How many types of Mercedes-AMG are there?

How many kilometers can 24 liters of oil run?

24 liters of oil can generally run about 300 kilometers. The categories of car engine oil are as follows: 1. Mineral oil: Mineral oil base is refined from crude oil, which means after extracting gas, gasoline, diesel, kerosene, and heavy oil from crude oil, the mineral oil base is then refined, leaving asphalt as the residue. The mineral oil base is transparent with a slight amber hue, similar to the color of salad oil. Typically, mineral oil is very low-cost, but since the mineral oil base is more prone to oxidation, even though modern mineral oils contain various imported additives, their service life is still about six months. 2. Full synthetic oil: This type of oil contains only PAO or ester synthetic compounds, all of which are artificially made through chemical processes. It was first used in the aviation industry and later in racing cars, and is now very common in passenger cars. The advantages of full synthetic oil include high cleanliness, strong fluidity, excellent cooling capability, and outstanding oxidation resistance. 3. Semi-synthetic oil: Semi-synthetic oil refers to the addition of a portion of mineral oil to synthetic oil, with a ratio of mineral oil to synthetic oil of 4:6. Its characteristics include the advantages of full synthetic oil while being cheaper than full synthetic oil. The performance of semi-synthetic oil is inferior to full synthetic oil in all aspects, but it has a price advantage and a slightly shorter replacement cycle than full synthetic oil.

10

3

Share

Can car glass scratches be repaired?

There are two types of car glass scratches: repairable scratches and non-repairable scratches. The details are as follows: 1. Small and shallow scratches can be removed by grinding and polishing: Scratches on the glass can be removed by grinding and polishing, but this is only applicable to small and shallow scratches, preferably not in the main line of sight, as grinding causes wear to the glass, and large areas may affect visibility. 2. Large or long cracks require direct glass replacement: For dents on the glass, specialized glass repair agents can be used for filling and repair. For those with large or long cracks, repair is not recommended as the effect is limited, and direct replacement of the glass is advised.

15

4

Share

What is the refrigerant charging amount for Wuling Hongguang?

The refrigerant charging amount for Wuling Hongguang is approximately 800 grams. It can also be determined by the dosage specified in the vehicle's user manual or adjusted according to the pressure symptoms indicated by the air conditioning pressure gauge. Precautions when adding refrigerant: When charging refrigerant, it is necessary to evacuate the system; wear protective goggles and rubber gloves to prevent refrigerant from causing damage to exposed body parts; do not perform welding on pipelines before the refrigerant is completely discharged to avoid the generation of toxic gases when the refrigerant is heated; refrigerant charging should be performed in a well-ventilated area to prevent operators from inhaling excessive fumes and experiencing unexpected symptoms; do not use refrigerants of different specifications when charging, and refrigerants should not be mixed. Refrigerant, commonly known as "freon," is a working fluid used in refrigeration and air conditioning systems to transfer heat energy and achieve cooling effects. Depending on the working method, it is classified as primary refrigerant or secondary refrigerant; based on material properties, it is divided into natural refrigerant and synthetic refrigerant.

4

Share

When to Step on the Accelerator?

According to the driving situation, stepping on the accelerator should be handled specifically. The details are as follows: 1. Starting the car: Starting the car is to get the car from a stationary state to a normal operating speed. When you hear or feel the engine speed drop, gently press the accelerator while continuing to slowly release the clutch. 2. Reversing: Reversing is the gear where the car engine outputs the maximum torque. If the idle speed feels too slow when reversing, you can press the accelerator slightly. 3. Starting on a slope: To overcome the downward reaction force of the car, when you hear or feel the engine speed drop, gently press the accelerator, release the clutch, and slowly release the handbrake at the same time.

9

2

Share

Does stalling before entering the test item in Subject 2 result in point deduction?

An engine stall caused by improper operation will result in a 10-point deduction. Other common situations that lead to point deductions include: Vehicle crossing the line, failing to reverse into the garage, stopping midway, not following the prescribed route or sequence, or exceeding the time limit will result in a 100-point deduction. For slope fixed-point parking, if the right side of the vehicle is more than 30 cm away from the roadside line after parking, 10 points will be deducted; if more than 50 cm, 100 points will be deducted. Running over or brushing against the line will result in a 100-point deduction. If the front bumper is not aligned with the pole line and the deviation is within 50 cm, 10 points will be deducted; if the deviation exceeds 50 cm, 100 points will be deducted. Subject 2 has a full score of 100 points, with evaluation criteria set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The test is considered passed if the following conditions are met: ① For applicants of large buses, tractors, city buses, medium-sized buses, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required.

13

5

Share

What are the differences between DCT, CVT, and AT?

What are the differences between DCT, CVT, and AT? 1. Structure: The three have different structures. 2. Transmission method: CVT uses a steel belt for transmission, DCT has two automatically controlled clutches inside the gearbox for control, while AT relies entirely on hydraulic torque conversion, i.e., hydraulic oil, to achieve the connection of front and rear power. 3. Impact on torque: Because the AT gearbox has a hydraulic torque converter, which is a hydraulic buffer speed regulation device, it can easily achieve smooth starts and smooth creeping. On the other hand, DCT achieves gear shifting and torque conversion through the dual-clutch method, making the process response in upshifting speed more thorough. When paired with an engine that has more precise torque output, it has a smaller tolerance for torque errors.

3

0

Share

How many types of Mercedes-AMG are there?

How many kilometers can 24 liters of oil run?

Can car glass scratches be repaired?

What is the refrigerant charging amount for Wuling Hongguang?

When to Step on the Accelerator?

Does stalling before entering the test item in Subject 2 result in point deduction?

What are the differences between DCT, CVT, and AT?

Can an Audi A7 with RS7 body kit pass the annual inspection?

Where is the battery located for jump-starting an Audi Q5?

What to Do When the Car Side Skirt is Dented?

What to Do When Driver's License Review Expires?