How many tons of cargo can the Great Wall Pickup Fengjun 5 carry?

1 Answers
McGarrett
07/30/25 8:53am
Fengjun 5 pickup truck has a full load capacity of approximately 2.5 to 2.7 tons, but it is recommended to keep the cargo load below 1.5 tons for better safety. Here are some details about the Fengjun 5 pickup: 1. The Fengjun 5 pickup is designed with a bold and imposing appearance, featuring full-bodied car lines and finely crafted interiors, providing drivers with an excellent experience. It is a benchmark brand in China's pickup truck industry. 2. Fengjun vehicles, also known as Fengjun pickups, are models launched by Great Wall Motors Co., Ltd. The design of Fengjun pickups draws inspiration from international pickup styles. They are equipped with Mitsubishi 4G69 fuel injection engines and the most advanced diesel engines in current diesel pickup technology, achieving energy-saving and environmentally friendly driving effects.
Was this review help?
9
1
Share
More Forum Discussions

What engine does the Bin Yue use?

Bin Yue uses a 1.5-liter three-cylinder turbocharged engine. This engine has a maximum power of 177 horsepower and a maximum torque of 255 Nm. The engine can output maximum power at 5500 rpm and maximum torque between 1500 and 4000 rpm. This engine is equipped with direct injection technology and uses an aluminum alloy cylinder head. Extended content: 1. Bin Yue uses a ternary lithium battery. Ternary lithium batteries have relatively high energy density and are relatively light in weight, making them more suitable for pure electric family cars and plug-in hybrid family cars. 2. The front suspension of Bin Yue New Energy uses a MacPherson independent suspension, and the rear suspension uses a torsion beam non-independent suspension.
6
1
Share

What is the total weight of the Jetour X90?

This vehicle has a curb weight of approximately 1,550 kg. The Jetour X90 is equipped with two engine options: 1. A 1.5-liter turbocharged engine. This engine delivers a maximum power of 115 kW and peak torque of 230 N·m. It features DVVT technology and multi-point fuel injection, with an aluminum cylinder head and cast iron cylinder block. This engine is paired with a 6-speed dual-clutch transmission. 2. A 1.6-liter turbocharged engine. This engine produces a maximum power of 145 kW and peak torque of 290 N·m. It incorporates direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is mated to a 7-speed dual-clutch transmission.
4
5
Share

Is the Audi Q5L a 4-wheel drive?

The Audi Q5L is a 4-wheel drive vehicle, equipped with an on-demand four-wheel drive system that utilizes a multi-plate clutch central differential. In terms of powertrain, this model comes with two engine options: a low-power version of the 2.0-liter turbocharged engine and a high-power version of the 2.0-liter turbocharged engine. The low-power 2.0-liter turbocharged engine delivers a maximum power of 140 kW and a maximum torque of 320 Nm, paired with a 7-speed dual-clutch transmission. The high-power 2.0-liter turbocharged engine produces a maximum power of 185 kW and a maximum torque of 370 Nm, also matched with a 7-speed dual-clutch transmission.
7
5
Share

What grade of oil should be used for the Benelli 250?

Benelli 250 uses engine oil with a viscosity of 10W-40, either mineral oil or semi-synthetic oil is acceptable. Introduction to motorcycle oil: Motorcycle oil is the abbreviation for motorcycle engine lubricating oil. Motorcycle lubricants typically include motorcycle engine oil (referred to as motorcycle oil), motorcycle gear oil, motorcycle shock absorber oil, etc. Motorcycle oil specifications: The "W" stands for Winter, and the presence of "W" indicates that the oil is suitable for all seasons. The number following the "W" represents the viscosity of the oil, with higher numbers indicating thicker oil. The number preceding the "W" indicates the oil's cold-start performance, with lower numbers indicating better cold-start performance.
4
1
Share

What are the symptoms of motorcycle engine bearing seizure?

Motorcycle engine bearing seizure phenomenon may be caused by severe lack of lubrication oil during engine operation. Causes of motorcycle engine bearing seizure: Insufficient initial running-in of the engine, high-speed driving induced bearing seizure. For newly assembled engines, the seemingly smooth inner surface of the cylinder and the outer peripheral surfaces of the piston and piston rings are actually composed of countless micron-level uneven protrusions. Before the engine can truly operate freely, initial running-in of the mating surfaces must be performed to remove the protruding peaks, making the surfaces smooth and evenly stressed, preventing mutual biting during sliding, thus ensuring smooth operation. Repair methods for motorcycle engine bearing seizure: Inspect the engine and piston assembly for wear and piston assembly wear faults.
20
4
Share

How to Shift from Third Gear to Second Gear?

Third gear is a transitional gear, with speeds ranging between 30-35 km/h, while second gear operates between 20-25 km/h. To shift from third to second gear, you need to reduce your speed to around 25 km/h. Once the speed is appropriate, press the clutch pedal all the way down with your left foot. Shift the gear lever from third gear to neutral. Then move the gear lever all the way to the left. Shift the gear lever from the far left position into second gear, ensuring the shift is fully engaged. Release the clutch and the gear lever, then continue driving in second gear.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.