How many times can you fail the driving test before you are no longer allowed to continue taking the exam?

What is the reason for brake noise after replacing brake pads?

After replacing the brake pads, the reason for brake noise is that the brake pads have not yet adapted to the brake disc and are in the break-in period. Brake pads, also known as automotive brake linings, refer to the friction materials fixed on the brake drum or brake disc that rotates with the wheel. The friction lining and friction block bear external pressure to generate friction, thereby achieving the purpose of vehicle deceleration. Precautions for purchasing brake pads: 1. Check the friction coefficient, which determines the braking torque of the brake pads. Too high a coefficient can cause wheel lock-up, loss of directional control, and burning of the pads during braking, while too low a coefficient results in longer braking distances. 2. Consider safety. Brake pads generate high temperatures during braking. At high speeds or during emergency braking, the friction coefficient of the lining decreases under high temperatures. 3. Check for comfort, including braking feel, noise, dust, smoke, and odor.

8

0

Share

Should the Verna use 20 or 30 engine oil?

The Verna can use fully synthetic 20 engine oil. Engine oil change interval: Most engine oils abroad are changed at 10,000 kilometers, while domestic manufacturers in China generally advance the change interval to 7,500 kilometers or even 5,000 kilometers due to poor road conditions. However, in reality, as long as the oil color is clear, the oil level is not below the marked minimum level, and there are no special circumstances, the engine oil does not need to be changed so frequently. Functions of engine oil: Cooling and temperature reduction, sealing and leak prevention, cleaning, shock absorption and buffering, lubrication to reduce wear, rust and corrosion prevention, and component protection. Engine oil, also known as engine lubricating oil, is composed of base oil and additives. Base oil is the main component of lubricating oil, determining its basic properties, while additives can compensate for and improve the shortcomings of base oil performance.

3

1

Share

What does the C1 Subject 2 test include?

The C1 Subject 2 driving test primarily consists of five items: reverse parking into a garage, parallel parking, curve driving, right-angle turning, and hill start and stop. For automatic transmission (C2) vehicles, the hill start and stop is not included in Subject 2. A C1 driver's license permits the holder to drive small and micro passenger vehicles. C1 test comprises four subjects in total, with the other subjects as follows: Subject 1: Mainly tests basic road traffic knowledge; Subject 3: Tests 16 driving skills including preparation before starting, starting, and straight-line driving; Subject 4: Tests safe and civilized driving operation requirements, similar to Subject 1, it is a theoretical test. Subject 2 test tips: Before starting the car during the Subject 2 test, ensure the seat height is adjusted correctly, adjust the rearview mirror for a broad field of vision, and fasten the seatbelt. During the test, do not stop unless the system announces a failure. For parallel parking, find the right angle quickly, steer the wheel promptly, react swiftly, and coordinate with the vehicle's speed. For hill start, remember to pull the handbrake, turn on the left turn signal when starting, release the handbrake, stabilize the clutch, and gently press the accelerator while releasing the clutch to avoid stalling or rolling back. For right-angle turning, identify the reference point before turning and coordinate with the vehicle's speed. For curve driving (S-curve), slow down and proceed cautiously. For reverse parking, control the speed, identify the reference point, and make minor adjustments if deviations are observed in the rearview mirror. Subject 2 scoring deductions: Reverse parking: Vehicle body crossing the line results in a 100-point deduction and failure; incomplete parking results in a 100-point deduction and failure; stopping midway deducts 5 points each time; failure to complete within the allotted time results in a 100-point deduction and failure. Parallel parking: Vehicle body crossing the line after stopping results in a 100-point deduction and failure; stopping midway deducts 5 points each time; tires or body touching the curb deducts 10 points; failure to complete within the allotted time results in a 100-point deduction and failure. Curve driving: Wheels crossing the road edge line results in failure; stopping midway results in failure; not using second gear or above deducts 5 points. Right-angle turning: Wheels crossing the road edge line results in failure; stopping midway deducts 5 points each time. Hill start and stop: If the front bumper or motorcycle front axle is not aligned with the pole line and exceeds 50cm, it results in failure; exceeding the allotted start time results in failure; if the front bumper or motorcycle front axle is not aligned with the pole line but does not exceed 50cm, 10 points are deducted; if the vehicle body is 30-50cm from the road edge line, 10 points are deducted; failure to engage the parking brake deducts 10 points.

18

5

Share

How to Reset the Tire Pressure Warning on the Lynk & Co 01?

The method to reset the tire pressure warning on the Lynk & Co 01 is: 1. Adjust the reference value of the tire pressure monitoring system through the central display screen; 2. Locate the tire pressure monitoring system button on the central display screen for calibration; 4. The system will display a message indicating the start of calibration. After calibration is completed, drive the car at a speed of approximately 30 km/h for about ten minutes, and the new tire pressure values will be set. The Lynk & Co 01 has a body size of 4512mm in length, 1857mm in width, and 1673mm in height, with a wheelbase of 734mm. In terms of appearance, the Lynk & Co 01 continues the overall design style of the standard model. The interior design also remains consistent with the standard model, except for an additional PHEV badge above the glove box and the inclusion of blue accents in various details to highlight its identity as a new energy vehicle.

9

2

Share

What type of engine oil should be used for the Besturn X80?

The original engine oil specification for the Besturn X80 is fully synthetic SM5W40, and brands such as Mobil and Shell can be used. Engine oil replacement cycle: Most foreign engine oils are replaced at 10,000 kilometers. However, due to poor road conditions in China, domestic manufacturers generally recommend replacing the oil earlier, at 7,500 kilometers or even as early as 5,000 kilometers. In reality, as long as the oil remains clear, the oil level does not fall below the minimum mark, and there are no special circumstances, the oil does not need to be replaced so frequently. Functions of engine oil: Cooling and temperature reduction, sealing and leak prevention, cleaning, shock absorption and buffering, lubrication to reduce wear, rust and corrosion prevention, and component protection. Engine oil, also known as motor oil, is composed of base oil and additives. The base oil is the main component of the lubricant, determining its basic properties, while the additives compensate for and improve any deficiencies in the base oil's performance.

17

2

Share

What car has four stars?

Four stars represent the Venucia brand, which is a subsidiary of Dongfeng Motor. Venucia body dimensions: The Venucia measures 4630mm in length, 1845mm in width, and 1653mm in height, embodying a stylish and avant-garde design. Within a year and a half, Venucia launched three high-quality models—D50, R50, and R50X—to fully meet the needs of consumers in the mass market. All three models are based on the same global platform, tailored specifically for Chinese consumers according to different market demands. Venucia trunk dimensions: This larger compact SUV from Venucia not only offers spacious and comfortable seating but also features a generously sized trunk. The rear seats can be folded down in a 60/40 split to expand the cargo space. The trunk's minimum and maximum depths are 935mm and 1830mm respectively, with a width of 1110mm and a height of 850mm, providing a standard volume of 534L.

6

0

Share

How many times can you fail the driving test before you are no longer allowed to continue taking the exam?

What is the reason for brake noise after replacing brake pads?

Should the Verna use 20 or 30 engine oil?

What does the C1 Subject 2 test include?

How to Reset the Tire Pressure Warning on the Lynk & Co 01?

What type of engine oil should be used for the Besturn X80?

What car has four stars?

What is the method for removing car film?

Why Are So Many People Selling Wuling Zhengcheng?

Where should the fire extinguisher be placed in the car?

What brand is the Audi audio system?