When replacing a tire bolt yourself, note that the brake disc usually has a removal port reserved. You can use a long bolt to push the brake disc out.
7
2
Share

Why does the Buick Excelle frequently trigger false alarms?

Buick Excelle frequently triggering false alarms may be caused by the excessive sensitivity setting of its built-in anti-theft system or loose sensors under the engine hood. It could also result from short circuits in wiring, aging of control button contacts, or overly soft springs. Another possible cause is issues with the two small buttons near the front hood - simply adjusting the hood upwards may solve the problem. Relevant information about Buick Excelle is as follows: Dimensions: The new Excelle measures 4468mm in length, 1765mm in width, and 1469mm in height, with a wheelbase of 2611mm, positioning it as an entry-level compact car. Space performance: For a 175cm tall passenger sitting in the rear, there's about 3 fingers' width of headroom and more than 1 palm's width of legroom. The Excelle has maximized its interior space - while appearing unremarkable externally, its 2611mm wheelbase delivers space performance that surpasses many cars with 2650mm wheelbases, thanks to its very reasonable design.
7
0
Share

What is the installation method for the car wiper linkage?

Disconnect the wiper motor plug, lift the black cap at the fixed end of the wiper linkage, and pull it outward. Lift the wiper linkage arm (optional). Remove the fixing screw of the linkage rocker arm. Hold the wiper arm and pull it up and down to remove the wiper arm. Press the vent mesh buckle downward. After complete removal, take off the vent mesh. Use a 10mm socket to remove the fixing screw of the wiper swing shaft. Use a screwdriver to forcefully remove the wiper motor fixing screw and pull the motor outward. After removing the motor, push the linkage to the right within the vent cavity, then pull the linkage out from the left cavity hole toward the upper left. Reassemble in reverse order.
7
1
Share

How to Open the Subaru Hood?

The hood release lever is located inside the vehicle and needs to be manually operated. The lever is positioned around the foot pedal area. There is a release button on the left side of the foot pedal. Press this button to unlock the exterior hood. Insert the hood's hydraulic strut into the designated slot to prop up the hood.
14
4
Share

How to request an invoice for Speed Parking?

Enter the ETCP Parking APP -- My -- Bills. Click on any ETCP parking bill. Click on "Request Invoice" in the upper right corner to enter the invoice request page. The invoice page will directly display all eligible invoice amounts (if the amount reaches a certain threshold, shipping fees will be waived; otherwise, shipping fees will be charged upon delivery). Finally, note that "Cash Payment" and "Merchant Discounts" cannot be invoiced.
18
5
Share

What are the reasons for the 10th-generation Accord failing to start and making abnormal noises?

The reasons for the 10th-generation Accord failing to start and making abnormal noises are as follows: Insufficient battery power: The car failing to start with abnormal noises could be due to insufficient battery power. Forgetting to turn off the headlights when parking, or connecting too many external devices can drain the battery. It's important to follow proper usage norms, ensuring all lights are turned off when exiting the vehicle. If the battery warning light on the dashboard illuminates, seek professional assistance immediately. Low voltage: The cause of low voltage might be an old battery that has degraded over time, reducing its storage capacity. Listening to music or running the air conditioning without starting the engine can also drain the battery quickly. Some owners may leave the key in the accessory position while waiting in the car with the air conditioning and music on, which significantly depletes the battery. In such cases, contact a professional for help promptly. Gear not in P position when starting: Manual transmission drivers usually don’t encounter this issue, as they typically shift to neutral, engage the handbrake, and turn off the engine in one smooth motion. However, automatic transmission drivers, due to less frequent gear manipulation, might forget to shift into P or leave it in N when parking. If they don’t notice and attempt to start the car directly, it will fail to start.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.