How many times will you be photographed if you keep driving in the emergency lane?

2 Answers
McTanner
07/29/25 12:12am
Driving in the emergency lane continuously will result in continuous monitoring. You will be fined every time you are caught, with a penalty of 6 demerit points per violation. Principle of emergency lane monitoring: Generally, there are cameras installed beside the emergency lane, with a monitoring range of approximately 150 meters. The basis for capturing violations is whether the vehicle crosses the solid line. When a vehicle crosses the solid line of the right lane, the camera will capture the violation. Emergency lane cameras typically capture the front of the vehicle. Permissible situations for using the emergency lane: In case of vehicle malfunctions such as a flat tire or engine failure, the vehicle can move to the emergency lane. At the same time, the hazard warning lights must be activated, and a warning sign should be placed 150 meters behind the vehicle before calling the police. Failure to follow these procedures may still result in a fine even if the vehicle is genuinely malfunctioning.
Was this review help?
19
3
Share
StKaden
08/12/25 4:28am
When I first started driving, I was curious and always felt it was a waste not to use the emergency lane, especially when stuck in traffic and wanting to take a shortcut. Once, I actually tried it, running from the highway entrance to the exit. It ended badly—cameras are mostly installed on bridge piers or accident-prone spots, with one every short distance. I was caught three times, fined over a thousand yuan in total, and had four points deducted from my license. Later, I realized this lane is reserved for ambulances and fire trucks in emergencies. If ordinary traffic blocks it during congestion and real emergencies arise, delayed response could lead to more severe consequences. Now, I always queue up properly—it’s worry-free and safer. Remember, highway cameras are densely distributed, with several points in each area. If you drive the entire way in the emergency lane, you’ll likely be caught multiple times, receiving endless fines.
Was this review help?
12
5
Share
Expand All
More Forum Discussions

Is it allowed to reverse at a highway ramp entrance?

Reversing on highway ramps is strictly prohibited, and if caught, it will result in a 12-point deduction from the driver's license. 1. Relevant penalties: Reversing on a highway ramp is equivalent to driving in the wrong direction on a highway, leading to a 12-point deduction. The driver will then need to retake the driving test. However, not all ramps have surveillance cameras, so drivers can check for violations at the traffic bureau within two weeks. 2. Correct approach: Reversing on a highway ramp is extremely dangerous, especially at the junction where the ramp meets the main highway. It can easily cause traffic accidents, endangering both the driver's and others' lives. Therefore, the safest option is to exit the highway and then re-enter by paying the toll again.
10
5
Share

How Many Liters of Transmission Fluid Are Needed for a Change?

Depending on the vehicle model and the method of replacement, the amount of transmission fluid required varies. Some may need around 6-7 liters, while others require 8-10 liters. The exact amount should be determined based on the actual situation. Reference material: There is a method that requires over 12 liters of transmission fluid for replacement. The reason is that this method uses a circulation machine for fluid exchange, where the vehicle is in a running state during the process. The fluid circulates internally, carrying away contaminants from the transmission, thus requiring more fluid. However, the advantage is that the circulation machine method ensures a cleaner and more thorough replacement. Apart from consuming more transmission fluid, this method is also more time-consuming, taking about an hour, and is more expensive.
2
0
Share

What does the double dashed line on the highway mean?

Double white dashed lines serve different purposes depending on their location. When painted at intersections, they function as yield lines, indicating that drivers should slow down and yield. When marked along road sections, they indicate reversible lanes where the direction of traffic may change over time. Lane dividing lines are white dashed lines used to separate traffic flows moving in the same direction, placed between lanes traveling the same way. Vehicles are permitted to cross these lines for lane changes when safe to do so. When there are two or more lanes in the same direction of travel, lane dividing lines must be marked. On highways, Class I roads, Class II roads (when consisting of two lanes), and urban expressways, the dimensions for lane dividing lines are 600cm lines with 900cm gaps, or 400cm lines with 600cm gaps. For other roads, the standard is 200cm lines with 400cm gaps.
5
0
Share

Why is the CRV lacking power when reversing?

CRV lacking power when reversing may be due to slippage in the automatic transmission. Check the fluid level and quality of the automatic transmission fluid. The level can be checked using the dipstick. If the fluid level is too high or too low, you will need to add or drain fluid. If the slippage stops after this adjustment, no further repairs may be necessary. If the fluid level is normal, inspect the quality of the fluid. If the automatic transmission fluid appears brownish-black or has a burnt smell, it indicates that the clutch inside the transmission is burnt and requires professional repair. Below are common transmission faults: 1. Oil leakage: Oil seeping from the transmission housing or oil pan can be caused by aging seals leading to poor sealing or manufacturing defects resulting in pinholes in the housing. 2. Engine stalling when shifting into gear: Stalling when shifting into D or R may be caused by a faulty lock-up solenoid valve or a stuck lock-up control valve. 3. Locked gear: Incorrect input or output signals from the transmission, or issues with components or their wiring, can cause this. Sometimes, communication problems between the transmission computer and other system computers can also be the cause. 4. No response when shifting into gear: The vehicle does not move after shifting into D or R and releasing the brake. This is often due to damage to the input shaft or reverse clutch, or failure of the D/R brake. 5. Abnormal noises: Unusual sounds from the transmission area while driving are usually caused by worn parts or improper installation of the transmission.
12
5
Share

Why does it feel like the brakes don't work after replacing ceramic brake pads?

The reason why the brakes feel weak after replacing brake pads: The surface of newly replaced brake pads is not flat, and some small protrusions on the surface will first come into contact with the brake disc, resulting in reduced contact area and lower friction. After installing new brake pads, this condition will improve after a break-in period. Related information: Brake pads are a crucial component of the braking system and also a wear-prone part. Many people notice a decrease in braking power immediately after replacing brake pads, but this is normal. The surface of new brake pads is not perfectly smooth, and they need time to conform to the brake disc surface. After some driving, the braking performance will return to normal.
5
5
Share

Is the Tesla with Brake Failure Made in China?

Is the Tesla with Brake Failure Made in China? Taking the 2021 Tesla Model X as an example, the details are as follows: Dimensions: It belongs to the mid-to-large SUV category, with body dimensions of 5037mm in length, 2070mm in width, and 1684mm in height, a wheelbase of 2965mm, and a curb weight of 2352kg. Suspension and Power: The 2021 Tesla Model X features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a front permanent magnet synchronous motor and a rear AC asynchronous motor, with a total motor power of 493kW, paired with a 1-speed fixed gear ratio transmission.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.