How many years ago do cars belong to the yellow-label category?

1 Answers
ZoeMarie
07/29/25 6:30pm
Yellow-label vehicles refer to gasoline vehicles with emission levels below the National Level I emission standard and diesel vehicles below the National III emission standard. For domestically produced vehicles, those manufactured before 1996 generally fall into the yellow-label category, while imported vehicles manufactured before 1998 are classified as yellow-label vehicles. Starting from 1999, Beijing implemented the National I emission standard for motor vehicles, meaning most vehicles purchased prior to this period are considered yellow-label vehicles. Application process for yellow-label vehicle identification: Vehicle owners must submit their motor vehicle license and the "Motor Vehicle Replacement Subsidy Fund Application Form" (hereinafter referred to as the "Application Form") to the Yellow-label Vehicle Identification Office to apply. The Yellow-label Vehicle Identification Office will arrange specific testing times and locations based on the owner's application, following the principles of centralization and uniformity, and notify the applicant accordingly. Applicants must attend the designated annual inspection line for testing at the scheduled time specified by the Yellow-label Vehicle Identification Office. Only exhaust emission testing fees will be charged, and testing personnel cannot refuse inspection for any reason. Testing personnel will use the exhaust emission testing equipment at the annual inspection line to test the vehicle applying for yellow-label identification, record the data on the Motor Vehicle Pollution Inspection Certificate, and sign the document. Vehicle owners must then submit their motor vehicle license, pollution inspection certificate, and the "Application Form" to the Yellow-label Vehicle Identification Office for verification. The office staff will determine the classification based on the "Motor Vehicle Environmental Protection Inspection Mark Management Regulations." The office staff will note the identification result in the designated section of the "Application Form" and affix the environmental department's review seal. Finally, the Yellow-label Vehicle Identification Office will register and record the identified vehicles.
Was this review help?
2
5
Share
More Forum Discussions

What is the Toyota C-HR called?

Toyota C-HR is a concept car. The following details introduce the Toyota C-HR: 1. Exterior design: The Toyota C-HR made its debut at the 2016 Geneva Motor Show, positioned as a compact SUV. The overseas version features Toyota's latest 'X'-shaped front grille design. The new car adopts tail lights similar to the Honda Civic Coupe's boomerang style, with black mirror caps, body panels, spoilers, and a floating C-pillar, adding a touch of crossover sportiness. 2. Powertrain: The overseas 1.2T model has a maximum output of 85kW and a peak torque of 200N·m, paired with a simulated 7-speed CVT automatic transmission.
12
1
Share

What engine is in the Geely Emgrand car?

Geely Emgrand car is equipped with the JLY-4G15 engine. Here are more details about it: 1. The JLY-4G15 is a self-developed engine by Geely. 2. In the JLY-4G15 model, "JL" is derived from the initials of "Geely" in pinyin, "4" indicates the engine has 4 cylinders, "G" stands for gasoline-powered, and "15" represents a displacement of 1.5L. 3. The Geely Emgrand JLY-4G15 engine is a naturally aspirated engine equipped with DVVT intelligent variable valve timing technology for both intake and exhaust. It delivers a peak power of 80kw, a maximum horsepower of 109Ps, and a peak torque of 142N·m. It meets the China VI emission standard and is paired with a 5-speed manual transmission.
9
4
Share

Where Should the Jack Be Placed When Removing a Tire?

The jack should be placed on the raised section of the side rail near the tire being replaced. Below are the steps for using a jack to remove a tire: 1. For this raised section, which is usually two-layered, engage the grooved end of the jack with it. Before lifting, it's best to loosen the nuts of the tire to be removed by one turn before raising the jack; 2. Replacing the spare tire: Loosen the wheel hub nuts but do not remove them, place the jack under the car at the corresponding position, and use the lever to turn the jack's bearing to lift the car; 3. Remove the wheel hub nuts, install the spare tire, tighten the nuts, finally lower the car to the ground, remove the jack, and fully tighten the nuts.
16
2
Share

What are the consequences of overfilling the air conditioning refrigerant oil in a car?

The consequences of overfilling the air conditioning refrigerant oil in a car are: it can cause excessive pressure in the condenser and insufficient pressure in the evaporator, and in severe cases, it can lead to blockage of the expansion valve or capillary tube. Refrigerant oil, also known as refrigeration oil, is used to lubricate the moving parts inside the refrigeration compressor. In the compressor, refrigerant oil primarily serves four functions: lubrication, sealing, cooling, and energy regulation. If the system is overfilled with oil, a portion of the oil cannot quickly and completely return to the compressor, forming an oil film in the evaporator and condenser, which affects heat dissipation and results in reduced cooling capacity. Currently, China produces five grades of refrigerant oil: No. 13, No. 18, No. 25, No. 30, and No. 40.
11
4
Share

How to Use Mobile Screen Mirroring on BAIC EU5?

To use mobile screen mirroring on BAIC EU5, you need to have the latest version of the Android system and upgrade the ecolink firmware. BAIC EU5 is a pure electric compact sedan under BAIC New Energy, featuring a single motor with a maximum power of 160 kW and a maximum torque of 300 Nm. The large front grille paired with the slim headlights gives the car a fashionable and elegant look, while the side features a dual waistline design, with one line running through the front and rear door handles, adding a sporty touch. The rear design is clean and simple, with the new tail lights enhancing the vehicle's horizontal visual effect.
10
3
Share

What is the appropriate temperature for car air conditioning?

The suitable temperature for car air conditioning is: in summer, it can be set between 21 to 25 degrees Celsius, and in winter, between 25 to 28 degrees Celsius. The temperature inside the car should not differ too much from the outside environment, as this may cause discomfort to passengers. Generally, the temperature difference between the inside and outside of a car should be around 10 degrees Celsius, while for large buses, it should be between 8 to 12 degrees Celsius. To avoid air conditioning sickness, if the air conditioning needs to be used for a long time, the windows should be opened slightly at regular intervals to ensure fresh air inside the car. Additionally, car owners should try to avoid using the air conditioning for extended periods, generally not exceeding one hour.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.