How Many Times Can You Take the Driving Test Part 2?

1 Answers
VanCody
07/30/25 6:31am
You can take the Driving Test Part 2 up to five times, meaning you can schedule the test five times. Each scheduled test gives you two attempts. If you fail both attempts, you will need to retake the test. The rules for the Driving Test Part 2 are as follows: 1. You have two attempts during each test session, and you must pass all five test items in each attempt. If you fail any item, you must retake all five items. Note that starting from the third test session, you will need to pay a retake fee for each subsequent session. 2. If you fail the first attempt, you will immediately proceed to the second attempt, following the same process as the first attempt, using the same vehicle and the same test route. You will also need to verify your fingerprint again.
Was this review help?
11
0
Share
More Forum Discussions

How to Check for Driveshaft Problems?

Methods to check for driveshaft problems: 1. Check whether the connecting bolts between the flange and flange fork and the fixing bolts of the intermediate bearing bracket are loose; 2. Radially shake the front flange fork of the intermediate driveshaft to check the tightening condition of the flange nut; 3. Radially shake the rear flange of the intermediate driveshaft to check whether the flange nut is loose; 4. Check the fastening condition of the locking plate and shake the universal joint fork to check whether each universal joint is loose; 5. Check whether the driveshaft is bent and whether the balance weights have fallen off. The driveshaft is a high-speed rotating body with supports, composed of a shaft tube, telescopic sleeve, and universal joints.
9
2
Share

What does Xiaopeng NGP mean?

Xiaopeng NGP refers to Navigation Guided Pilot, an advanced driver assistance function achieved through the integration of Xiaopeng's XPILOT 3.0 system with navigation routes. After setting the navigation path, the vehicle can essentially perform automated navigation-assisted driving from point A to point B. While the driver remains the primary operator, many driving actions are actually completed by NGP. The Xiaopeng P7 is a mid-size pure electric vehicle under the Xiaopeng brand. Taking the Xiaopeng P7 2021 Rear-Wheel Drive Standard Range Intelligent Edition as an example, it features a 4-door, 5-seat sedan body structure with an official pure electric range of 480km (NEDC). In terms of powertrain, this model is equipped with a permanent magnet synchronous motor using lithium iron phosphate batteries, delivering a maximum power of 196kW and maximum torque of 390Nm, paired with a fixed gear ratio transmission.
2
1
Share

What is the correct way for beginners to hold the steering wheel?

For beginners, the correct hand position on the steering wheel is to place the left hand between the 9 and 10 o'clock positions and the right hand between the 3 and 4 o'clock positions. Below are detailed introductions about the steering wheel: 1. Adjustment method: The steering wheel's forward-backward and height distance adjustment should be done in a natural sitting position, with one hand extended to the top of the steering wheel, maintaining a slightly bent arm posture. 2. Function and role: The steering wheel is a wheel-shaped device used to control the direction of cars, ships, airplanes, etc. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. It mainly consists of a frame, foam, and mounting clips or screw holes corresponding to the driver's airbag (DAB).
17
1
Share

What Are the Causes of Ford Engine Failure?

Ford engine failure causes: 1. Excessive carbon buildup in the throttle or engine interior; 2. Poor engine combustion state; 3. Low-quality fuel; 4. Oxygen sensor malfunction leading to improper air-fuel mixture ratio; 5. Aging insulation layer of high-voltage wires. Solutions for Ford engine failure: 1. Clean the engine; 2. Use higher-octane gasoline; 3. Improve fuel quality; 4. Adjust, repair, or replace the throttle position sensor; 5. Clean or replace fuel injectors, change spark plugs; 6. Inspect the cooling system. Precautions for Ford engine failure: 1. Engine-specific cleaners should not be used on painted surfaces; 2. For stubborn dirt, use foam-type engine-specific cleaners; 3. Annual inspection is recommended, and always warm up the vehicle properly.
16
2
Share

Is the Wuling Hongguang S3 an SUV or what type of vehicle?

The Wuling Hongguang S3 is an SUV, with exterior dimensions of 4655 mm in length, 1735 mm in width, and 1790 mm in height. It has a wheelbase of 2800 mm, a front track of 1450 mm, a rear track of 1465 mm, and a fuel tank capacity of 49 liters. The Wuling Hongguang S3 is equipped with a 1.5L naturally aspirated engine and a 1.5L turbocharged engine, featuring multi-point fuel injection. The cylinder head is made of aluminum alloy, while the cylinder block is made of cast iron. It is paired with a 6-speed manual transmission. The front suspension uses a MacPherson strut independent suspension, and the rear suspension uses a semi-independent suspension with coil springs.
5
4
Share

How to Distinguish Between Ghost and Phantom?

The differences between Ghost and Phantom are as follows: In terms of body dimensions, the Ghost measures 5467mm in length, 1948mm in width, and 1550mm in height, with a wheelbase of 3295mm; the Phantom measures 5770mm in length, 2018mm in width, and 1648mm in height, with a wheelbase of 3552mm. In terms of maximum torque, the Ghost has a maximum torque of 820 Nm, while the Phantom has a maximum torque of 900 Nm. Regarding trunk capacity, the Ghost offers 490L, whereas the Phantom provides 548L. As for the chassis system, the Ghost features a double-wishbone independent rear suspension, while the Phantom is equipped with a multi-link independent rear suspension.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.