···
Log in / Register

How many tons can the Changan Kuayue Wang X5 carry?

4 Answers
JasperRose
08/29/25 8:16am

Changan Kuayue Wang X5 can carry about 4 tons. Here are the specific details of the Kuayue Wang X5: 1. Vehicle Positioning: The Kuayue Wang X5 is a light truck launched by Changan Automobile, equipped with a 3.5-ton rear axle and a series of configurations designed to enhance load-bearing performance. 2. Power: This vehicle is powered by a 1.5L engine, which delivers a maximum power of 112 horsepower and a maximum torque of 143 Nm. The engine complies with the National Five vehicle emission standards. 3. Transmission System: The vehicle is paired with a Qingshan MR515 five-speed transmission.

Was this review help?
15
5
Share
CourtneyRose
09/11/25 5:44am

I've been driving the Changan Kuayue Wang X5 for over three years for cargo hauling. In practical experience, it can generally carry around 1.5 tons. If you opt for the dual rear wheel version, the load capacity is even stronger, reaching up to 1.8 tons. Overloading is absolutely not recommended. Last time I overloaded by half a ton, the rear axle spring got bent midway, costing me hundreds in repairs, not to mention the fine of several hundred yuan and penalty points if caught by traffic police. The truck's chassis design is quite stable, making it handy for transporting construction materials or small furniture, but after all, it's a light truck—don't treat it like a heavy-duty one. For daily use, I recommend carrying 1 to 1.3 tons of cargo; the truck will be more durable and fuel-efficient, and driving will be much easier. Remember to adjust the load based on road conditions—reduce weight on bumpy roads, as this is crucial for the vehicle's longevity. My neighbor had to undergo major repairs soon after because of overloading.

Was this review help?
1
3
Share
Expand All
RhettLynn
10/25/25 6:33am

I have some knowledge about vehicles. The payload capacity of the Changan Kuayue Wang X5 depends on the model configuration. The standard single rear-wheel version can carry about 1.2 tons, while the dual rear-wheel version is more robustly designed, capable of handling 1.5 tons or even more. This is thanks to its rear axle structure and tire support. During actual testing with heavy loads, it felt quite balanced. However, don't just focus on the numbers; the vehicle's weight and cargo distribution also affect real-world performance. I once tried loading it with mixed goods, and an uneven center of gravity caused the whole vehicle to shake. When purchasing, it's better to opt for the dual rear-wheel version, which has stronger load-bearing capacity and requires less maintenance. During regular use, maintain proper tire pressure and avoid full loads on wet roads to prevent slipping risks. Overall, it's suitable for small to medium freight, being both economical and practical.

Was this review help?
16
5
Share
Expand All
CarmenDella
12/08/25 6:57am

I use this vehicle for small business cargo transportation. The manual states the rated load capacity is around 1 ton, depending on the specific model. Don't overload it greedily, as it can easily cause damage to vehicle components, such as spring or chassis deformation, and the repair costs aren't cheap. In practical use, carrying 1 ton of cargo in the city is quite stable, but if the roads are uneven, reducing the load to 800 kg is safer. There's a nameplate on the vehicle indicating the maximum load capacity, which I always check to avoid violations. Tire maintenance is also crucial, as excessive wear affects traction. In short, follow the official guidelines, don't add weight recklessly, and ensure smooth driving.

Was this review help?
17
4
Share
Expand All
More Forum Discussions

Is Four-Wheel Drive Necessary for Family Cars?

Whether a family car needs four-wheel drive (4WD) depends primarily on the budget and the driving environment. If the budget is sufficient, 4WD is a valuable feature—you can never have too many functions, and 4WD is like the icing on the cake. Next, consider the driving conditions. In southern regions with relatively warm climates and rare icy roads, the necessity of 4WD diminishes significantly. Of course, rain can still cause slipping, but driving slowly can mitigate this (there’s a solution). In northeastern areas with low winter temperatures and heavy snowfall, 4WD may be worth considering, though local snow-clearing capabilities should also be factored in. Classic Full-Time 4WD: True full-time 4WD systems designed for racing require mechanical limited-slip differentials on both the front and rear axles, typically paired with a Torsen center differential or proprietary technologies like DCCD. Full-time 4WD maintains a constant four-wheel drive state, leading to high fuel consumption. This is why fewer vehicles today use mechanical center differentials as power-coupling devices for full-time 4WD. The Significance of 4WD for Sedans: Early sedans were often equipped with full-time 4WD, but due to fuel efficiency concerns, many have transitioned to on-demand 4WD. Comparatively, sedans have lower ground clearance and a lower center of gravity than SUVs (though this is relative, as center of gravity is a systemic consideration).
1
3
Share

What are the differences in wheel sizes?

Here are the relevant introductions about the differences in wheel sizes: 1. Sensitivity: Large-sized wheels have higher handling sensitivity. Large-sized wheels are generally paired with low-profile tires, giving the entire wheel higher lateral stiffness. This means the wheel deforms less under high lateral forces such as high-speed cornering, thereby improving handling sensitivity. 2. Handling stability: Large-sized wheels offer stronger handling stability. Larger wheels exhibit less tilt during vehicle turns, enhancing control. 3. Comfort: Smaller wheels provide better comfort. For the same car model, the smaller the wheel, the higher the tire sidewall, which effectively suppresses vehicle vibrations and tire noise.
4
5
Share

Where is the headlight switch on a Tesla?

Tesla's headlight switch is located on the lighting control assembly to the left of the steering wheel. Rotating the knob turns the low beams on and off, while flipping the lever controls the high beams. Below is a detailed introduction about Tesla: 1. Overview: Tesla Motors generally refers to Tesla. Tesla is an American electric vehicle and clean energy company that manufactures and sells electric cars, solar panels, and energy storage systems. Its headquarters is located in Palo Alto. 2. Other Information: Tesla's first vehicle product was the Roadster, launched in 2008, which was a two-door sports car. The second product was the Model S, introduced in 2012, a four-door all-electric luxury sedan. The third vehicle product was the Model X, a luxury all-electric SUV.
4
5
Share

What Causes Abnormal Noise in Audi Engines?

Audi engine abnormal noise is caused by water pump noise, timing noise, or alternator noise. When abnormal engine noise is detected during driving, the vehicle should be stopped immediately for diagnosis and troubleshooting. If the issue cannot be determined independently, it is advisable to seek professional inspection and repair at a nearby auto repair shop based on the situation. Water Pump Noise: Water pump noise is mainly caused by the pump wheel bearing of the water pump. Prolonged operation, coupled with erosion from coolant and scale buildup, leads to severe wear of the water pump blade bearing. If this issue is not resolved promptly, it can result in complete water pump failure, where the pump operates but fails to circulate coolant, thereby affecting engine cooling. Timing Noise: Timing noise mostly occurs in the timing belt tensioner and timing chain limiter. The primary cause is deformation of the tensioner and wear on the limiter due to prolonged compression and friction. Mild cases may cause engine vibration, unstable idling, easy stalling, and difficulty in engine acceleration. In severe cases, timing misalignment can lead to valve deformation due to piston contact, necessitating an engine overhaul and replacement of the cylinder head. Alternator Noise: Alternator noise is typically caused by loose alternator bearings, lack of lubrication, or slack in the alternator belt. Loose bearings can easily damage the alternator, while a slack belt may cause slippage, insufficient drive, and affect the alternator's normal power supply.
12
2
Share

What is the difference between PU and TPU materials for car wraps?

The differences between PU and TPU materials for car wraps are as follows: 1. PU: The material used is polyurethane. Compared to PVC material, its advantage is increased toughness; the disadvantages are poor weather resistance, weak resistance to alkaline corrosion, gradual yellowing that cannot be repaired, and poor anti-fouling performance. 2. TPU: The material used is thermoplastic polyurethane. Its advantages include strong impact resistance, puncture resistance, and scratch resistance, stable thermal repair function, strong water repellency, excellent corrosion and stain resistance, high-temperature resistance, as well as low-temperature resistance, oil resistance, chemical resistance, etc. This material is recyclable and belongs to environmentally friendly materials. The disadvantage is complex processing and higher price.
15
3
Share

What causes the squeaking sound when pressing the clutch on a Wuling Hongguang?

Wuling Hongguang may produce abnormal noise when pressing the clutch due to worn clutch plates or broken clutch pressure plate springs, which requires replacement of the clutch plates or clutch pressure plate springs. The following is an introduction to the car clutch: 1. Introduction: The car clutch is located in the flywheel housing between the engine and the transmission, and the clutch assembly is fixed to the rear plane of the flywheel with screws. The output shaft of the clutch is the input shaft of the transmission. 2. Function: During driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and the transmission, thereby cutting off or transmitting the power input from the engine to the transmission.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.