How many times can you take the test in one day for the driver's license study and score reduction program?

1 Answers
StLeilani
07/29/25 10:31pm
Here is the relevant introduction about how many times you can take the test in one day for the driver's license study and score reduction program: 1. According to regulations: Motor vehicle drivers participate in online learning of road traffic safety laws, regulations, and related knowledge organized by the traffic management departments of public security authorities. Continuous learning for five full minutes counts towards the cumulative learning time, and accumulating 30 minutes of learning within three days counts as one session. 2. After completing 30 minutes of learning, you can apply for one test: After completing 30 minutes of learning, the applicant can choose to take the test immediately or continue learning. Choosing to continue learning still only counts as one test opportunity. Only after completing one round of learning and testing can the applicant proceed to the next round of learning and testing. It is not possible to exchange accumulated learning time for additional test attempts.
Was this review help?
17
4
Share
More Forum Discussions

Why can't the ETC device be removed?

ETC device cannot be removed for the following reasons: 1. Protect the owner's fund safety: An ETC device can only be used by the bound vehicle. Only the highway toll of this vehicle will be deducted from the bound bank card through the fixed ETC device, which protects the owner's fund safety to avoid fund loss and bank card information leakage caused by ETC device loss or theft. 2. Prevent random borrowing: If the ETC device can be removed at will, many relatives and friends may want to borrow it from the owner, which will cause a lot of unnecessary trouble.
16
4
Share

What to Do When a Car Gets Dented by Hail?

Small dents caused by hail on a car can be repaired using paintless dent repair (PDR). Here are the reasons for choosing PDR: 1. Preserve the original paint: The process is purely manual physical repair, which won't cause secondary damage to the car body and preserves the original paint. 2. Save time: Using automotive dent repair technology, repairing a dent takes 30-90 minutes, overcoming the drawback of traditional bodywork and painting which takes 1-2 days. 3. Excellent repair effect: Dents repaired with automotive dent repair technology won't discolor or fade, maintaining the car's original condition.
5
1
Share

What to Do If a Car Is Not Driven for a Long Time?

If a car is not driven for a long time, the following measures should be taken: 1. Prevent the oxidation of the 'four fluids': engine oil, brake fluid, coolant, and windshield washer fluid. 2. Battery charge: If the car is left unused for more than two months, disconnect the negative terminal of the battery; only the negative terminal needs to be disconnected, and the positive terminal should remain untouched. 3. Chassis protection: Park the car on a flat surface to ensure proper tire pressure and prevent localized deformation of the tires during prolonged parking. 4. Rust prevention for the body: Address any damaged paint on the car body, even minor damage, to prevent rust from spreading.
6
2
Share

Can ETC be attached at the black dot area on the windshield?

The black dot area on the car's windshield should not be used for ETC installation, as this position may obstruct the solar panel behind it from receiving sunlight. Additionally, the chosen ETC installation location must not interfere with the driver's line of sight. Where can ETC be installed: For small vehicles such as cars and minivans, the OBU device should be installed on the upper middle part of the windshield. For large vehicles like trucks and buses, the installation position is on the lower middle part. ETC installation requirements: The height should be no less than 1.2 meters and no more than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the surface of the electronic tag and the horizontal plane). The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and a red light will briefly illuminate. The OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning properly. Clean the windshield to ensure the surface is smooth, clean, and dry. Then peel off the adhesive backing of the OBU and attach it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is properly inserted into the OBU device.
15
0
Share

What Causes Low Idle Speed in Cars?

Reasons for low idle speed in cars are as follows: 1. Spark plug carbon deposits: Carbon deposits can be cleaned to restore spark plug activity, but some spark plugs may be nearing the end of their lifespan, leading to reduced performance. 2. Clogged fuel injector or fuel line: Blockages in the fuel system, particularly in the fuel injector, can result in insufficient fuel supply pressure, poor fuel atomization, and an imbalanced air-fuel mixture, leading to incomplete combustion and related issues. 3. Faulty sensors: Malfunctioning sensors can prevent the ECU from accurately controlling the air-fuel ratio. Common examples include faulty coolant temperature sensors, oxygen sensors, and throttle position sensors.
4
3
Share

Is the Geely Icon a hybrid?

Geely Icon is a hybrid vehicle, equipped with a 48V mild hybrid system. More details about the Geely Icon are as follows: 1. The Geely Icon is powered by a 1.5-liter three-cylinder turbocharged engine, which delivers 177 horsepower and a maximum torque of 255 Nm. This engine can output maximum power at 5500 rpm and maximum torque between 1500 and 4000 rpm. 2. The engine features DVVT technology and a 48V mild hybrid system, and it uses an aluminum alloy cylinder head and block. 3. The front suspension of the Geely Icon uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.