How many times a year should a pickup truck be inspected after 10 years?

1 Answers
Whitney
07/30/25 10:47am
New pickup trucks are exempt from inspection for the first 6 years, but they need to be stamped for annual review at the vehicle management office every two years during the first 6 years. From the 7th to the 15th year, they require an annual inspection, and after 15 years, they need to be inspected every six months. Pickup trucks that fail to meet inspection standards or exceed 600,000 kilometers must be scrapped. Here is an extended introduction: Introduction to pickup truck scrapping rules: According to regulations, pickup trucks are classified as light-duty trucks and must be scrapped when they reach 15 years of service or 600,000 kilometers. However, some regions have slightly relaxed these rules, allowing pickup trucks to continue operating as long as they pass the annual inspection, even if they reach the age or mileage limit. Additionally, some pickup trucks with covered cargo beds, meaning the cargo area has a rear cover, are classified as multi-purpose passenger vehicles. These can enjoy the same treatment as passenger vehicles and are no longer subject to mandatory scrapping based on age.
Was this review help?
14
4
Share
More Forum Discussions

What are the differences between the Suzuki UU Centennial Edition and the older version?

Suzuki UU Centennial Edition differs in price, tires, and color. The following are the differences between the Suzuki UU Centennial Edition and the regular version: 1. Price: The Suzuki UU Centennial Edition is priced about 10% higher than the regular version, with variations in different regions. You can choose according to your financial capability. 2. Tires: The Suzuki UU Centennial Edition is equipped with Fuji Tires, which is an upgrade compared to the regular version. 3. Color: The Suzuki UU Centennial Edition comes in two colors—matte blue and matte gray, with red-painted calipers and springs.
3
2
Share

What type of engine oil is best for the Arrizo 5?

Arrizo 5 requires engine oil with SM grade or higher specifications. Below are the recommended engine oil options for different situations: 1. Manufacturer's recommendation: The original factory uses SM grade 10W-40 engine oil, with semi-synthetic oil being the preferred choice. 2. Others: You can choose the appropriate engine oil based on the current environment of the car. There are no strict requirements on the brand of the oil, as long as it meets the specifications. If the temperature in your area is low, you should switch to 5W-40 grade engine oil. Alternatively, you can use fully synthetic oil. Fully synthetic oil offers better performance, resulting in lower engine noise and reduced wear, although it requires more frequent oil changes.
5
4
Share

Can You Use Air Conditioning While Charging a Tesla?

You can use air conditioning, but it is not recommended. Pure electric vehicles can turn on the air conditioning while charging, but doing so will increase the charging time. More importantly, using electrical appliances in the car during the charging process will cause the reaction substances inside the battery to accelerate due to the current in the entire cycle, speeding up the battery's decay rate. Simultaneous charging and discharging will accelerate battery aging and may increase the probability of spontaneous combustion. The following are additional hazards of using air conditioning while charging a pure electric vehicle: 1. Slower charging speed: Since most new energy electric vehicles use a relatively stable voltage and current state during the charging process, using high-power appliances like air conditioning requires higher voltage, which can cause unstable current and affect charging efficiency. 2. Damage to battery life: The current in the entire cycle will cause the reaction substances inside the battery to accelerate, speeding up the battery's decay rate. Simultaneous charging and discharging will accelerate battery aging and may increase the probability of spontaneous combustion.
20
1
Share

Is Ozone Disinfection Useful for Sedans?

Ozone disinfection for cars is effective, as it has a significant killing effect on many bacteria, molds, viruses, fungi, protozoa, and oocysts. Below are the specific advantages and disadvantages of ozone disinfection for cars: 1. Advantages: The benefits of ozone disinfection lie in its simplicity and speed of operation, requiring very little time, and providing thorough disinfection results. However, it is essential to clean the interior before ozone disinfection; otherwise, the disinfection will only address the symptoms rather than the root cause. 2. Disadvantages: After ozone disinfection, one should not enter the car immediately, as high concentrations of ozone can easily cause symptoms such as coughing, nausea, and chest tightness. Additionally, prolonged use of ozone disinfection can lead to the aging of rubber materials inside the car.
12
2
Share

How to Identify Damaged Pressure Bearings?

Identify damaged pressure bearings from the following points: 1. Abnormal noise: When the pressure bearing is damaged due to wear, the vehicle's shock absorber will produce noise during operation. 2. Directional deviation: When the pressure bearing is damaged, the vehicle's direction may slightly deviate, and the return force may be weak. 3. Increased noise: Due to the damaged pressure bearing, the shock absorber will transmit vibrations and impacts directly from the frame to the passenger compartment during operation. Below is relevant information about pressure bearings: 1. Pressure bearings bear part of the vehicle's weight, and the vibrations generated during driving will impact the pressure bearings through the suspension. Therefore, try to avoid potholes or stones on the road while driving. 2. When encountering speed bumps, slow down and minimize driving over curbs, as these actions can greatly impact the pressure bearings. 3. Avoid turning the steering wheel while the vehicle is stationary, as the tire's grip on the ground is stronger when the vehicle is not moving, increasing the pressure on the pressure bearings. Turning the steering wheel in this state will accelerate wear and reduce the lifespan of the pressure bearings.
10
0
Share

How many years can the paint sprayed at a 4S store last?

Normally, the paint sprayed at a 4S store can last for about 4-5 years under regular use. Below is a detailed introduction to the 4S store paint spraying process: 1. Cleaning and sanding: After scratches or collisions, sheet metal repair is usually required to restore the basic shape. Professional paint sanding tools are used to remove the original paint, exposing the metal panel. 2. Filling dents: Applying putty mainly ensures a smooth paint surface and fills in any dents. This process is typically done three times, as it directly affects the final paint result. 3. Base preparation: A paint scanner is used to match the car's paint color, followed by manual fine-tuning. Since different vehicles have varying years of use, the paint may have slight variations, requiring the technician to compare the paint sample with the car body color on-site. 4. Spray painting: The main types of paint used are standard paint, metallic paint, and pearl paint.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.