How many types of Yamaha 100cc scooters are there?

2 Answers
StNorah
07/28/25 8:05pm
Jianshe Yamaha scooters are produced in Zhuzhou, including models such as the Jog, Cygnus, Fino, Majesty, and Xmax. Among these, the Jog is a smaller 100cc scooter, while the Cygnus is available in both 100cc and 125cc variants. The Cygnus, Fino, Majesty, and Xmax are more suitable for male riders. Additionally, Linhai Yamaha produces a 100cc scooter called the Fuxi, which is similar in size to the Jog. Below is some relevant information: Avoid storing the battery in a discharged state: When storing the battery, it is strictly prohibited to leave it in a discharged state. A discharged state refers to the battery not being recharged promptly after use. Storing the battery in a discharged state can easily lead to sulfation, where lead sulfate crystals form on the electrode plates, blocking ion channels and resulting in insufficient charging and reduced battery capacity. The longer the battery remains idle in a discharged state, the more severe the damage. Accurately determine charging time: During use, the charging time should be accurately determined based on actual conditions, taking into account factors such as frequency of use and mileage. Also, pay attention to the capacity specifications provided by the battery manufacturer, as well as the performance of the accompanying charger and charging current parameters, to determine the appropriate charging frequency.
Was this review help?
1
0
Share
VonKyle
08/12/25 12:54am
When I first encountered the Yamaha 100 scooter, I was truly amazed by its diversity. As a daily commuter, it isn't just a single model but comes in several variants, like the older Jog series—affordable and easy to maintain—or the newer Ray, which has a more modern design with LED lights and a digital dashboard. These models are sold in different regions, some tailored for urban short trips, others better suited for suburban roads. I've ridden the Cygnus GT version, which offers decent acceleration and low fuel consumption, around 2 liters per 100 km. Overall, the categories include entry-level, sporty, and custom editions, with subtle differences based on the year. I'd recommend checking detailed specs online and comparing performance before making a purchase.
Was this review help?
3
4
Share
Expand All
More Forum Discussions

What Causes 5th Gear to Pop Out in a Manual Transmission?

Manual transmission 5th gear popping out is caused by damage to the 5th gear synchronizer. Below are detailed explanations about manual transmissions: Definition: A manual transmission vehicle uses a manually operated mechanical gearbox to adjust speed. This means the driver must manually shift the gear lever to change gear meshing positions inside the transmission, altering gear ratios to achieve speed changes. Advantages and Disadvantages: The advantages of manual transmissions include simple structure, reliable performance, low manufacturing and maintenance costs, high transmission efficiency, and theoretically better fuel economy. Additionally, being purely mechanically controlled, they offer faster shift response and more directly reflect the driver's intentions, providing greater driving pleasure. The disadvantages are more complicated operation and noticeable jerking during gear changes. Working Principle: In a manual transmission vehicle, the power input shaft is connected to the clutch. Power transferred from the clutch is directly transmitted through the input shaft to the gear set, thereby achieving gear shifting.
6
1
Share

How long does it take to get the result of dynamic weighing overload?

For vehicle overload, the dynamic weighing scale can detect it in just over ten seconds. In contrast, the previous manual inspection process, from stopping the vehicle to checking documents and then proceeding to the station for testing, would take at least 2 to 3 minutes to complete. The non-stop overload detection system consists of a dynamic weighing scale, vehicle capture system, video monitoring system, LED display screen, and information processing system. Relevant information about overload is as follows: 1. Introduction: Overload refers to the actual loading of a transportation vehicle exceeding the maximum allowable limit. Freight overload usually means that the goods transported by a motor vehicle exceed the total load weight of the freight vehicle. 2. Hazards: Due to overload, the vehicle's control ability is reduced, which can easily lead to traffic accidents. At the same time, overload damages the road and affects the vehicle's speed. Some overloaded vehicles often can only crawl at a speed of 10 to 20 kilometers per hour, greatly affecting the efficiency of road transportation and reducing the transportation efficiency of vehicles.
6
3
Share

What are the uses of waste tires?

Here are the uses of old tires: Tire retreading: Hand over the replaced tires to reliable professional organizations for purchase to prevent them from being used by unscrupulous businesses, which could endanger driving safety. These organizations that can recycle old tires often have relatively complete mechanisms. If it is determined that the old tires meet the scope of retreaded tires, they will undergo a special repair process and eventually be transformed into retreaded tires. Turning waste into treasure: If they do not meet the standards, the old tires are usually processed for oil refining, which can not only extract beneficial products but also produce rubber powder and rubber particles from the waste tires after treatment. These are widely used in modified asphalt, waterproof materials, rubber floor tiles, or rubber running tracks, among other uses. Of course, these discarded old tires can also be cleaned and directly made into tables, chairs, and benches, which can not only save costs but also allow for designing styles according to personal preferences, making it an environmentally friendly method.
14
1
Share

What is the reason for the squeaking sound when turning on the heater?

The reason for the squeaking sound when turning on the heater is the presence of foreign objects inside the blower. Select the appropriate air conditioning fan speed setting: During normal vehicle operation, to prevent excessive frosting of the evaporator, which can affect the air conditioning system's performance, the air supply speed and temperature control should not be set to the lowest setting for extended periods. When the vehicle speed is below 25 km/h, the fan speed switch should be set to the low-speed setting to avoid insufficient power generation and inadequate cooling. Duration of single air conditioning use: If the interior temperature has reached a comfortable level, the air conditioning can be turned off or turned on again after a while. Prolonged use of the air conditioning can cause excessive pressure on the condenser, leading to wear and tear on the cooling system. Therefore, the duration of each air conditioning use should not be too long.
20
4
Share

Will the Car Stall Immediately After Driving Through a Heavy Rainstorm?

Driving through a heavy rainstorm does not necessarily cause the car to stall immediately, but it is advisable to avoid driving electric vehicles in such conditions. Electrical Circuit Failure: If the car stalls due to low voltage during driving, you can check the ignition and starter switches, as well as the fuse box. Component Failure: This usually occurs when there are issues with the ignition coil, capacitor, or electronic ignition module. The symptoms include the car starting initially but stalling after a short while, followed by repeated stalling upon restarting. Fuel System Failure: Common causes include a damaged fuel pump, ruptured fuel lines, or a clogged carburetor fuel inlet, all of which can lead to stalling. Ignition System: If the engine overheats and causes problems with the anti-explosion system, stalling may occur.
16
5
Share

Is it necessary to replace all four fuel injectors if one is broken?

It is not necessary to replace all four fuel injectors if one is broken; only the damaged fuel injector needs to be replaced. Below is some relevant information about fuel injectors: 1. Fuel injector cleaning cycle: Generally, it is recommended to clean them every 20,000 to 30,000 kilometers. For vehicles in good condition and using high-quality fuel, this interval can be extended to 40,000 to 60,000 kilometers. 2. Hazards of not cleaning fuel injectors for a long time: If fuel injectors are not cleaned for an extended period, clogging can become more severe, leading to poor fuel injection, improper spray angle and atomization, and causing the engine to perform poorly at idle, during acceleration, or under full load. This results in decreased engine power and increased fuel consumption.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.