How Many Times Can You Fail Subject 2 Before Being Disqualified?

2 Answers
OliviaLynn
07/25/25 3:41am
You cannot continue taking Subject 2 after failing 5 times. The penalty items for Subject 2 are as follows: 1. Front and rear stopping distance: If the front bumper or front axle of the vehicle is not aligned with the pole line after stopping, and the deviation exceeds 50 cm, it is a failure; if the deviation does not exceed 50 cm, 10 points are deducted. 2. Left and right stopping distance: If the body of the vehicle is more than 30 cm away from the road edge line after stopping, 10 points are deducted; if it is more than 50 cm away, the test is failed. 3. Rolling back: If the vehicle rolls back 30 cm but not more than 50 cm after starting, 20 points are deducted; if it rolls back 50 cm, the test is failed. 4. Stalling: Stalling on a slope results in a 20-point deduction; if the vehicle is not restarted within 30 seconds after stopping, it is a failure due to timeout.
Was this review help?
9
5
Share
EzraAnn
08/10/25 5:04pm
To be honest, I only found out about this rule recently when I was helping my driving school instructor organize materials. There's an overall limit on the number of driving test attempts, with a maximum of 5 tries for each subject. If you fail Subject 2 five times in a row, your previous Subject 1 results will be invalidated. You'll have to start over from Subject 1 when reapplying for the test. I've seen students who failed four times and were just a little short of passing, so stressed they couldn't sleep. My advice is, if you haven't passed by the third attempt, don't rush to pay for a retest immediately. Have the instructor thoroughly review the issues with you—maybe you're not remembering the reference points accurately or having trouble with clutch control. Five chances are actually quite generous; the key is identifying the problem.
Was this review help?
7
3
Share
Expand All
More Forum Discussions

Should Volkswagen EA211 use 5W30 or 5W40?

Volkswagen EA211 can use either 5W30 or 5W40 engine oil. If the engine is relatively old, it is recommended to use 5W40 oil. Both 5W30 and 5W40 refer to the SAE grade of the engine oil, indicating the viscosity value of the oil. The "W" stands for "Winter," and the number before it represents the lower environmental temperature at which the oil can be used, providing better protection for the engine during cold starts. The exterior dimensions of the Volkswagen EA211 are 4865mm in length, 1832mm in width, and 1471mm in height, with a wheelbase of 2871mm. The engine is a 1.4T turbocharged unit, the body structure is a 4-door, 5-seater sedan, the transmission is a 7-speed dual-clutch, with a maximum torque of 250 Nm and a maximum power of 110 kW.
9
4
Share

What Causes the Clutch to Fail to Engage Gears?

When the clutch pedal is depressed but the gears cannot be engaged, the most common cause of failure is the presence of debris inside the clutch, which leads to improper adjustment of the booster push rod's travel. This results in air entering the clutch's hydraulic system, preventing the clutch plates from separating cleanly. Below are relevant details about the clutch: 1. Description One: The clutch is a mechanical device located between the engine and the transmission. The output shaft of the clutch serves as the input shaft of the transmission. Automotive requirements for the clutch include rapid disengagement, smooth connection, and sufficient heat dissipation capability. 2. Description Two: During driving, the driver operates the clutch pedal to separate or connect the engine and the clutch, thereby cutting off or transmitting the engine's power to the transmission. All vehicles are equipped with a clutch, which is an assembly connecting the vehicle's drivetrain to the engine system. It reduces gear-shifting impacts during vehicle operation and protects the engine.
19
1
Share

How to Install the Rear Seat Covers for Tiggo 5x?

Here are the steps to install the rear seat covers for Tiggo 5x: 1. Remove the rear seat headrests and place the backrest covers over the backrests, securing the top part with hooks. 2. Fix the lower part by inserting the cushion clips into the gap between the backrest and the seat cushion. 3. Place the seat cushion covers over the rear seat cushions and secure them again by inserting the cushion clips into the gap between the backrest and the seat cushion. 4. Reinstall the rear seat headrests and cover them with the headrest covers, securing them with buckles. Here is some additional information: Car seat covers refer to the covers for car seats, which help keep the original seats clean and prevent leather aging. Car seat covers are generally divided into universal seat covers and custom-fit seat covers. Universal seat covers are made of highly elastic fabric, providing significant contraction and expansion space.
18
5
Share

What Causes the Engine to Stall During Reverse Parking?

If the clutch is pressed too low, the resistance increases when turning the steering wheel, which naturally causes the engine to stall. Below is an introduction to Subject 2: Overview: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. For small vehicles (C1 and C2), the test items include five mandatory components: reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-turns). Some regions also include a sixth item: high-speed toll card collection. Teaching Aids: Teaching Software: Students can use driver simulation test software on mobile or computer devices to study traffic regulations. Teaching Materials: "Safe Driving Starts Here," compiled by the Ministry of Transport of the People's Republic of China. Driving schools may provide these learning materials uniformly, or students may purchase them at their own expense.
12
1
Share

When to Turn on the Turn Signal During a Right-Angle Turn?

You should turn on the turn signal in advance for a right-angle turn. When entering the right-angle turn, there will be a voice announcement saying 'Please start the right-angle turn.' After the announcement ends, you must turn off the turn signal. Sometimes, the steering wheel may automatically return, so it's important to note that there is a time limit for keeping the turn signal on during a right-angle turn. Additional notes: Things to pay attention to during a right-angle turn: 1. After turning on the signal, it's best to use your finger to prevent the steering wheel from automatically returning, as an automatic return will result in a 10-point deduction. 2. If the turn signal turns off automatically when returning the steering wheel, you must immediately reactivate it; otherwise, it will be considered as not using the turn signal, resulting in a 10-point deduction. Turning it off too early is also not allowed, and failing to return the turn signal after completing the right-angle turn will also lead to point deductions.
18
3
Share

What are the materials of car covers?

Car cover materials: Car covers are divided into PVC material, single-coated material, double-coated flame-retardant material, nano flame-retardant material, leather oil material, and gold-pulled flame-retardant material. Here is the relevant information: 1. PVC material: Car covers made of PVC material have good dustproof and rainproof effects, but they are not sunproof or scratch-resistant, and can only be used on one side. PVC car covers only come in silver, are relatively heavy, usually weighing around 3-4 kilograms, and have a service life of about 2 years. 2. Single-coated material: Car covers made of single-coated material have good dustproof and sunproof effects, but they are not rainproof or scratch-resistant, and can only be used on one side. Single-coated car covers only come in silver, which is very effective in blocking ultraviolet rays. They are relatively light, usually weighing around 1 kilogram, and have a service life of about 2 years.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.