How many vehicles can a driver's license be bound to for point deduction?

Which brand does the DS5 belong to?

DS5 is the Citroën DS5, a model launched by the French automaker Peugeot Citroën in 2011. Here is more relevant information: 1. Citroën DS5 configuration: The gasoline engine of the Citroën DS5 is mainly a 1.6T turbocharged engine, including two tuning versions, with maximum power outputs of 160 horsepower and 200 horsepower respectively. Its exterior: The design resembles that of a concept car, with a stylish and eye-catching appearance. Interior: Dynamic and fashionable, with a reasonable layout, rich and practical configurations, and a strong sense of technology. Space: Equipped with 8-way electric adjustment for the front seats and multiple functions. Configurations: Elegance Edition, Luxury Edition, and Prestige Edition. 2. Citroën DS5 powertrain: In terms of powertrain, the Citroën DS5 may be equipped with a 1.6L THP gasoline engine and a 2.2L HDi diesel engine. Additionally, it will introduce PSA HYbrid4 technology, achieving electric four-wheel drive through a front-mounted diesel HDi engine and a rear-mounted electric motor, with a maximum power output of 147kW.

6

5

Share

What is the Appropriate Standard Tire Pressure for Cars?

The standard tire pressure is generally between 2.4-2.5 bar. If the tire pressure is too low, the contact area between the tire and the ground will increase during driving, causing the internal temperature of the tire to rise and potentially damaging the tire. Conversely, if the tire pressure is too high, encountering bumps or poor road conditions can easily lead to the risk of a blowout. The standard tire pressure (referred to as standard tire pressure) can usually be found in these locations: 1. Vehicle user manual; 2. Label near the driver's side door (near the B-pillar); 3. Drawer next to the driver's seat; 4. Fuel tank cap door; 5. For passenger cars, the tire pressure information is often located near the door pillar or on the fuel tank cover, or on the side of the passenger door. Different vehicle models have varying weights and tire specifications. The front and rear tires usually require different pressures.

19

0

Share

Can a pre-selected license plate number be canceled?

Pre-selected license plate numbers can be canceled. Here is relevant information about pre-selecting license plates: 1. New vehicle license plate selection methods: Selection at the vehicle management office, self-composed selection, and online selection. When selecting at the vehicle management office, you can get the license plate on the same day. Self-composed selection or online selection requires waiting for 15 working days to obtain the license plate. 2. Temporary license plate validity period: Before obtaining the metal license plate, the vehicle management office will issue a paper-printed temporary license plate. Temporary plates have a limited validity period, typically 7 or 15 days. When using temporary plates, one should be affixed to the upper right corner of the front windshield and another to the upper left corner of the rear windshield inside the vehicle.

14

5

Share

What Causes the Engine Check Light to Illuminate?

Introduction to the reasons for the engine check light illuminating: 1. Sensor issues. The sensors mentioned here include coolant temperature, crankshaft position, air flow, intake air temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or experience signal interruption, the car's ECU cannot accurately obtain engine data, which will cause the engine check light to illuminate. 2. Maintenance issues. Poor engine maintenance is the most common cause of the engine check light illuminating. 3. Fuel and oil quality issues. This includes both fuel and engine oil. The fuel added to a car usually has a specific grade, and engine oil can be semi-synthetic or fully synthetic. Manufacturers generally recommend which grade of fuel and type of oil to use. If the owner does not follow these recommendations, prolonged use can lead to engine wear. 4. Poor combustion of the air-fuel mixture. Faults in the engine's spark plugs, ignition coils, fuel pump, or clogged fuel lines can all cause poor combustion of the air-fuel mixture. Poor combustion leads to engine carbon buildup or knocking issues, which are eventually detected by the oxygen sensors in the exhaust system. After being reported to the ECU, the engine check light will illuminate as a warning. 5. Air intake issues. The engine requires air intake during combustion, and the air filter plays a crucial role in this process. If the car's air filter is dirty and not cleaned regularly, it can affect the air intake. Prolonged neglect can lead to clogging, and severe cases will cause the engine check light to illuminate. 6. False alarms. Driving on bumpy roads, tampering with certain engine connectors, or temporary signal interruptions in the ECU can all cause the engine check light to illuminate. However, these issues can usually be resolved by visiting a 4S shop to clear the fault codes with a diagnostic tool.

11

2

Share

Reasons for the Discontinuation of Borgward Vehicles?

The key reason for the discontinuation of Borgward vehicles lies in their excessively high fuel consumption, which fails to meet the requirements of the Ministry of Industry and Information Technology's "Passenger Car Fuel Consumption Limits". Although the discontinuation of Borgward was a misunderstanding, the shortcomings in Borgward's powertrain technology cannot be ignored. For example, the 2.0T engine in the Borgward BX7 reused the 2.0T engine from Foton Sauvana, indicating Borgward's lack of technical accumulation in this core component. Moreover, this engine was noted to be highly similar in structure to Volkswagen's EA888 engine. Borgward's 1.4T engine was also accused of being a reverse-engineered version of the EA211, with identical parameters. Borgward faces internal and external challenges such as a lack of core technology and declining sales, making its survival increasingly difficult.

4

5

Share

Should You Shift Gear or Release the Handbrake First in a Car?

Start the car and shift into gear first. Shift into gear first. Here are the relevant details about starting a car: 1. Benefits of shifting into gear before releasing the handbrake: Prevents the car from rolling forward or backward, thus avoiding dangerous situations. 2. Techniques for starting the car: Always start in first gear, no matter the situation. Master the clutch by practicing lifting it until you feel the engagement point, which is when the car is about to move (also known as the half-clutch state), then hold it steady. Slowly release the clutch, and the car will start smoothly. Practice coordinating the clutch and throttle. When lifting the clutch to the half-clutch state, hold it steady, and while slowly releasing the clutch, gently press the throttle to achieve a smooth start. Master the technique of coordinating the clutch and throttle—release the clutch slowly while pressing the throttle gently. The throttle should not be too heavy or too light to ensure smooth clutch engagement.

17

3

Share

How many vehicles can a driver's license be bound to for point deduction?

Which brand does the DS5 belong to?

What is the Appropriate Standard Tire Pressure for Cars?

Can a pre-selected license plate number be canceled?

What Causes the Engine Check Light to Illuminate?

Reasons for the Discontinuation of Borgward Vehicles?

Should You Shift Gear or Release the Handbrake First in a Car?

What is the body length of the Audi A3?

Can Engines Be Dismantled from Scrap Car Markets?

Does a Manual Transmission Car Still Have Brakes After Stalling?

Can the Beetle's Rear Seat Accommodate Passengers?