How Many Times Can a Temporary License Plate for a New Car Be Applied For?

How Many Lumens Do LED Headlights Generally Have?

Currently, there are three types of car headlights commonly used, listed in the order of their introduction: 1. The first type is the original halogen bulb, with a 55w halogen bulb producing 1000 lumens. 2. The second type is the xenon lamp, with a 35w xenon lamp producing 3500 lumens, equivalent to 100 lumens per watt. 3. The third type is the LED headlight. A 35w LED lamp produces 3200 lumens, equivalent to 91 lumens per watt. More information about car LED headlights is as follows: 1. Introduction: Car headlights, also known as front headlights, are lighting fixtures used to illuminate the road ahead during nighttime driving, symmetrically installed on both sides of the front end of the vehicle. 2. Working Principle: LED is an electroluminescent device that uses a solid-state semiconductor chip as the light-emitting material, emitting light directly through photon emission caused by carrier recombination. LED headlights are lighting devices manufactured using LEDs as the light source.

19

2

Share

What documents are required for a vehicle annual inspection agent?

Vehicle annual inspection agents need to bring the vehicle license with both original and duplicate copies, the duplicate copy of compulsory traffic insurance, and the vehicle and vessel tax payment receipt. Below is relevant information: 1. Meaning of annual inspection: Vehicle annual inspection refers to a mandatory test for all vehicles that have obtained official license plates and vehicle licenses. It is equivalent to an annual physical examination for vehicles conducted in accordance with the "Technical Conditions for Motor Vehicle Operation Safety." 2. Exemption policy: Non-operational small private passenger vehicles with 7 seats or fewer (including 7 seats) are exempt from inspection for 6 years, meaning the vehicle is exempt from on-site inspection. However, the owner still needs to pass the exhaust emission test within the specified period (usually 2 years) and then apply for the inspection compliance mark at the vehicle management office, motor vehicle registration service station, or traffic police squadron. The mark should be affixed to the upper right corner of the vehicle's front windshield.

13

5

Share

What kind of engine oil should be used for BMW 118?

BMW 118 now generally uses original engine oil, with three models available: 5w30, 0w40, and 0w30, all of which can be used. Introduction to engine oil: Engine oil, also known as engine lubricant (English name: Engine oil), has a density of approximately 0.9110 kg/m3. It serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption for the engine. It is hailed as the 'blood' of the car. Composition of engine oil: Engine oil consists of two parts: base oil and additives. The base oil is the main component of lubricating oil, determining its basic properties. Additives can compensate for and improve the shortcomings of the base oil's performance, endowing it with certain new properties, making them an important part of lubricating oil.

15

4

Share

How long is the validity period of a car's vehicle license?

The vehicle license is valid indefinitely, but it still requires annual inspection. The inspection validity period is marked on the supplementary page, which essentially indicates the deadline for the annual inspection. Therefore, the validity period of the vehicle license is also tied to the annual inspection. For vehicles exempt from inspection for the first 6 years, they are exempt from on-site testing during this period, and annual inspection only starts from the sixth year, with the vehicle license valid for 5 years. For vehicles older than 6 years, they require annual inspection, with the vehicle license valid for 1 year. For vehicles older than 15 years, they require biannual inspections, with the vehicle license valid for 6 months. Relevant information about the driver's license is as follows: 1. Introduction: The People's Republic of China Motor Vehicle Driver's License, commonly referred to as the driver's license or 'driver's permit,' is a mandatory certification for motor vehicle drivers under the laws of the People's Republic of China. 2. Examination Content: The test subjects include traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving).

5

4

Share

Why does the malfunction indicator light come on after refueling?

After refueling, if the engine malfunction indicator light comes on, it is generally caused by fuel-related issues. Poor fuel quality can lead to the oxygen sensor reporting a fault after combustion in the engine. It is recommended to visit a 4S shop for a detailed inspection to avoid affecting vehicle performance. Below are relevant explanations: 1. Reasons for the malfunction indicator light: There are many reasons why the engine malfunction indicator light may come on, such as a fault in the purge solenoid valve controlling fuel vapor emissions, a malfunctioning air flow meter, faulty ignition coils, a thermostat issue, engine problems, a faulty three-way catalytic converter, oxygen sensor failure, or excessive carbon buildup on the electronic throttle. 2. How to handle the malfunction indicator light: When the engine malfunction indicator light comes on, you can first observe the situation yourself. If it is a major fault, it may be accompanied by symptoms such as loss of engine power, severe shaking, rising water temperature, and multiple warning lights on the dashboard. In such cases, it is necessary to stop the vehicle and wait for professional assistance.

8

3

Share

Can Fuel Injectors Be Repaired?

Clogged fuel injectors can be cleaned and repaired, but if issues persist after cleaning, replacement is necessary. Faulty fuel injectors can lead to dirty blockages, causing issues such as distorted injection, poor atomization, inaccurate fuel delivery, reduced power, poor acceleration, and excessive emissions. Methods to test and determine the condition of electromagnetic fuel injectors: The key is to check whether the internal fuel passages are blocked, whether the needle valve fails to close tightly, and whether the electromagnetic coil is functioning properly. During testing, you can first use the cylinder cut-off method to identify which cylinder's electromagnetic fuel injector is faulty, then follow these steps: First, connect a 12V power supply to one end of the injector's wiring socket and intermittently ground the other end to the engine body, observing for slight vibrations and listening for a faint clicking sound. If none are detected, check for faults in the wiring connected to the injector. Next, inspect whether the fuel supply line is blocked. Then, check if the injector's fuel inlet is clogged, and finally, test whether the electromagnetic coil is open-circuit and whether the injector nozzle is blocked.

13

3

Share

How Many Times Can a Temporary License Plate for a New Car Be Applied For?

How Many Lumens Do LED Headlights Generally Have?

What documents are required for a vehicle annual inspection agent?

What kind of engine oil should be used for BMW 118?

How long is the validity period of a car's vehicle license?

Why does the malfunction indicator light come on after refueling?

Can Fuel Injectors Be Repaired?

Why does the car fan keep running?

What is the wheelbase of the Civic?

What to Do If You Discover Your Vehicle Has Been Cloned?

Can a Tesla Supercharger Be Installed at Home?