How many types of Isuzu 4jB1 are there?

How much engine oil for a 1.5L engine?

1.5L engines require 3.5 to 4.5 liters of engine oil. Engine oil, also known as motor lubricant, consists of base oil and additives. The base oil is the primary component of lubricants, determining their fundamental properties, while additives compensate for and enhance the performance shortcomings of the base oil, imparting new characteristics. These mainly include anti-wear additives, detergents, dispersants, and multi-grade oil viscosity index improvers. The primary functions of engine oil are to reduce friction and wear on moving parts, remove sludge and varnish from the engine, neutralize acids produced by fuel combustion and lubricant oxidation, improve piston ring sealing, and cool the engine by dissipating heat from moving components.

13

4

Share

Can You Still Drive with Emulsified Engine Oil?

You should not drive with emulsified engine oil, as continued use can damage the engine. If the engine oil shows signs of emulsification, it is recommended to identify the cause, fix the issue, and then replace the oil. Emulsified engine oil indicates the presence of water in the engine, which can be related to factors such as the engine itself, weather conditions, or the operating environment. Precautions to prevent engine oil emulsification: 1. Always warm up the engine before driving and use the appropriate oil for your vehicle; 2. Regularly inspect areas like the air filter, especially in northern or humid regions; 3. The engine's breather tube should not be connected to the air filter but instead vented to the atmosphere. However, the opening where the air filter was connected must be sealed. The breather tube should be fixed downward to prevent blockage and avoid rainwater ingress.

12

0

Share

What are the symptoms of a damaged engine head gasket?

Engine head gasket damage manifests in the following ways: 1. Cylinder head air leakage: A damaged head gasket compromises the seal between the cylinder head and engine block, resulting in air leakage during vehicle operation; 2. Oil and coolant leakage: The damaged gasket may cause coolant and engine oil to leak, potentially mixing these fluids and causing adverse engine reactions; 3. Gas intrusion into oil/water passages: When high-pressure gases enter oil or coolant passages, this can impair lubrication of internal engine components, potentially leading to elevated engine temperatures, severe component wear, and compromised engine performance; 4. Reduced cylinder pressure: The engine operates abnormally and may exhibit noticeable vibration at idle.

20

4

Share

What is the difference between National III and National IV vehicles?

The difference between National III and National IV vehicles lies in their emission standards: The National III emission standard requires HC emissions to be below 0.2g per kilometer, CO emissions below 2.3g per kilometer, and NOx emissions below 0.15g per kilometer. The National IV emission standard requires HC emissions to be below 0.1g per kilometer, CO emissions below 1.0g per kilometer, and NOx emissions below 0.08g per kilometer. The main pollutants emitted from vehicle exhaust include hydrocarbons, nitrogen oxides, carbon monoxide, and particulate matter, which are primarily discharged through the vehicle's exhaust pipe. Due to the increasing environmental harm caused by vehicle emissions, countries and regions worldwide have successively established limits on vehicle exhaust emissions.

18

2

Share

How to Use Cruise Control in Honda CR-V?

Honda CR-V cruise control method: 1. While driving, press the MAIN button on the left side of the steering wheel to activate cruise standby mode; 2. When the speed exceeds 40 km/h, press the middle button to activate the cruise function; 3. Press the RES (+) button to increase speed; 4. Press the SET (-) button to decrease speed; 5. Press the button on the left to adjust the following distance; 6. Press the lane-keeping button to enable the lane-keeping function, allowing the vehicle to automatically stay in the center of the lane. The Honda CR-V is a classic urban SUV model produced by Dongfeng Honda, featuring a stylish and dynamic exterior with smooth lines that balance roundness and sportiness. It is equipped with recalibrated 2.0L and 2.4L engines.

14

3

Share

How to Adjust the Height of Car Seats?

Methods for adjusting car seat height: 1. Electric seats are adjusted via buttons; 2. Manual seats are adjusted using a lever. Car seats must meet two key requirements: ease of adjustment and comfort. This means drivers can adjust the seat to the optimal position for the best visibility and ease of operating the steering wheel, pedals, and gear shift. Seat height should be adjusted according to the driver's height. The ideal seat height should meet these conditions: Firstly, there should be at least a fist's distance between the head and the car roof, while maintaining clear visibility for the driver. If the seat is set too high, the head may hit the roof when the vehicle bumps, affecting driving.

20

1

Share

How many types of Isuzu 4jB1 are there?

How much engine oil for a 1.5L engine?

Can You Still Drive with Emulsified Engine Oil?

What are the symptoms of a damaged engine head gasket?

What is the difference between National III and National IV vehicles?

How to Use Cruise Control in Honda CR-V?

How to Adjust the Height of Car Seats?

Is the X-Trail's electric fan a high-speed fan?

What to Do When a Small White Spot Appears on the Windshield?

Differences Between Toyota Prado 2700 and 4000?

Where is the air conditioning filter located in the Ford Transit?