···
Log in / Register

How many shares of Mercedes-Benz did Geely acquire?

6Answers
MacKimberly
08/31/2025, 04:21:39 AM

Geely acquired 9.69% of Mercedes-Benz shares, becoming the largest shareholder of Daimler, the parent company of Mercedes-Benz. Information about Mercedes-Benz is as follows: Configuration: The SLK sports car, with both internal and external refinement, is equipped with a 4-cylinder 2.3-liter large turbocharged engine, with a maximum output of 193 horsepower, fuel consumption of 8.2 liters per 100 kilometers, and an acceleration time from 0-100 km/h of just 6 seconds, with a top speed of 237 km/h. The engine is also equipped with a variable valve timing device that works with an electronically controlled magnet to provide oil pressure to a chamber in the camshaft drive chain, thereby gently rotating the camshaft and changing the valve opening and closing times according to the movement of the cam and piston. To cater to the tastes of different owners. Air sensor: The latest member of the Mercedes-Benz sedan family is the world's first production sedan with an automatic air control system. Its unique "electronic nose" system uses a specialized air quality sensor, which immediately sends a signal to the system computer when pollution outside the vehicle exceeds the standard, automatically closing the recirculation damper in the ventilation system.

Was this review help?
104
Share
OGemma
09/13/2025, 12:32:42 AM

Geely acquired approximately 9.69% of Daimler's (parent company of Mercedes-Benz) shares in early 2018. This transaction made Geely one of the major shareholders of Daimler and promoted cooperation between the two parties in the direction of electric vehicle technology. I remember it caused quite a stir in the industry at that time, as Geely had previously acquired Volvo, demonstrating the strategic ambition of Chinese automakers to globalize. Now, seeing the possibility of the Mercedes EQC and Geely Geometry sharing a platform, this cooperation not only enhances brand image but may also influence the development of new energy vehicles in the future. As a user, paying attention to these backgrounds when choosing a car model can be quite useful.

Was this review help?
13
Share
Expand All
LaCollin
10/27/2025, 01:18:07 AM

Did you know that Geely's share acquisition was 9.69%, which happened back in 2018? I often talk about this while driving, and it still feels quite surprising. Daimler is responsible for the Mercedes-Benz brand, and after Geely's investment, it helped expand international influence while enabling deeper collaboration in autonomous driving and hybrid technologies. Some concepts used in cars like the Geely Xingrui L might originate from this partnership, offering consumers more reliable choices. Next time you're getting your car serviced, remember to discuss the collaboration progress with the technician—you might just learn something new.

Was this review help?
15
Share
Expand All
MacSarah
12/10/2025, 12:33:56 AM

In 2018, Geely acquired approximately 9.69% of Daimler's shares, becoming a major shareholder. This transaction accelerated the integration of both parties in the electric vehicle sector, with some technologies from Mercedes-Benz's EQ series potentially being shared with Geely's brands. For automotive enthusiasts, such synergies drive innovation and make more high-performance models affordable, making the follow-up developments worth watching.

Was this review help?
14
Share
Expand All
JosephLee
01/30/2026, 01:45:03 AM

Looking back to 2018 when Geely acquired a 9.69% stake in Daimler, it sparked widespread discussion. At that time, Chinese brands were just beginning their globalization journey, and this investment symbolized enhanced capabilities, facilitating collaboration on advanced technologies like autonomous driving. At our community car enthusiast gatherings, we discussed its potential impact on reducing electric vehicle costs—certainly worth long-term observation.

Was this review help?
7
Share
Expand All
MaryMarie
04/25/2026, 12:50:58 PM

Geely acquired a 9.69% stake in Daimler around 2018. I think this is quite meaningful for ordinary car owners because the cooperation can bring about technology sharing. For example, the Geely Geometry A might draw inspiration from Mercedes-Benz's energy efficiency design. Paying attention to these backgrounds during daily car use can help make more informed car purchasing decisions, ensuring a balance between safety and performance.

Was this review help?
20
Share
Expand All
More Q&A

can you use us car seats in australia

No, you cannot safely use a US-certified car seat in Australia. The two countries have entirely different and incompatible child restraint standards. US seats meet Federal Motor Vehicle Safety Standard (FMVSS) 213, while Australian law requires seats to comply with the Australian/New Zealand Standard AS/NZS 1754. Using a non-compliant seat is illegal and, more importantly, compromises your child's safety due to design differences in the seats and the vehicles themselves. The core issue is the anchoring system. Australian cars are equipped with ISOFIX or the top-tether anchor points mandated by AS/NZS 1754. US seats primarily use the LATCH system (Lower Anchors and Tethers for Children), which, while similar to ISOFIX, is not tested or certified to the same dynamic crash standards. Australian seats are designed with a robust top-tether strap that is a critical component of their safety, especially in forward-facing seats, to reduce head movement in a crash. Beyond legality, it's a significant safety risk. The standards govern how a seat performs in a crash, and the testing protocols differ. A seat designed for one standard may not perform correctly under the conditions of another. Furthermore, local authorities, including rental car companies, will not allow a non-compliant seat to be fitted. Your best and safest options are to rent a seat from your Australian car rental company, purchase a new AS/NZS 1754-compliant seat upon arrival, or bring your own seat only if it is also explicitly certified to the Australian standard (which is rare for US-market seats). Feature US Standard (FMVSS 213) Australian Standard (AS/NZS 1754) Primary Restraint System LATCH or Seat Belt ISOFIX with Top Tether or Seat Belt with Top Tether Top Tether Use Optional for some seats, often for forward-facing Mandatory for all forward-facing and some rear-facing seats Legal Compliance Illegal to use in Australia Required by law in Australia Crash Testing Tested to US-specific dynamic crash pulses Tested to different, often more severe, dynamic crash pulses Side-Impact Protection Not federally required (though many manufacturers include it) Mandatory requirement within the standard Labeling Must display FMVSS 213 compliance label Must display AS/NZS 1754 compliance label ("Red Tick" mark)
120
Share

can you use sae 30 motor oil in a car

Using SAE 30 motor oil in a modern car is generally not recommended and could potentially harm your engine. The key issue is that SAE 30 is a single-grade oil, meaning its viscosity is designed for a specific, narrow temperature range. Modern engines are engineered to use multi-grade oils (e.g., 5W-30, 0W-20) that provide proper flow at both cold startup temperatures and high operating temperatures. Using a single-grade oil like SAE 30 can lead to poor lubrication during cold starts, increased engine wear, reduced fuel economy, and potentially trigger the check engine light. The correct oil for your vehicle is specified by the manufacturer to ensure optimal performance and longevity. This specification, which includes the viscosity grade and performance standards (like API SN Plus or SP), is found in your owner's manual. Deviating from this recommendation risks voiding your powertrain warranty. There are very limited exceptions. SAE 30 might be suitable for some older classic cars (pre-1970s) or certain small engines like those in lawnmowers, where the manufacturer specifically calls for it. However, for the vast majority of passenger vehicles from the last 30-40 years, sticking with the manufacturer-recommended multi-grade oil is the only safe choice. Scenario Recommended Oil Type Potential Risk of Using SAE 30 Modern Car (Cold Climate) 0W-20, 5W-30 High : Poor cold-start lubrication, engine damage Modern Car (Moderate Climate) 5W-30, 10W-30 High : Increased wear, potential overheating Classic Car (Pre-1970s) Check Manual (SAE 30 may be correct) Low if specified by manufacturer Small Engine (Lawnmower) Often SAE 30 None if specified by manufacturer
108
Share

can you use non oxygenated gas in car

Using non-oxygenated gas in your car is generally not recommended for most modern vehicles. The key issue is that non-oxygenated fuel lacks ethanol, which is a primary oxygenate used in standard pump gasoline (like E10, which contains 10% ethanol). While it might seem "pure" and beneficial, using it in a car designed for oxygenated fuel can lead to poor performance and potential damage. The engine's computer is calibrated for a specific air-fuel mixture, and the lack of oxygenates can result in a rich condition (too much fuel, not enough air), increasing emissions and potentially fouling spark plugs and the catalytic converter over time. Non-oxygenated gas is primarily intended for small engines and classic cars without sophisticated emissions control systems. For a modern car, you should always use the octane grade recommended by your vehicle's manufacturer , as stated in the owner's manual or on the fuel door. Using the correct fuel ensures optimal performance, fuel economy, and longevity of your emissions system. Vehicle Type Recommended Fuel Potential Issue with Non-Oxygenated Gas Best Use Case for Non-Oxygenated Gas Modern Car (post-1990s) Oxygenated (e.g., E10 87/89/93 octane) Rich air-fuel mixture, increased emissions, potential damage to O2 sensors and catalytic converter Not Recommended Classic Car (pre-1980s) Non-Oxygenated (often 90+ octane) None; often beneficial as ethanol can damage rubber seals and carburetors Ideal for seasonal storage Small Engine (lawn mower, boat) Non-Oxygenated or Ethanol-Free Prevents ethanol-related issues like moisture absorption and fuel system corrosion Highly Recommended High-Performance Engine Manufacturer Specified (often 91+ octane) Risk of improper combustion and knock if octane rating is incorrect Only if specified by manufacturer The bottom line is to follow your owner's manual. The engineers who designed your car have already determined the best fuel for its specific engine and emissions hardware.
108
Share

can your car get repossessed at night

Yes, a car can absolutely be repossessed at night. Repossession laws are primarily based on the concept of "breach of the peace," rather than specific time restrictions. While some states have laws limiting repossession activities, the general rule across the U.S. is that a lender or their agent can repossess your vehicle at any hour—day or night, including weekends and holidays—as long as they can do so without creating a disturbance. This means a repo agent might prefer the cover of darkness when you're likely to be home and less alert, making the repossession quicker and less confrontational. The key legal term here is breach of the peace . This is a broad term that can include: Physically confronting you or a family member. Entering a locked garage without permission. Ignoring your direct demands to stop or leave the property. Creating a public disturbance that involves law enforcement. If a repo agent violates this rule, they may be required to stop the repossession attempt, and you could have legal recourse. However, simply taking the car from your driveway at 2 AM while you're asleep typically does not constitute a breach of peace, as there is no direct confrontation. State-Specific Repossession Time Regulations While federal law (the Uniform Commercial Code) sets the "breach of peace" standard, a handful of states have enacted more specific time restrictions. It's crucial to know your local laws. State Time Restrictions on Repossession Notes California Prohibited between 9 PM and 6 AM. A clear statutory restriction. Florida Prohibited between 8:30 PM and 5:30 AM. Specific time windows are defined by law. Texas No specific time restrictions. Governed by the general "breach of peace" rule. New York No specific time restrictions. Governed by the general "breach of peace" rule. Illinois Prohibited between 9 PM and 6 AM, or at any time on Sundays. One of the stricter state laws. If your car is repossessed, the lender is generally not required to give you advance notice. Your best course of action is to communicate with your lender proactively if you anticipate a missed payment, as many are willing to work out a temporary payment plan to avoid the cost and hassle of repossession.
110
Share

can you use ramps for back a car onto

Yes, you can use ramps for backing a car onto them, but it is generally not recommended due to significant safety risks and practical difficulties. The primary purpose of car ramps is for front-end loading to perform tasks like oil changes. Backing onto ramps is inherently unstable because you cannot see the ramp placement accurately, and the vehicle's rear tires can easily dislodge or "walk" the ramps out of position. This can lead to the car falling off the ramps, causing severe damage to the vehicle and posing a serious injury risk to anyone underneath. The main challenge is alignment and stability. When driving forward, you can carefully guide the tires onto the center of the ramp. When reversing, you're relying on mirrors or a spotter, which is far less precise. The geometry of the rear tires hitting the ramp often pushes it forward instead of climbing it. For this task, jack stands used in conjunction with a quality floor jack are a much safer and more reliable method for lifting the rear of a vehicle. If you must attempt this, the process requires extreme caution: Use a Spotter: An assistant outside the vehicle is essential to guide you and confirm the ramps are secure. Chock the Wheels: Place wheel chocks firmly against the front tires that will remain on the ground. Secure the Ramps: Use the provided lip or a secondary method (like a small block) to prevent the ramps from sliding. Slow and Steady: Approach at an extremely slow, crawling pace. Stop immediately if you feel the ramp move. The following table compares the two primary methods for lifting a car's rear end, highlighting why ramps are not the ideal tool for this job. Feature Backing onto Ramps Using a Floor Jack & Jack Stands Primary Risk Ramps can slip; vehicle can fall. Improper placement can cause collapse. Visibility Poor; reliant on mirrors/spotter. Good; direct visibility of jack points. Stability Low; rear tires can displace ramps. High; when properly placed on stands. Ease of Alignment Difficult and imprecise. More controlled and precise. Recommended Use Not recommended. The standard, safe procedure. Ultimately, while physically possible, the risks far outweigh the convenience. Investing in a good floor jack and a set of jack stands is the correct and safe way to work under your car's rear end.
116
Share

can.autozone clear codes on a new car

Yes, you can use an OBD2 scanner from a place like AutoZone to clear diagnostic trouble codes (DTCs) on a new car, but it's generally not recommended. Clearing the codes erases the car's computer memory, including readiness monitors needed for emissions testing, and simply removes the warning light without fixing the underlying problem. On a new vehicle, this action can potentially void aspects of your warranty if it's linked to an unrepaired issue. When a check engine light appears, the powertrain control module (PCM) stores a specific code. AutoZone employees will typically plug in a scanner to read these codes for free. While they can clear them, this is akin to dismissing a "Check Engine" alert on your phone without reading the message. The light will stay off temporarily, but if the problem persists, the code and light will return. The most significant risk for a new car is interfering with the manufacturer's warranty. If a recurring problem leads to a major failure, the dealership's service department can see if codes have been recently cleared. If you cleared a code related to, say, a misfire and then the engine fails, the manufacturer might deny the warranty claim, arguing you ignored a clear warning sign. The correct procedure is to read the codes first . Use the code as a starting point for diagnosis. For example, a P0420 code indicates a potential catalytic converter issue. On a new car, this should be addressed by the dealership under warranty. Having the code stored provides the technician with crucial evidence. Common Code Description Likely Cause Recommended Action for New Car P0301 Cylinder 1 Misfire Faulty spark plug, coil, or fuel injector Dealer service immediately P0455 EVAP System Large Leak Loose or faulty gas cap Tighten cap, clear code, see if it returns P0420 Catalyst System Efficiency Failing catalytic converter Dealer service under warranty P0128 Coolant Thermostat Thermostat stuck open Dealer service for replacement U0100 Lost Communication Network communication error Dealer diagnosis required Instead of clearing the code, take a picture of the code screen with your phone and schedule a service appointment. This provides the technician with a direct clue, leading to a faster and potentially warranty-covered repair.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.