How many times should the brake be tapped during Subject 3 test?

1 Answers
DelMarcus
07/30/25 1:15am
Subject 3 requires tapping the brake 7 times. Here are the specific details: Straight through intersections: Before entering an intersection during straight-line driving, you need to tap the brake to slow down. The speed should not exceed 30km/h when passing through the intersection. Pedestrian crossings: During the road test, when you see a pedestrian crossing ahead, you must reduce your speed. If there are pedestrians on the crossing, you must stop the vehicle and yield to them. Remember, do not stop the vehicle on the pedestrian crossing. Bus stops: During the road test, if you hear the voice prompt to pass a bus stop, you must immediately tap the brake. Passing schools: In areas near schools, the speed must be kept below 30km/h, and you must also use the brake appropriately. U-turns: When making a U-turn, you need to reduce your speed. This ensures the vehicle does not lose control due to excessive speed and inertia during the turn.
Was this review help?
17
2
Share
More Forum Discussions

How Many Horsepower Does a 1.5T Engine Have?

1.5t engine is 193 horsepower. Horsepower is a commonly used unit for measuring power in engineering technology. An engine is a machine that can convert other forms of energy into mechanical energy. According to its working principle, it is divided into: 1. External combustion engine: Fuel burns outside the engine; 2. Internal combustion engine: Fuel burns inside the engine; 3. Gas turbine: Uses the high pressure of gas to rotate the blades of the gas turbine to output power; 4. Jet engine: An engine that directly generates reaction thrust by the high-speed airflow ejected from the nozzle. The working principle of the engine is: The thermal energy of gasoline or diesel expands the gas after combustion in a sealed cylinder, pushing the piston to do work, thereby converting it into mechanical energy.
1
1
Share

Where is the cabin air filter located in the Jeep Cherokee?

The cabin air filter in the Jeep Cherokee is located beneath the glove compartment. Its functions include: 1. Providing fresh air; 2. Absorbing harmful substances; 3. Filtering solid particles. Taking the 2021 Commemorative Edition Jeep Cherokee as an example, its body dimensions are: length 4669mm, width 1865mm, height 1691mm, with a wheelbase of 2707mm and a fuel tank capacity of 60 liters. The 2021 Commemorative Edition Jeep Cherokee features a front MacPherson strut independent suspension and a rear multi-link independent suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 265PS, maximum power of 195kW, and maximum torque of 400Nm.
16
4
Share

How often should the brake pads of an Audi A6 be replaced?

Audi A6 brake pads should be replaced every 30,000 to 50,000 kilometers. The replacement method is as follows: 1. Remove the wheels of the brake; 2. Use a wrench to remove the brake caliper bolts and take out the brake pads; 3. Clean the debris from the brake caliper with a cloth; 4. Install the new brake pads onto the brake caliper; 5. Tighten the guide bolts and check the braking effect. The function of brake pads is to provide stable, sufficient, and controllable braking force, with good hydraulic transmission and heat dissipation capabilities to avoid hydraulic failure and brake fade caused by high temperatures. Taking the 2021 Audi A6 Luxury Dynamic model as an example, its body dimensions are: length 5050mm, width 1886mm, height 1475mm, wheelbase 3024mm, fuel tank capacity 73 liters, and trunk capacity 430 liters.
2
0
Share

How many hours does it take to change a tire?

Changing a tire takes about one hour. The replacement steps are: 1. Lift the vehicle with a jack; 2. Unscrew the tire bolts; 3. Rotate to detach the tire; 4. Replace the tire and tighten the bolts; 5. Check the tire pressure. Tire maintenance methods: 1. Regularly check tire pressure; 2. Pay attention to tire wear indicators; 3. Prioritize wheel rotation timing. The functions of tires are: 1. Support the vehicle's weight and bear the car's load; 2. Transmit traction and braking torque, ensuring wheel-to-road adhesion; 3. Reduce and absorb impact forces; 4. Ensure driving safety, handling stability, and comfort.
13
1
Share

What are the differences between the Mercedes-Benz C260 and C180?

The differences between the Mercedes-Benz C180 and C260 include variations in power, exterior design, and dimensions. Below are the expanded details: Power Differences: The Mercedes-Benz C180 is equipped with a 1.6T inline 4-cylinder turbocharged engine, delivering a maximum power of 115KW. The Mercedes-Benz C260, on the other hand, features a 1.5T inline 4-cylinder turbocharged engine with a maximum power output of 135KW. Exterior Differences: The Mercedes-Benz C180 comes with a single sunroof, while the C260, except for the sport version, is equipped with a panoramic sunroof across all other models. Dimension Differences: The exterior dimensions of the Mercedes-Benz C180 are 4783mm in length, 1810mm in width, and 1442mm in height. The C260 measures 4784mm in length, 1810mm in width, and 1457mm in height.
13
3
Share

What Causes the Airbag Light to Stay On?

The reasons why the airbag light stays on are: 1. Circuit issues; 2. Loose connectors; 3. Sensor failure; 4. Instrument self-check. The airbag system is a passive safety protection system that, when used in conjunction with seat belts, provides effective collision protection for occupants. In the event of a car collision, the airbag can reduce head injury rates by 25% and facial injury rates by 80%. Precautions for using airbags include: 1. Use airbags together with seat belts; 2. Maintain an appropriate distance from the airbag when seated; 3. Do not place objects in front of, above, or near the airbag; 4. Avoid high temperatures, and the components of the airbag device should be properly stored; 5. Do not modify the airbag system or its surrounding layout without authorization.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.