How many tire brands does Michelin own?

1 Answers
DeAdriel
07/29/25 5:17pm
Michelin owns the following tire brands: Michelin Tires: The PAX system invented by Michelin in 1998 enhances the balance between driving safety, comfort, and handling, significantly improving tire performance and fuel efficiency. Even in the event of tire deflation or a blowout, the wheel with the hub remains intact, allowing the vehicle to continue driving up to 200 kilometers at a speed of 80 km/h, ensuring the safety of both the driver and passengers. Winter Tires: Michelin's X-ICE winter tires are specifically designed for harsh winter conditions, including snow, ice, and slippery roads. Their advanced technology greatly enhances stability and control on complex winter road surfaces, significantly improving safety and allowing drivers to confidently navigate icy conditions. Radial and Bias Tires: Michelin promotes the radialization of large vehicle tires in China. Compared to bias tires, radial tires offer several advantages, including longer wear life, lower puncture rates, better fuel efficiency, larger contact area, improved handling, lower operating temperatures, enhanced safety and comfort, and better machine protection. Performance Tires: The Michelin Pilot Sport 3 is a high-performance sports tire developed for various types of vehicles, including urban cars, sports cars, and high-powered sedans. Additionally, its oversized 18- to 19-inch products can be optional for non-sports models. Upon its release, the Pilot Sport 3 demonstrated strong appeal among automakers, with many renowned car brands planning to equip their most representative sports models with this tire, such as the new Audi A5 and the new Mercedes-Benz E63 AMG.
Was this review help?
6
1
Share
More Forum Discussions

What engine is equipped in the Geely King Kong?

Geely King Kong is equipped with a 1.5L naturally aspirated engine, with a maximum horsepower of 102ps, a maximum power of 75kw, and a maximum torque of 141nm, paired with a 5-speed manual and automatic transmission. The dimensions of the Geely King Kong are: length 4342mm, width 1692mm, height 1435mm, wheelbase 2502mm, minimum ground clearance 158mm, fuel tank capacity 45L, and curb weight 1103kg. The front suspension of the Geely King Kong is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension. The Geely King Kong is equipped with 185/60R15 front tires and 185/60R15 rear tires.
11
0
Share

What Causes the Steering Wheel Noise in the New Santana?

New Santana steering wheel noise is caused by issues such as a faulty airbag clock spring, lack of oil in the shock absorber's plane bearing, loose stabilizer bar bushings, or dirty power steering fluid. The details are as follows: Faulty Airbag Clock Spring: If the noise comes from inside the steering wheel, it is mostly due to a dry airbag clock spring. Remove the steering wheel's airbag clock spring and apply some grease. Check if the noise persists. If it does, promptly replace the airbag clock spring, as it indicates damage. Lack of Oil in the Shock Absorber's Plane Bearing: When turning the steering wheel, if the noise comes from outside the vehicle, it is likely due to insufficient oil in the shock absorber's plane bearing. Open the hood and listen to see if the noise originates from the shock absorber's top mount. This will confirm if the noise is from the plane bearing. If it lacks oil, apply some grease. If the noise continues after greasing, replacement is necessary. Loose Stabilizer Bar Bushings: If the noise is not from the shock absorber's plane bearing, check if the stabilizer bar bushings are loose or damaged. Loose or damaged stabilizer bar bushings can cause noise not only when turning the steering wheel but also when driving on uneven roads. Loose bushings can be fixed by adding shims, but damaged ones must be replaced. Dirty Power Steering Fluid: If the power steering fluid is too dirty, it increases the pressure in the power steering system, causing a buzzing noise from the power steering pump. Promptly replace the power steering fluid in such cases.
16
3
Share

What car has a logo featuring a cross with a snake beside it?

The logo featuring a cross with a snake beside it belongs to Alfa Romeo. Taking the 2020 Alfa Romeo Giulia as an example, its body dimensions are: length 4643mm, width 1860mm, height 1438mm, with a wheelbase of 2820mm and a fuel tank capacity of 58 liters. The 2020 Alfa Romeo Giulia features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 280PS, a maximum power of 206kW, and a maximum torque of 400Nm, paired with an 8-speed automatic transmission.
1
5
Share

How to Check the Production Date of a Seat Belt?

Seat belt production date can be checked by: pulling out the entire seat belt, where the label at the very bottom carries the production date. The function of a seat belt is: to restrain the driver and passengers in their seats during emergency braking in case of an accident, preventing them from being thrown forward and protecting them from secondary impact injuries. Precautions for using seat belts: 1. Before using the seat belt, check if any parts are aged, deteriorated, or damaged; 2. The lap belt should be fastened above the maximum hip circumference, close to the pelvic bones, keeping the waist tightly secured to prevent the body from sliding out of the belt or causing waist injuries.
4
3
Share

What does Dongfeng Honda Civic 220 mean?

Dongfeng Honda Civic 220 indicates that the engine has a maximum torque of 220Nm. Its body dimensions are: length 4517mm, width 1799mm, height 1434mm, with a wheelbase of 2700mm, minimum ground clearance of 104mm, fuel tank capacity of 47 liters, and a curb weight of 1343kg. The Dongfeng Honda Civic 220 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5T turbocharged engine producing a maximum horsepower of 177PS and a maximum power output of 130kW, paired with a continuously variable transmission (CVT).
17
3
Share

What is the tutorial for removing the rear bumper of the Sylphy?

Sylphy rear bumper removal tutorial is: 1. Remove the fixing screws on the mudguard; 2. Open the trunk and remove the fixing screws near the taillights; 3. Remove the clips along the edge of the bumper. The Sylphy has a body length, width, and height of 4631mm, 1760mm, and 1503mm respectively, with a wheelbase of 2700mm, a minimum ground clearance of 166mm, and a fuel tank capacity of 50L. The Sylphy features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, producing a maximum horsepower of 122PS, a maximum power of 90kW, and a maximum torque of 155Nm, paired with a 5-speed manual/automatic transmission.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.