···
Log in / Register

How Many Times Can You Take the 'Study to Reduce Points' Test in One Day?

4 Answers
McPeyton
07/29/25 9:22pm
You can take the 'Study to Reduce Points' test a maximum of two times in one day. Important Notes: You cannot participate in the 'Study to Reduce Points' program when your driver's license has no points deducted. Therefore, a single deduction on your driver's license still cannot exceed twelve points. Otherwise, if a single deduction reaches twelve points, your driver's license will be temporarily suspended, and you will need to follow the required procedures to clear the points. Two Types of 'Study to Reduce Points': You can apply for 'Study to Reduce Points' directly at the vehicle management office. This involves studying relevant traffic safety regulations online and passing an exam to earn corresponding points. It's important to note that the 'Study to Reduce Points' program cannot always be completed in one go. The regulations require learning in segments over three days, meaning the cycle to complete one 'Study to Reduce Points' session takes at least three days.
Was this review help?
2
0
Share
HavenMarie
08/15/25 8:03pm
Last time I accidentally got points deducted while driving, so I hurriedly opened the Traffic Management 12123 APP to take the points reduction test multiple times to relieve the pressure. However, I found that the system only allows one test per day. This means you can only take the test once a day, and each test requires about 20 minutes to study traffic rules, including watching videos and answering questions. There’s a limit to the points accumulation, and the one-test-per-day rule prevents people from cheating by spamming the system. This rule is quite reasonable—it encourages us not to rush for quick results but to genuinely learn safe driving knowledge instead of messing around on the phone every day. Since then, I’ve made it a habit to take the test once after dinner every day, which has helped me develop better safety awareness. The APP also allows you to accumulate points for discounts, but the core idea is to focus on each learning session to truly benefit.
Was this review help?
5
3
Share
Expand All
AlexisDella
10/17/25 3:24am
I just got my driver's license this month and already violated a rule, leaving me frowning over the penalty points. I quickly went online to check how to reduce them. Turns out, the 'Study to Reduce Points' program only allows one test per day—no retries. The app automatically reminds you of this limit, and exceeding it will result in rejection. The rule aims to balance fairness, preventing newbies like me from thinking they can endlessly retake tests to make up for mistakes. In reality, each test covers several key knowledge points, and gradual accumulation is the safer approach. I started squeezing in study sessions during my subway commute, completing the daily requirement in one go—saving time while learning. Now, I see the limit as beneficial; it helps me develop a daily study habit, avoiding last-minute cramming and potential trouble.
Was this review help?
13
3
Share
Expand All
MacMariana
11/30/25 4:06am
With over a decade of driving experience, I fully understand that the 'Study to Reduce Points' system rules allow only one test per day, with no multiple attempts permitted. From experience, each point reduction activity is completed on apps like Traffic Management 12123, featuring simple traffic regulation Q&A sessions—short in duration but limited to once daily to prevent abuse. This is based on fairness principles, with the point cap designed to encourage steady learning of safety knowledge. My advice is to plan your schedule wisely and avoid cramming all attempts into a single day.
Was this review help?
1
4
Share
Expand All
More Forum Discussions

What engine does the SWM X3 use?

SWM X3 is equipped with a 1.6L naturally aspirated engine and a 1.5T turbocharged engine. The functions of the engine are: 1. Fully burning the fuel injected into the cylinder to generate power; 2. Determining the vehicle's power performance, fuel economy, stability, and environmental friendliness. The 2020 Value Edition SWM X3 features a MacPherson independent front suspension and a five-link coil spring rear suspension. It is powered by a 1.5L naturally aspirated engine with a maximum horsepower of 112 PS, a maximum power of 82 kW, and a maximum torque of 152 Nm, paired with a 5-speed manual transmission.
2
2
Share

What to Do When ETC Signal is Weak?

The solutions for weak ETC signal are: 1. Reserve a cutout for ETC when installing metal film; 2. Replace with a new ETC device; 3. Change the installation position of the ETC. The installation method of the ETC device is: 1. Purchase the ETC device, check if the equipment is complete, and read the installation manual; 2. Determine the installation direction of the ETC device, with the solar panel facing outward; 3. Peel off the back adhesive of the device, fold the solar panel towards the vehicle's front windshield, and press firmly to ensure secure attachment; 4. Install the device at the center top of the vehicle's front windshield, ensuring it does not obstruct normal driving visibility. It should be adhered in one go and not removed for reattachment; 5. Insert the ETC card to activate the ETC device. Upon hearing a beep from the device and seeing the indicator light turn on, the device is activated, and the installation is complete.
9
4
Share

What are the drawbacks of ECU remapping for engines?

The drawbacks of ECU remapping for engines are: 1. It requires the use of higher-quality fuel, which increases driving costs; 2. If the ECU upgrade is not done properly, it can affect the engine's lifespan, cause the engine warning light to illuminate, and result in unbalanced power output; 3. Some vehicle models may experience excessive power after the upgrade, making the braking system inadequate, potentially leading to longer braking distances and safety concerns; 4. It may void the warranty. The function of an engine is: to convert the thermal energy of gasoline or diesel into mechanical energy by burning it in a sealed cylinder, causing the gas to expand and push the piston to perform work. The components of an engine include: 1. Valve train; 2. Crankshaft and connecting rod mechanism; 3. Ignition system; 4. Cooling system; 5. Lubrication system; 6. Starting system; 7. Fuel supply system.
3
3
Share

Should the engine be warmed up before an oil change?

It is necessary to warm up the engine before changing the oil. The method for warming up is: After starting the vehicle, let it idle for 1 to 2 minutes to allow the engine coolant to reach normal temperature. The steps for changing the oil are: 1. Lift the vehicle, remove the undercover, and place a container beneath the oil drain plug; 2. Unscrew the drain plug, use an air gun to blow into the oil filler port for two minutes, then tighten the drain plug after the oil has drained and wipe it with a tissue to check for leaks; 3. Reinstall the undercover, lower the vehicle, and add new oil through the filler port. Precautions for changing the oil include: 1. Perform the oil change while the engine is warm to ensure the old oil is drained as completely as possible; 2. Add the appropriate amount of new oil; 3. After adding the oil, start the engine and check all components for leaks. Let the engine run for 3 minutes to confirm the oil level is at the normal mark.
2
2
Share

Is Skoda a Joint Venture or Domestic Car?

Skoda is a joint venture car. Its body dimensions are: length 4675mm, width 1814mm, height 1460mm, with a wheelbase of 2686mm, fuel tank capacity of 68.5 liters, trunk capacity of 570 liters, and a body weight of 1440kg. The 2019 standard version of Skoda features a MacPherson independent front suspension and a four-link independent rear suspension. It is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, and maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
5
5
Share

What is the disassembly and installation method for the ŠKODA Superb navigation system?

The disassembly and installation method for the ŠKODA Superb navigation system is as follows: 1. Remove the button panel and air vents on the center console; 2. After removing the panel, unplug the connecting wires, loosen the relevant screws, take out the single-disc CD player, and disconnect the connecting wires to complete the disassembly; 3. Use screws and clips to install the new navigation device in the original center console panel position, remove the packaging from the navigation screen, and eliminate any bubbles on the screen film before completing the installation. The navigation modes include: 1. Path retrieval customization mode; 2. Site setting mode; 3. Map positioning mode. The functions of the navigation system are: 1. Search and processing of map data; 2. Map matching; 3. Route planning; 4. Human-machine interface; 5. Wireless communication.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.