How many types of Mercedes-Benz car keys are there?

Where to Stick Car Door Anti-Collision Strips?

Car door anti-collision strips are usually attached to the side of the door, primarily to prevent minor scratches and damage to the parts. Generally, installing anti-collision strips does not affect the annual vehicle inspection. However, for the sake of overall coordination, the color of the strips on the front and rear doors should be consistent. If the edges of the door anti-collision strips peel off, you can use adhesive remover to clean them—spray it on, let it sit for a while, and then wipe off the glue. Benefits of anti-collision strips: 1. They have a certain elasticity and strong anti-collision performance; 2. They are stylish and practical, and not prone to fading; 3. They are easy to use, can be bent at any angle, and are convenient to stick.

8

2

Share

How to Check if the Transmission Fluid is Sufficient?

Methods to check if the transmission fluid is sufficient: 1. Directly check via the transmission fluid dipstick; the normal level should be between the maximum and minimum marks. 2. There is an inspection screw on the side of the transmission. Remove this screw, and if transmission fluid flows out, it indicates sufficient fluid. If no fluid flows out, it means more fluid needs to be added. Transmission fluid is an oil product that keeps the gear system clean, ensuring the transmission operates properly and extends the lifespan of the transmission components. Most transmission fluids are compatible with automatic transmissions on the market. In fact, each automatic transmission design has different technical requirements. Even the same model of transmission configured in different vehicles may vary in torque, weight, speed, and structure. Therefore, the original manufacturer specifies its own dedicated transmission fluid.

17

3

Share

How to Control the Clutch Well in Subject 2?

Methods for controlling the clutch well in Subject 2: Mainly involves making slight adjustments around the semi-engagement point. Press the pedal with the ball of your foot, pushing it all the way down, with the heel either suspended or not bearing weight, and the leg slightly lifted. The entire foot's pressure point is on the ball of the foot. When shifting gears and pressing the clutch, generally press it down quickly all the way, and when releasing the clutch, the first half can be slightly faster, but the latter half must be lifted slowly. The clutch is located within the flywheel housing between the engine and the transmission, with the clutch assembly fixed to the rear plane of the flywheel by screws. The output shaft of the clutch is the input shaft of the transmission. During driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and transmission, thereby cutting off or transmitting the power input from the engine to the transmission.

9

1

Share

What Causes a Car to Pull to One Side?

The reasons for a car pulling to one side: 1. Uneven tire pressure: If the tire pressure on the left and right sides is unequal, it will cause uneven wear between the drive wheels and the ground. Different friction levels can directly lead to the car pulling to one side. The solution is to check the tire pressure at a car maintenance and repair shop. 2. Suspension system failure: A faulty suspension system can also cause the car to pull to one side. This is a more serious issue, and once detected, it is advisable to perform a thorough inspection and repair. 3. Inconsistent wheelbase on both sides: After prolonged use, vehicles are bound to encounter bumps and collisions. If the overall vehicle body is deformed, the wheelbase on both sides differs significantly and is not promptly corrected, or if the correction does not meet technical requirements, the car will tend to pull towards the side with the shorter wheelbase when driving.

3

4

Share

How to Turn on the Fog Lights in a Focus?

Ford Focus fog light button is located on the headlight switch. Turn the headlight switch to the right to the second position, then pull up one notch for the front fog lights and another notch for the rear fog lights. Some vehicles have the fog light control on the light lever, which is activated by rotation. When the button marked with the fog light symbol in the middle is turned to the ON position, the front fog lights are activated. Then, turning the button downward to the rear fog light position activates both front and rear fog lights simultaneously. The Ford Focus is a car launched by Changan Ford, with body dimensions of 4404mm in length, 1810mm in width, and 1454mm in height, and a wheelbase of 2705mm.

8

2

Share

What is the first maintenance mileage for the Lynk & Co 03?

The first maintenance for the Lynk & Co 03 is at 10,000 kilometers. There are two indicators for a car's maintenance cycle: one is the time indicator, and the other is the mileage indicator, whichever comes first. Owners should try to perform the maintenance before reaching the first maintenance cycle to avoid affecting the normal use of the car. The first maintenance of the car mainly involves changing the engine oil and oil filter. One important thing to note is that when changing the engine oil, the oil filter must also be replaced at the same time. If the oil filter is not replaced, the new engine oil will be contaminated by the old oil filter. The Lynk & Co 03 is the first sedan product of the Lynk & Co brand, with body dimensions of 4639mm in length, 1840mm in width, and 1460mm in height, and a wheelbase of 2730mm.

18

2

Share

How many types of Mercedes-Benz car keys are there?

Where to Stick Car Door Anti-Collision Strips?

How to Check if the Transmission Fluid is Sufficient?

How to Control the Clutch Well in Subject 2?

What Causes a Car to Pull to One Side?

How to Turn on the Fog Lights in a Focus?

What is the first maintenance mileage for the Lynk & Co 03?

What kind of engine oil should be used for the maintenance of the new Volkswagen Santana?

What should be paid attention to during the break-in period of an automatic transmission new car?

What does parking heating mean?

What kind of engine oil should be used for Jetta sedans?