How many turbos does the Mercedes G63 AMG engine have?

1 Answers
LeMadelyn
07/29/25 3:02pm
The Mercedes G63 AMG engine has 2 turbos. The vehicle is equipped with a 4.0-liter twin-turbocharged V8 engine, delivering a maximum horsepower of 585 hp and a peak torque of 850 Nm. The maximum torque is achieved between 2,500 and 3,500 rpm, while the maximum power is reached at 6,000 rpm. It features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. The Mercedes G63 AMG is based on the redesigned Mercedes G-Class, with dimensions of 4,763 mm in length, 1,855 mm in width, and 1,938 mm in height, and a wheelbase of 2,850 mm. The vehicle's front grille adopts a dual-slat design with the three-pointed star emblem, and four large-diameter exhaust pipes extend from the side skirts near the rear wheels on both sides of the body.
Was this review help?
8
1
Share
More Forum Discussions

How to set up one-touch window lift for Audi A4L?

Audi A4L setting up one-touch window lift method is: 1. First raise the window glass to the highest position; 2. Then continue to hold the window switch for five to ten seconds, after which you can operate the window with one-touch up and down. One-touch window lift refers to a car window system that allows the glass to be fully raised or lowered with a single press of a button. The Audi A4L is a mid-size sedan under FAW-Volkswagen Audi, with dimensions of 4858mm in length, 1847mm in width, and 1439mm in height, a wheelbase of 2908mm, a body style of 4-door, 5-seater sedan, a 7-speed dual-clutch transmission, and a top speed of 220 km/h.
17
0
Share

What is the operation method of dynamic balancing?

The operation method of dynamic balancing is: 1. Inflate the tire to the appropriate pressure, remove the lead weights on the rim, clean out the stones in the tire tread grooves, and clean the rim; 2. Install the tire with the mounting surface facing inward on the balancing shaft, select the appropriate cone, and secure the tire with the locking device; 3. Turn on the power of the balancing machine, pull out the ruler to measure the distance between the rim and the balancing machine, the width of the rim, and the diameter of the rim, and input the measured data in sequence; 4. Press the start button, the balancing machine begins to rotate the tire for measurement, be careful not to stand near the tire to avoid danger; 5. The balancing machine automatically stops after obtaining the data; 6. Rotate the tire until all position lights on one side of the balancing machine are fully lit (different models may display differently), then hammer the corresponding weight of lead blocks at the highest point of the rim on this side (the 12 o'clock position), and do the same on the other side; 7. Repeat the steps after step 4 until the balancing machine displays 0; 8. The dynamic balancing is completed, remove the tire.
15
1
Share

What is the relationship between Qoros Auto and Chery?

Qoros Auto is an independently operated brand under the Chery Group, dedicated to designing and manufacturing Chinese automotive products that meet or even exceed international standards. The Qoros 5 is an SUV under the Qoros brand, equipped with a 1.6T engine to meet the needs of business reception. In terms of body dimensions, it measures 4600mm in length, 1869mm in width, and 1676mm in height, with a wheelbase of 2710mm. The Qoros 5 series is equipped with a GPS navigation system, central LCD screen, Bluetooth system, and other configurations. The high-end models also feature an 11-speaker BOSE audio system.
20
2
Share

Are ordinary cars front-wheel drive or rear-wheel drive?

Ordinary cars are generally front-wheel drive. Front-wheel drive means the two front wheels pull the rear wheels to move, while rear-wheel drive means the rear tires push the car forward through the transmission of the wheelbase. There is no significant difference during normal driving, but in rainy or snowy weather, the advantages of front-wheel drive become apparent. Front-wheel drive vehicles are more stable, making both passengers and drivers feel very safe without any skidding. In contrast, rear-wheel drive vehicles are completely different—they are prone to skidding and harder to control when turning, often leading to side slipping. Whether front-wheel or rear-wheel drive, the car is supported by both the front and rear wheels. In front-wheel drive cars, the front wheels are responsible for both driving and steering, which can lead to insufficient grip during sharp turns, making it difficult to complete the turn—this is called "understeer."
11
2
Share

Which country does Jeep belong to?

Jeep is American. Jeep is a brand, not a type of vehicle. The first Jeep was produced during World War II to meet the military needs of the U.S. Army. In China, the Jeep brand is exclusively used by Beijing Jeep Corporation Limited, meaning that no other off-road vehicles, such as those produced by Mitsubishi, Toyota, or other companies, can be called Jeep. The Jeep Cherokee is a compact four-wheel-drive off-road passenger vehicle by American standards, with dimensions of 4822mm in length, 1943mm in width, 1764mm in height, and a wheelbase of 2915mm.
9
2
Share

Is 10L/100km Fuel Consumption Normal for City Driving?

Is 10L/100km Fuel Consumption Normal for City Driving? 58 Auto 10L/100km fuel consumption is normal for city driving. Factors such as driving habits, road conditions, the weight of items placed in the car, whether the air conditioning is on, and whether the vehicle is in the break-in period can all affect fuel consumption. Here are 5 tips to help reduce fuel consumption while driving: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly flooring the accelerator, as this can multiply fuel consumption. Light acceleration, light braking, early braking: While driving, gently press the accelerator to avoid sudden increases in engine RPM and prevent the car from shaking during operation, making it more fuel-efficient. By anticipating road conditions and accelerating or braking slowly and evenly, fuel economy can be improved by up to 20%. Maintain proper tire pressure: Keep tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (approximately 0.2 in metric units relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular vehicle maintenance or inspections: Regular oil changes can reduce carbon buildup (carbon deposits can cause ignition issues, sluggish acceleration, increased fuel consumption, and in severe cases, even cylinder misfires). Regularly check and replace the air filter if dirty, and clean or replace the fuel injectors, spark plugs, and throttle body as per the recommended mileage. Close windows while driving. Driving with windows open increases wind resistance, which in turn increases the resistance the car faces, requiring more power and thus increasing fuel consumption.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.