How many subjects are there in the current driving test?

1 Answers
DeJesse
07/25/25 12:53pm
There are four subjects in the driving test. The content and passing standards of the test subjects are unified nationwide. The test sequence is conducted in the order of Subject 1, Subject 2, Subject 3, and Subject 4. Only after passing the previous subject can you take the next subject. Here is some introduction about the driving test: 1. Driver's License: The full name of the driver's license is the motor vehicle driver's license, also known as the "driver's license". It is the certificate required by law for motor vehicle drivers. 2. Test Content: The test subjects include traffic regulations and related knowledge, field driving, road driving, etc. The order of the test subjects is traffic regulations and related knowledge (referred to as Subject 1), field driving (referred to as Subject 2), and road driving (referred to as Subject 3). During the test, if the previous subject is failed, the following subjects will not be conducted. Each subject test has two chances. If both chances are failed, the current test will be terminated.
Was this review help?
10
2
Share
More Forum Discussions

What to Do When the Yellow Triangle Exclamation Warning Light Comes On?

The solutions for the yellow triangle exclamation warning light: 1. Check whether the generator, power steering pump, steering gear, and other mechanisms are damaged; 2. Inspect the connection parts of each component to see if there are any loose areas; 3. Check whether the tire pressure is at the normal level; 4. Examine parts such as the power steering pump and steering gear. Reasons why the yellow triangle exclamation warning light comes on: 1. The traction control light illuminates to remind the driver to turn off the traction control system. If this light stays on when the traction system is activated, it indicates a problem with the TCS; 2. The tire pressure light indicates abnormal tire pressure, meaning the tire pressure sensor has detected incorrect pressure in one or more tires. It is recommended to visit a tire shop to check the tire pressure; 3. The automatic transmission fault warning light indicates that there is an issue with the transmission, the transmission lubricant is below the normal range, or the lubricant needs to be replaced.
19
3
Share

What to Do If Your Car Breaks Down on the Road?

If your car breaks down on the road, you can contact your insurance company, etc. Here are some methods to deal with a broken-down car: 1. Methods: If the vehicle is still under warranty, call the 4S store. If it's not under warranty, call your insurance company for assistance, and they will send someone to rescue you. If the vehicle breaks down on the highway, you can call 12122 for road assistance. If the vehicle breaks down near the city, you can search for nearby repair shops on Gaode Map. 2. Precautions: If your car breaks down on the highway and requires temporary parking for inspection and repair, you should turn on the turn signal in advance, leave the driving lane, and park in the emergency parking lane or on the right shoulder as required. Passengers should also quickly move to the right shoulder or the edge of the emergency parking lane, exit the car from the right door, and immediately contact the local traffic police.
15
5
Share

What are the solutions for a blurry reversing camera?

The solutions for a blurry reversing camera are: 1. If the camera lens is covered with dust or dirt, simply clean it with a dry cloth; 2. If the blurriness is caused by water ingress, use a hot air blower to blow on the camera for a few minutes; 3. If the blurriness is due to the brightness and contrast settings of the central control display, adjust these settings in the vehicle's system until the reversing image becomes clear. The reversing camera, also known as a parking assist system, or reversing visual system, or onboard monitoring system, is widely used in various large, medium, and small vehicles for reversing or driving safety assistance.
4
2
Share

Will you fail if the speed is below 20 km/h in third gear during Subject 3?

You will not fail if the speed is below 20 km/h in third gear during Subject 3. Here is some information about gear shifting in Subject 3: 1. Gear requirements in Subject 3: 1st gear speed should not exceed 20 km/h, 2nd gear speed should not exceed 30 km/h, 3rd gear speed should not exceed 40 km/h, 4th gear speed should not be lower than 20 km/h, and 5th gear speed should not be lower than 25 km/h. 2. Gear shifting method: Use 1st gear for starting and turning around during the Subject 3 test, use 2nd gear for turning. After shifting to 2nd gear, if the road conditions ahead are ideal, release the throttle, press the clutch immediately, and shift to 3rd gear. After shifting to 3rd gear, observe the road conditions. If the road conditions are good, shift directly to 4th gear, press the throttle to increase the speed, and finally shift to 5th gear.
20
2
Share

Why does the Mercedes-Benz C-Class turn off the engine when the coolant stops?

The reasons why the Mercedes-Benz C-Class turns off the engine when the coolant stops are as follows: Low engine temperature: Fuel is also difficult to volatilize and vaporize. If there is severe carbon buildup in areas such as the fuel system and intake tract, these carbon deposits will first absorb some fuel vapor. This can easily cause the mixture entering the cylinder for combustion to be too lean, leading to unstable idling or the engine stalling immediately after ignition. If you try to start the engine several times, the carbon deposits will absorb enough fuel vapor, and the mixture entering the cylinder for combustion will meet the standard, allowing the engine to start. Fuel pump malfunction: The fuel pump may suddenly get stuck or experience other faults, causing it to rotate insufficiently or stop, resulting in insufficient fuel supply and stalling. Low fuel system pressure, such as low fuel pump pressure, fuel line leaks, insufficient electrical current, or a damaged fuel pressure regulator, can also cause insufficient fuel supply. Clogged or leaking fuel injectors can lead to poor atomization, resulting in insufficient fuel supply and stalling.
20
1
Share

At what mileage does the Volkswagen Magotan start burning oil?

The Volkswagen Magotan generally starts burning oil at around 100,000 kilometers. Consequences of burning oil: Burning oil can cause incomplete combustion in the engine's combustion chamber, leading to increased carbon deposits, reduced vehicle power performance, and sluggish acceleration. It also results in higher fuel consumption, more severe exhaust emissions—potentially exceeding standards—and increased financial burden on the car owner. Solutions for burning oil: It is necessary to inspect the entire oil lubrication system, remove accumulated carbon deposits from combustion, ensure the smooth operation of intake and exhaust valves, and replace aged or damaged valve seals and crankshaft seals. Additionally, the gap between the engine cylinders should be minimized to maintain optimal engine temperature.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.