How many versions of Changan Blue Core engine are there?

2 Answers
DelAngela
07/24/25 12:15pm
Changan's Blue Core engine has two versions: the 1.5-liter turbocharged engine used in the CS75, known as the first-generation Blue Core engine; and the second-generation Blue Core engine, which has not yet been widely adopted. More details about the Blue Core engine are as follows: 1. The Blue Core engine is a self-developed engine series by Changan, not a single engine. 2. The first-generation Blue Core engine delivers 178 horsepower and a maximum torque of 265 Nm, with the maximum torque available between 1,450 and 4,500 rpm and the maximum power at 5,500 rpm. 3. The first-generation Blue Core engine is paired with either a 6-speed manual transmission or a 7-speed dual-clutch transmission.
Was this review help?
7
5
Share
GrantDella
08/11/25 6:22am
I enjoy studying car engines in my spare time. The Changan Blue Core engine has gone through several versions from its early days to now. I remember the initial version was a 1.6L naturally aspirated one, suitable for basic models. Later, it was upgraded to a 1.4T GDI with turbocharging, adopting direct injection technology, which significantly improved power output. Then came the 1.5T version with stronger power, used in mainstream SUVs. There's also a high-performance 2.0T version that delivers even greater horsepower. Recently, a hybrid version was introduced, combining an electric motor for better fuel efficiency and environmental friendliness. Each version represents the result of technological iteration, such as the transition from pure gasoline to electrification, giving consumers more choices to match their daily needs or driving pleasure. I find it fascinating to understand these changes.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

What are the reasons for the brake light not working on the Baojun 310w?

The reasons for the brake light not working on the Baojun 310w include a damaged brake light bulb, a faulty light switch, or a blown fuse. Solutions: Adjust the bulb, as the bulb is used frequently, replace the new brake light bulb to solve the problem. Or check for poor contact. Use a wire to connect the brake light and check the switch, then replace the brake light switch setting. Check the non-working electrical equipment in the vehicle and replace the fuse. Slow down and go to a regular repair shop for replacement and repair, or look for brake light bulbs, brake light switches, and fuse products for self-replacement. The role of the brake light: The brake light is generally installed at the rear of the vehicle, with a main color of red to enhance the penetration of the light source, so that vehicles behind can easily detect the braking of the vehicle in front even in low visibility conditions, helping to prevent rear-end collisions. In simple models, the power passes through the fuse to the brake switch. When the brake pedal is pressed for braking, the switch connects, and electricity is sent to the two brake lights and one high-mounted brake light, forming a circuit through the negative wire connected to the vehicle body.
10
4
Share

Are the engines of the Haval H6 and M6 the same?

The Haval H6 Sport version shares the same engine as the M6, while the all-new generation Haval H6 has a different engine from the M6. Haval H6 Engine Introduction: The Haval H6 Sport version is still equipped with the previous 1.5T turbocharged engine, which delivers 110 kW of power and 210 Nm of torque. It is paired with either a Getrag dual-clutch transmission or a six-speed manual transmission. The all-new generation Haval H6, on the other hand, features the latest in-house developed direct-injection turbocharged engine from Great Wall. It comes in two displacements: 1.5T and 2.0T. The 1.5T variant produces 124 kW of power and 285 Nm of torque, with maximum torque available from as low as 1400 rpm. Both performance and fuel efficiency are significantly improved compared to the previous 1.5T turbocharged engine. Haval M6 Engine Introduction: The Haval M6 uses the older 1.5T turbocharged engine with 110 kW of power and 210 Nm of torque. It is paired with either a six-speed manual transmission or a seven-speed dual-clutch transmission.
15
2
Share

What engine is used in the Baojun 330?

The Baojun 330 is equipped with a 1.5-liter naturally aspirated engine across all variants. As the Baojun 330 is a compact car, it does not feature a high-powered engine. The 1.5-liter naturally aspirated engine in the Baojun 330 delivers 109 horsepower and a maximum torque of 135 Nm. This engine reaches its peak power at 6,000 rpm and its maximum torque at 4,500 rpm. More details are as follows: 1. This engine incorporates multi-point fuel injection technology and utilizes an aluminum alloy cylinder head with a cast iron cylinder block. It is paired with a 5-speed manual transmission, as all Baojun 330 models are manual. 2. The Baojun 330 features a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear. It is common for compact cars like the Baojun 330 to use a torsion beam suspension at the rear due to limited space for more complex and space-consuming independent suspensions. Additionally, the torsion beam suspension is cost-effective, helping to reduce the overall manufacturing cost of the vehicle.
15
2
Share

Where is the starter circuit breaker located in the Mercedes-Benz Sprinter?

The relay of the Mercedes-Benz Sprinter is located under the hood, at the upper left corner of the engine. Introduction to relays: A relay is an electrical control device that causes a predetermined step change in the controlled quantity in the electrical output circuit when the change in the input quantity (excitation quantity) reaches the specified requirements. It has an interactive relationship between the control system (also known as the input circuit) and the controlled system (also known as the output circuit). It is commonly used in automated control circuits and essentially functions as an "automatic switch" that uses a small current to control the operation of a large current. Therefore, it plays roles such as automatic regulation, safety protection, and circuit conversion in the circuit. Classification of relays: Relays are generally divided into electromagnetic relays and solid-state relays. An electromagnetic relay is an electrical relay that operates using the attraction force generated between the electromagnet core and the armature by the current in the input circuit. A solid-state relay is a type of relay where electronic components perform their functions without mechanical moving parts, and the input and output are isolated. Time relay: When the input signal is applied or removed, the output part requires a delay or a time limit to reach the specified time before closing or opening the controlled circuit relay.
5
5
Share

How to align the timing chain on a Kia Forte?

Forte timing chain alignment procedure is as follows: 1. Align the timing mark of the crankshaft sprocket with the upper surface of the cylinder head, then install the chain tensioner arm. 2. Rotate the crankshaft to align the vehicle transmission and flywheel. 3. Rotate the camshaft. Align the timing gear mark on the camshaft with the base of the valve chamber. 4. Align the rectangular projection on the drive end of the engine oil pump shaft with the crankshaft direction. 5. Insert the distributor assembly into the mounting hole and align the distributor rotor with the mark on the housing. 6. Install the distributor cover, then connect the spark plug wires and various internal components. 7. Install the timing belt and start the engine for testing. More about the Forte: The Forte is a compact car produced by Dongfeng Yueda Kia. In terms of power, the Forte is equipped with a 1.6-liter naturally aspirated engine with a maximum horsepower of 123. In terms of transmission, the Forte offers a 6-speed manual or a 6-speed automatic transmission. For suspension, the front suspension is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension.
18
0
Share

What Kind of Rear Spoiler Does Not Require Registration?

Rear spoilers that do not exceed the height or width of the vehicle body do not require registration and can pass vehicle inspections smoothly. This regulation is primarily based on safety considerations. A car rear spoiler, professionally referred to as a rear wing or spoiler, is part of the vehicle's aerodynamic kit. Below is an introduction to car rear spoilers: 1. A car rear spoiler, professionally referred to as a rear wing or spoiler, is part of the vehicle's aerodynamic kit. Its main function is to reduce lift at the rear of the vehicle. If the lift at the rear is greater than that at the front, it can lead to excessive steering, reduced rear-wheel traction, and poor high-speed stability. 2. In terms of materials, there are currently three main types of rear spoilers on the market: First, OEM-produced fiberglass spoilers, which are relatively more in line with the vehicle's body lines. Second, aluminum alloy spoilers, which appear more exaggerated but offer good airflow guidance and are moderately priced, though they are slightly heavier than spoilers made of other materials. The best material for spoilers is carbon fiber, which perfectly combines high rigidity and durability and is widely used in F1 racing cars. Carbon fiber spoilers are not only lightweight but also the most aesthetically pleasing type of spoiler.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.