How Many Times Can You Retake the Driving Test?

2 Answers
DelAdriana
07/24/25 10:59pm
For each subject of the driving test, you can take it once, and if you fail, you can retake it once on the same day. If you fail both attempts on the test day, you can reschedule. There is no limit to the number of retakes for Subject 1 and Subject 4, but the number of retakes for Subject 2 and Subject 3 must not exceed 5 times. Notes for Subject 1 Exam: During the exam, read the questions carefully and choose answers cautiously, as you cannot modify your selection once clicked. For uncertain questions, you can skip them temporarily and move on to the next one, as there is ample time. However, make sure to review all questions at the end to avoid missing any. Notes for Subject 2 Exam: Before starting, clean both side mirrors and window frames from outside the car. Adjust the mirrors and seat properly inside the car and ensure they are fixed. Always remember to fasten your seatbelt. When taking the reverse parking test, it is best to choose the parking spot at the very back. Notes for Subject 3 Exam: Avoid changing lanes consecutively. Roads typically have multiple lanes. After starting the car, you will need to accelerate and change lanes. When changing lanes, do not switch across multiple lanes at once; instead, change one lane at a time. Notes for Subject 4 Exam: Follow the exam rules, manage your time well to prevent missing questions, and always bring your ID card. Other materials should comply with the exam center’s regulations. Sit upright to ensure your face is captured by the camera. Answer questions carefully—once you click "Next," you cannot modify previous answers. If you answer 5 questions incorrectly, the system will automatically notify you of failure, and you will need to retake the exam.
Was this review help?
18
5
Share
StNorah
08/10/25 3:13pm
I remember there were specific rules about the number of retakes when getting a driver's license. For theoretical tests like Subject 1 and Subject 4, there's no limit on retakes, but you have to wait 10 days after each failure before trying again. That's why I wasn’t too worried when I failed Subject 1 twice—I just needed to practice more. However, practical driving tests like Subject 2 and Subject 3 are different, with only 5 retakes allowed. I personally took three attempts to pass Subject 2, with a 10-day wait after each failure, which was quite stressful. If you fail all 5 times, you have to re-enroll in the entire driver's license course, starting from Subject 1 again, wasting both time and money. I recommend that beginners practice more in the driving simulation field before the test to reduce the failure rate—after all, safe driving is the most important thing.
Was this review help?
11
1
Share
Expand All
More Forum Discussions

Is the Teramont equipped with a supercharged engine?

The Teramont is not equipped with a supercharged engine; instead, all variants of the Teramont utilize turbocharged engines. The Teramont is powered by three different engines: a low-power version of the 2.0-liter turbocharged engine, a high-power version of the 2.0-liter turbocharged engine, and a 2.5-liter turbocharged engine. The low-power 2.0-liter turbocharged engine delivers maximum power between 4,100 and 6,000 rpm and maximum torque between 1,500 and 4,000 rpm. The high-power 2.0-liter turbocharged engine produces maximum power between 4,500 and 6,200 rpm and maximum torque between 1,500 and 4,400 rpm. The 2.5-liter turbocharged engine achieves maximum power at 6,000 rpm and maximum torque between 2,750 and 3,500 rpm. The Teramont is a new mid-to-large-sized SUV under SAIC Volkswagen, heavily inspired by the design of the CrossBlue concept car, giving it a robust and imposing appearance. In terms of details, the new vehicle features a dual-slat chrome horizontal grille that extends directly into the headlight assembly.
15
5
Share

Why Can't the Smart Key Open the Car Door?

Smart key failure to open the car door may be due to a malfunction in the smart key itself, such as when the remote control has no battery, or when the vehicle is in an environment with signal tower interference, causing issues with the smart remote system. Reasons why the car door cannot be opened: The remote control's battery is dead, preventing the car from unlocking during use; the car is parked in an environment with signal tower interference, disrupting the remote control's infrared signal; the smart remote system malfunctions, making it impossible to recognize the smart key for door operations. Solutions: Keyless start models usually have a slot for the smart key. Some models place this slot inside the center console, while others position it under the cup holder mat. When the smart key runs out of battery, inserting it into this slot allows the vehicle to detect the key and start the engine. Some keyless start models feature a metal key ignition slot. Locate this slot, insert the key blade from the remote control, and start the engine with one push.
13
4
Share

What is the fuel consumption of the Geely Vision X3?

Geely Vision X3 has a total of 3 models on sale. Among them, the 2021 PRO-1.5L-CVT Premium model, equipped with a 109 horsepower engine, has an NEDC fuel consumption of 6.1L per 100 kilometers. The 2021 PRO-1.5L Manual Elite and Manual Comfort models, both equipped with a 109 horsepower engine, have an NEDC fuel consumption of 5.9L per 100 kilometers. The fuel tank capacity of different Geely Vision X3 models is the same. The distance that can be covered with a full tank of fuel is as follows: For models equipped with a 109 horsepower engine, the fuel tank capacity is 42L, and the distance that can be covered with a full tank is 42/6.1*100=689km. For models equipped with a 109 horsepower engine, the fuel tank capacity is 42L, and the distance that can be covered with a full tank is 42/5.9*100=712km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when approaching a red light, can increase fuel consumption. The car itself: Cars with larger displacement generally consume more fuel than those with smaller displacement because larger displacement usually means higher power, requiring more gasoline to burn and perform work. Cars with greater weight also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low during cold starts, the injected gasoline is less likely to atomize, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine computer controls the use of higher RPMs to warm up the car, which also increases fuel consumption.
2
2
Share

How many years is the validity period before taking the Subject 1 test for a driver's license application?

The validity period before taking the Subject 1 test for a driver's license application is indefinite. After passing Subject 1, the validity period for the driver's license examination is three years. Subject 1 test content: Basic knowledge of motor vehicles; laws, regulations, and road traffic signals; safe driving and civilized driving basics; fundamental knowledge related to motor vehicle driving operations. Passing criteria for Subject 1: The total test duration for Subject 1 is 45 minutes. The test consists of 100 questions, including true/false and multiple-choice questions, with a full score of 100 points. A score of 90 or above is required to pass. The test questions are randomly selected and combined by the computer-based driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations." Subject 1 test procedure: Follow the instructions of the staff and collect your driving school file in order in the waiting area; Carry and present your ID card for inspection by the supervising officer; Mobile phones must be turned off upon entering the examination area; No loud noise is allowed in the examination area; Regulation textbooks are not allowed in the examination area (or should be placed in your bag); After the test, keep your ID card safe and submit the file to the "Document Submission Window" at the front of the examination area; Candidates who pass the test should sign under the guidance of the staff at the exit before leaving the examination area; Candidates who fail the test may leave the examination area and wait for notification from their driving school regarding the retake schedule.
9
3
Share

What Are the Common Spark Plug Failures?

Common causes of spark plug malfunctions include the following: Incorrect spark plug gap adjustment. If the gap is too small, it not only limits the contact area between the spark and the air-fuel mixture but also suppresses flame kernel growth due to the quenching effect of the electrodes. Although a spark occurs, it is weak, making it difficult to ignite the mixture. Conversely, if the gap is too large, the ignition voltage provided by the ignition system may be insufficient to generate a spark across the electrodes. Cracked spark plug skirt. High-voltage current leaks through the crack, preventing sparking at the electrodes. Carbon buildup on the electrodes, causing the central electrode to leak current to the surroundings instead of sparking to the side electrode. Excessive carbon deposits on the spark plug can short-circuit it, preventing sparking and eventually damaging the insulator, leading to spark plug failure. Damaged electrodes. Prolonged electrical erosion from sparks or chemical corrosion from combustion gases can cause electrodes to break or detach, preventing sparking. Low insulation resistance of the spark plug. This condition reduces the ignition voltage applied to the spark gap, weakening the spark or even completely disabling the ignition function. Short circuit in the high-voltage wires. If the high-voltage ignition wire from the ignition coil to the distributor leaks, the entire engine may fail to start. If the wire from the distributor to the spark plug leaks, the spark plug in one cylinder may not fire. Eroded platinum contacts. This can cause all spark plugs to fail, preventing the engine from starting or running normally. Spark plug failures manifest in the following ways: Difficulty starting the car, whether cold or hot, often requiring multiple ignition attempts. Engine shaking, noticeable while driving. Reduced power, with a noticeable lack of acceleration compared to normal conditions. Increased fuel consumption. Stalling. Failed emissions tests. Faulty spark plugs should be replaced promptly. The replacement steps are as follows: Open the hood, remove the engine's plastic cover, and disconnect the high-voltage wires, marking each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one, ensuring no leaves, dust, or debris are present, and clean the area thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, then use the socket to fully tighten it. Reinstall the high-voltage wires in the correct firing order and reattach the cover. Spark plug replacement interval: Typically, spark plugs should be replaced every 40,000–60,000 km under normal maintenance conditions. However, this may vary depending on the brand and engine type, so always refer to the owner's manual for guidance.
3
2
Share

Is the Order of Subject Three Exam Random?

Subject Three exam order is randomized and cannot be chosen by examinees. Below are details about the Subject Three exam: 1. Exam Requirements: Subject Three consists of road driving skills and safety/civilized driving knowledge tests, each scored out of 100 points with 90 being the passing mark. 2. Training Hours Requirement: Subject Three requires 40 training hours total - 16 for theory, 4 for simulation, and 20 for practical driving. Per the syllabus, training hours are logged cumulatively with a maximum of 4 hours recordable per student daily.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.