How many variants does the Wuling Zhiguang Liye have?

What Causes the Noise When Pressing the Clutch Pedal?

There are several reasons why the clutch makes noise when pressed: 1. Broken drive plate steel sheet: A sharp noise is heard when the clutch is about to engage. The sound disappears when the pedal is pressed and reappears when the pedal is released. This is caused by a broken drive plate steel sheet or exposed rivet heads scraping against the pressure plate or flywheel, requiring major repairs. 2. Lack of lubrication in the release bearing: When there is insufficient lubricating oil, the balls inside squeeze against each other, producing abnormal noise, or the balls may become deformed. 3. Stagnation in the linkage system, deformation of the drive plate, or oil contamination on the friction disc: Symptoms include the clutch pedal being lifted at low speed, the vehicle jerking when starting, and a "bang" sound being emitted.

15

4

Share

Why does the car roll back when starting on a slope?

Rolling back when starting on a slope is due to improper use of the brakes, which are not pressed firmly enough. The backward movement occurs because the clutch is not released sufficiently, resulting in insufficient power from the car. If the brake is released at this point, the car will roll back. Key points to prevent rolling back when starting on a slope: 1. Slow: Release the clutch and brake slowly to avoid stalling. 2. Vibration: Release the clutch until the car starts to vibrate, then slowly release the brake to prevent rolling back. 3. Correct operation: Slowly lift the clutch to the semi-engaged position; keep the left foot steady on the clutch pedal without moving, and gradually release the brake pedal with the right foot. When the car vibrates and shows a tendency to move forward, quickly release the handbrake, and the car will start moving. After traveling a short distance, slowly release the clutch pedal to complete the slope start.

6

1

Share

What is the 0-100km/h acceleration time for the 10th-generation Accord 260?

The 0-100km/h acceleration time for the 10th-generation Accord 260 is 7.6 seconds. The 0-100km/h acceleration time refers to the time taken to accelerate from 0 to 100km/h, which is the most intuitive reflection of a car's power. Related introductions are as follows: Accord's powertrain technology: The 2.4L i-VTEC engine, based on Honda's unique VTEC technology, adopts direct injection, Atkinson cycle, and VTC (Variable Valve Timing Control), and introduces an EGR (Exhaust Gas Recirculation) system, improving fuel economy by 13% and increasing maximum torque by 8%. The CVT transmission uses a high-strength belt to achieve a wide gear ratio, providing efficient power delivery. Through the "G-Design Shift" control technology, it quickly responds to the driver's demands. The relationship between vehicle mileage and fuel consumption: The fuel consumption published by manufacturers is generally the constant-speed fuel consumption at 90km/h, but this does not mean that this speed is the most fuel-efficient. In fact, the faster the car goes, the greater the wind resistance, and the higher the corresponding fuel consumption. During high-speed driving, often more than half of the fuel consumption is used to overcome resistance.

6

5

Share

Can a Temporary License Plate Be Used in Other Cities?

New cars with temporary license plates can travel to other cities, but whether they are allowed depends on the color of the plate. Below is relevant information about temporary license plates for out-of-city travel: 1. Sky-blue temporary license plates: These plates are for temporary use within the administrative jurisdiction and are only valid for vehicles driving within the city limits, so they cannot be used in other cities. 2. Brown-yellow temporary license plates: These plates allow vehicles to travel across regions. If you need to drive to another city, you must apply for this type of plate. 3. Expired temporary license plates: Additionally, if you use an expired temporary license plate and are caught by traffic police, your vehicle may be impounded, and you may face a fine of 200 yuan and a deduction of 3 points from your driving record.

3

5

Share

What is the tire model of the Mazda6?

The tire specification for the Mazda6 is 205/55R16. In 205/55R16, the first number 205 represents the tire width of 205MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, and 16 represents the rim diameter of 16 inches. The middle letter "R" stands for radial tire. The tire brand for the Mazda6 is Hankook K407 tread pattern, and the spare tire specification is non-full size. The tire specification for the Mazda6 is 205/55R16. The first number 205 represents the tire width of 205MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, and 16 represents the rim diameter of 16 inches. The middle letters or symbols have special meanings: "X" stands for high-pressure tire; "R", "Z" stand for radial tire; "—" stands for low-pressure tire. The Mazda6 is the latest product introduced by Mazda in the 21st century, a mid-to-high-end sedan launched at the 2001 Tokyo Motor Show. In addition to the model, tires are also marked with the following common data: Tire cord material: represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification compatible with the tire for practical use, such as "Standard rim 5.00F". If you want to replace the tire yourself, you can follow the steps below: Take out the spare tire and jack, place the jack under the frame of the tire to be replaced, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car, the jack should be positioned under the vehicle, check and ensure the jack is at a right angle to the ground; Remove the hub cover, loosen the nuts counterclockwise, do not completely loosen the nuts, just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts turn instead of the tire; Turn the nuts counterclockwise until they come off, repeat this step for all lug nuts, completely remove the nuts; Place the new tire on the hub, carefully align the tire rim with the wheel bolts, install the lug nuts, tighten the nuts by hand until all nuts are concealed, at this point the tire replacement is complete. In addition to the model, tires are also marked with the following common data: Tire cord material: represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification compatible with the tire for practical use, such as "Standard rim 5.00F".

20

5

Share

Can emulsified engine oil still be used?

Emulsified engine oil cannot continue to be used. If emulsified oil is persistently used, it will damage the engine. If engine oil shows signs of emulsification, it is recommended to identify the cause of the emulsification, repair it, and then replace with fresh oil. Emulsified engine oil produces a white milky substance. Causes of engine oil emulsification: 1. Water entering the oil: Water from the heat exchanger infiltrates the oil (due to cracked water chambers); water from the combustion chamber enters the oil. 2. Gasoline mixing into the oil: Gasoline contamination in the oil may result from excessive fuel injection or insufficient air intake, leading to unburned gasoline entering the oil pan; it could also be due to poor sealing of the cylinder liner compression rings, allowing gasoline to seep into the crankcase during injection, resulting in gasoline mixing with the oil.

10

3

Share

How many variants does the Wuling Zhiguang Liye have?

What Causes the Noise When Pressing the Clutch Pedal?

Why does the car roll back when starting on a slope?

What is the 0-100km/h acceleration time for the 10th-generation Accord 260?

Can a Temporary License Plate Be Used in Other Cities?

What is the tire model of the Mazda6?

Can emulsified engine oil still be used?

What is the voltage when five batteries are fully charged?

What are the symptoms of a faulty ignition coil in a Jetta?

What is a Test Drive Vehicle?

Can people without a driver's license buy a car?