How many times does a 15-year-old vehicle need to be inspected annually under the 2020 regulations?

1 Answers
AdelineAnn
07/29/25 1:35pm
2020 regulations stipulate that vehicles over 15 years old require biannual inspections. According to Article 16 of the revised Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China (October 2017): 1. Operational passenger vehicles must undergo annual inspections within the first 5 years, and semi-annual inspections thereafter; 2. Trucks and large/medium-sized non-operational passenger vehicles require annual inspections within the first 10 years, switching to semi-annual inspections thereafter; 3. Small and mini non-operational passenger vehicles need biennial inspections within the first 6 years, annual inspections thereafter, and semi-annual inspections after exceeding 15 years.
Was this review help?
12
4
Share
More Forum Discussions

Is there a long-wheelbase version of the Rolls-Royce Phantom?

Rolls-Royce Phantom does have a long-wheelbase version, with a wheelbase of 3,772 millimeters, which is 220 millimeters longer than the standard-wheelbase model. In terms of body dimensions, the long-wheelbase Rolls-Royce Phantom measures 5,990 millimeters in length, 2,018 millimeters in width, and 1,656 millimeters in height. The Rolls-Royce Phantom is the flagship model of Rolls-Royce, and all variants are equipped with a 60-degree V12 twin-turbocharged engine. The heart of Rolls-Royce is a unique powertrain system, specifically designed for Rolls-Royce: a naturally aspirated 60-degree V12 engine paired with a ZF 6-speed automatic transmission.
1
5
Share

Will Running a Red Light at Night Be Captured by Cameras?

If there are cameras, they will capture the violation. Whether a motor vehicle runs a red light while turning left or going straight, it constitutes illegal behavior. According to the relevant provisions of the Road Traffic Safety Law, vehicles must obey traffic signals, including traffic lights, traffic signs, road markings, and the directions of traffic police. If both the left-turn signal and the straight signal are green, going straight from a left-turn lane violates the designated lane rules. When the left-turn signal is red, running the red light should be penalized. Here are some tips to avoid running a red light: Check the arrow light first, then the circular light: Currently, there are two types of traffic signals: arrow traffic lights and circular traffic lights. When arrow lights are present, drivers should first observe the arrow light and then the circular light to avoid running a red light. Note: When encountering a circular red light, right turns are allowed. However, if the right-turn arrow signal is red, right turns are prohibited; otherwise, it will be penalized as running a red light. Brake in time: When the red light turns on, do not let the front of the vehicle cross the stop line. If the front wheels accidentally cross the line and the rear wheels follow, the electronic camera will capture it, and it will be penalized as running a red light. If the front wheels have just crossed the stop line when the signal turns red, the vehicle must not proceed through the intersection and should wait for the green light. Check the green light countdown before proceeding: When the green light flashes, if there is a countdown, drivers can judge accordingly. If there is no countdown and the vehicle is close to the intersection with high speed, it may proceed to avoid running a red light due to untimely braking. If the speed is slow and the vehicle is far from the intersection, the driver should brake immediately to stop and avoid running the red light. Article 38 of the Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China states: When the green light is on, vehicles are allowed to proceed, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to proceed. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motor vehicle or pedestrian signals, non-motor vehicles and pedestrians should follow the motor vehicle signals. When the red light is on, right-turning vehicles may proceed if they do not obstruct the passage of other vehicles or pedestrians. Running a red light is not considered illegal under the following circumstances: Yielding to emergency vehicles: Yielding to ambulances, fire trucks, or other emergency vehicles. If a violation is captured by surveillance cameras while yielding to such vehicles, manual review will not record the act as running a red light. Even if recorded, drivers can apply for reconsideration at the traffic police department. Extreme weather: When visibility is extremely low, making it difficult even for electronic police to clearly see the traffic lights, the captured evidence may be blurry. In such cases, mistakenly running a red light will not be penalized. Emergency situations: When transporting a critically ill patient to the hospital, running multiple red lights may be unavoidable. After delivering the patient, the driver can provide proof from the hospital or the rescued person to the traffic police for verification. If confirmed, the violation records will be cleared. If possible, calling an ambulance is recommended to avoid accidents caused by running red lights. Traffic police direction: During peak hours, traffic police may temporarily direct traffic at important intersections. Drivers should follow the gestures of the traffic police. The traffic police department states that according to the Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China, when the yellow light flashes at an intersection, vehicles that have already crossed the stop line may continue to proceed. If the yellow light is already on and the driver still proceeds, it will be considered running a red light if captured.
15
1
Share

What is the normal value of engine oil consumption?

According to the Chinese national standard GB3743-84, the ratio of engine oil to fuel consumption should be less than 1%. Based on this calculation, for a car with an engine displacement of 1.6-2.0 liters and a fuel consumption of 10 liters per 100 kilometers, the engine oil consumption should be less than 1 liter per 1,000 kilometers. Factors affecting engine oil consumption include: 1. Viscosity of the engine oil: The lower the viscosity of the engine oil, the relatively worse the sealing effect, and the amount sucked into the combustion chamber will increase. 2. Driving conditions of the vehicle: High-speed driving and frequent acceleration and deceleration will increase engine oil consumption. Different working conditions result in different amounts of engine oil consumption. During the break-in period of the engine, the oil consumption is relatively high. Therefore, the engine oil consumption is generally not evaluated during the break-in period. 3. Poor fuel quality: It is easy to form carbon deposits in the piston ring groove, which will cause the piston ring to stick for a long time, and the oil ring will lose its oil scraping effect, causing the engine oil to enter the combustion chamber from the gap between the piston and the cylinder wall, forming real oil burning. After the engine has been used for a certain number of kilometers, the piston rings and cylinder walls wear out, causing the matching gap to exceed the limit, and a small part of the engine oil will also enter the combustion chamber, forming real oil burning. The valve oil seal is damaged or hardened and aged.
16
3
Share

What Type of Vehicle Can Be Driven with an E License?

Ordinary two-wheeled motorcycles. Below are the relevant introductions: 1. A1 License: Permits driving large buses, along with the vehicle types covered by A3, B1, B2, C1, C2, C3, C4, and M licenses. 2. A2 License: Permits driving tractors, along with the vehicle types covered by B1, B2, C1, C2, C3, C4, and M licenses. 3. A3 License: Permits driving city buses, along with the vehicle types covered by C1, C2, C3, and C4 licenses. 4. B1 License: Permits driving medium-sized buses, along with the vehicle types covered by C1, C2, and C3 licenses. 5. B2 License: Permits driving large trucks, along with the vehicle types covered by C1, C2, C3, C4, and M licenses. 6. C1 License: Permits driving small cars, along with the vehicle types covered by C2 licenses. 7. C2 License: Permits driving small automatic transmission cars. 8. C3 License: Permits driving low-speed small trucks. 9. C4 License: Permits driving three-wheeled cars. 10. D License: Permits driving regular (side) three-wheeled motorcycles, along with the vehicle types covered by E and F licenses. 11. E License: Permits driving two-wheeled motorcycles, along with the vehicle types covered by F licenses.
18
4
Share

How to remotely start a Haval F5?

Haval F5 remote start method: 1. First, search for Haval Smart Home in the app store, then download and install it; 2. After installation, open the software. For the first time entering the software, registration with the original car's phone number is required; 3. Enter the phone number, receive the verification code, and then click login; 4. The remote start function is in the My Car interface. Entering this interface allows remote operation of the vehicle. As the first model under the Haval F series, the Haval F5 is positioned as an entry-level compact SUV. In terms of body dimensions, the Haval F5 has a length, width, and height of 4470mm, 1857mm, and 1638mm respectively.
10
2
Share

Why Does the Car Make Strange Noises When Starting?

It may be because the belt is slipping on the generator, causing intense friction and vibration between the belt and the pulley, producing a noise at a certain frequency. Content expansion: 1. The main reasons for belt slipping are belt looseness or aging. Factors that can cause belt looseness include improper adjustment of the belt tensioner or insufficient tensioner spring force. In this case, the tension of the belt tensioner should first be adjusted. If this does not work, replace the tensioner. 2. Belt aging mainly refers to the belt gradually hardening and losing elasticity over prolonged use, reducing the friction between the belt and the pulley. In this case, the belt can only be replaced.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.