How Many Subject 2 Driving Tests Can Be Scheduled Simultaneously?

How many painted surfaces does a car have?

A car has a total of 13 painted surfaces. Locations of painted surfaces: Front and rear bumpers (2), left and right front fenders (2), left-side doors (2), right-side doors (2), left and right rear fenders (2), front hood (1), rear trunk lid (1), and vehicle roof (1). Paint composition: Automotive paint typically consists of four basic components: film-forming substances (resins), pigments (including extender pigments), solvents, and additives.

1

3

Share

What are the dimensions of a parking space?

Standard parking space dimensions are primarily divided into two sizes: large and small. Large parking spaces measure 15.6 meters in length and 3.25 meters in width, suitable for medium and large vehicles. Small parking spaces measure 6 meters in length and 2.5 meters in width, suitable for small vehicles. Parking space arrangements can be categorized into three types: parallel, angled (30°, 45°, 60°), and perpendicular. Large vehicle parking spaces should not use angled or perpendicular arrangements. 1. Parallel parking space: Standard length is 6 meters, width is 2.5 meters. 2. Angled parking space: The slanted length should be 6 meters, width 2.8 meters, with a vertical distance between the two slanted lines maintained at 2.5 meters. 3. Perpendicular parking space: Length should be no less than 5 meters, typically set at 6 meters, width 2.5 meters, with 2.5x5.3 meters being the optimal standard size. 4. Determination method: Generally, standard parking space dimensions are determined based on vehicle size. Small parking spaces use dimensions of 2.5~2.7×5~6 meters, single-lane turning lanes should be no less than 3.5 meters wide, double-lanes no less than 5 meters. Turning sections should accommodate a vehicle's need for a single-turn maneuver. For safety or to accommodate medium and large vehicles, dimensions are often set to 6 meters or more.

20

1

Share

What does high fuel tank pressure mean?

High fuel tank pressure occurs when the temperature of gasoline increases during driving, causing slight evaporation. This results in the formation of gasoline vapor inside the tank, leading to increased pressure. It is recommended to use a fuel additive to reduce the pressure. The causes of high fuel tank pressure are as follows: 1. Clogged fuel tank cap regulator valve: High fuel tank pressure may be caused by a clogged fuel tank cap regulator valve, a blocked carbon canister, or a damaged solenoid valve. If the fuel tank cap regulator valve is clogged, it will lead to excessive pressure inside the fuel tank. In this case, the valve should be disassembled and cleaned. 2. Carbon canister blockage: If the fuel tank is overfilled during refueling, some fuel may evaporate and enter the carbon canister, forming particles inside and causing blockage. If the solenoid valve is damaged, the engine's pipeline system cannot properly ventilate, preventing the release of fuel vapor from the fuel tank and causing the internal pressure to rise. 3. Hazards of high fuel tank pressure: Excessive fuel tank pressure can make refueling difficult, as fuel may not enter the tank properly. Moreover, if the fuel tank pressure remains high for a prolonged period, it can cause the tank to deform and may also damage the fuel pump. High fuel tank pressure is a common issue, but it can generally be avoided by regularly cleaning and maintaining the fuel tank and not overfilling it during refueling.

7

1

Share

What Causes Poor Cooling Performance When the Car Has Sufficient Freon?

Reasons for poor cooling performance despite sufficient Freon in the car include: 1. Refrigerant leakage: A common cause of ineffective car air conditioning is insufficient or low refrigerant levels, often due to minor leaks. 2. Excessive refrigerant: The proportion of refrigerant in the air conditioning system must meet specific requirements. Too much refrigerant can impair heat dissipation, similarly, adding too much cooling oil during maintenance can also reduce the system's heat dissipation capacity. 3. Loose drive belt of the car air conditioning compressor: Car cooling relies on refrigerant, which is transported by the air conditioning compressor, with the drive belt being a crucial moving part. If the drive belt is loose, the compressor may slip during operation, leading to reduced transmission efficiency, slower compressor speed, and decreased refrigerant delivery, resulting in poor cooling performance.

11

3

Share

Is It Normal to Smell a Burning Odor from the Clutch Plate?

Smelling a burning odor from the clutch plate is not normal. The burnt smell from the clutch plate is usually caused by the driver holding the clutch in a semi-engaged state for too long, meaning the clutch is pressed for extended periods, leading to overheating and damage. Below are the functions of the clutch: 1. Increase driving force: Gradually enhances the car's driving force, ensuring a smooth start. 2. Separate the engine and transmission: Temporarily disconnects the engine and transmission for gear shifting. 3. Ensure proper operation of the drivetrain: Prevents drivetrain overload and ensures normal operation. 4. Extend the lifespan of transmission gears: Reduces torsional vibration shocks from the engine, prolonging the life of transmission gears.

10

3

Share

How Long Are Highways Free During Chinese New Year?

During the Spring Festival, tolls are waived for seven days, from New Year's Eve to the sixth day of the lunar new year. Here are some important notes for driving on highways: Do not occupy the emergency lane: Occupying the emergency lane is strictly prohibited on highways. Every year during the toll-free period, various accidents occur on highways. Keeping the emergency lane clear allows rescue, firefighting, and traffic management vehicles to arrive promptly, which helps in traffic flow and can save lives in critical situations. Avoid prolonged stays at service areas: During the toll-free period, the number of vehicles on highways increases dramatically, putting pressure on service areas. Many service areas have limited space, leading to parking difficulties. Drivers are advised to minimize their stay at service areas to improve efficiency. Ensure your tank is full before departure, use the restroom, take a short break, and then continue your journey. Check your spare tire and prepare necessary tools: Historical data shows that accident rates are higher during holidays. It's recommended that drivers carry a spare tire, basic repair tools, and first aid supplies. These tools can be helpful in case of traffic jams or accidents, both for yourself and others. Always have food and drinking water in your vehicle. Drivers with the means should also consider installing a dashcam, which can serve as video evidence in case of an accident.

4

0

Share

How Many Subject 2 Driving Tests Can Be Scheduled Simultaneously?

How many painted surfaces does a car have?

What are the dimensions of a parking space?

What does high fuel tank pressure mean?

What Causes Poor Cooling Performance When the Car Has Sufficient Freon?

Is It Normal to Smell a Burning Odor from the Clutch Plate?

How Long Are Highways Free During Chinese New Year?

Which Material is More Durable for Car Covers?

What is the cooling capacity of a car air conditioner?

Is Installing a Roof Rack Illegal?

What are the symptoms of a faulty intercooler?