How many series does Johnson Window Film have?

1 Answers
ReidDella
07/30/25 12:29am
Johnson Window Film is divided into three series: Johnson Insight Series, Domain Series, and LinkedIn Series. The differences between these films are not significant, except that the LinkedIn Series is a ceramic film, which is the high-end product of Johnson Window Film in the U.S., with higher light transmittance than the other two series. Spectral Selection: U.S. Johnson Window Film uses magnetron sputtering coating technology to deposit rare metals and compounds on the substrate, which has strong control over sunlight. No Signal Interference: Utilizing the global patented technology—TiN magnetron sputtering, an IR ceramic heat-insulating film has been developed that does not cause signal shielding, eliminating the issue of traditional metal films interfering with mobile phone and GPS wireless signals. Fast-Drying Adhesive: U.S. Johnson Window Film has developed DPS fast-drying pressure-sensitive adhesive based on traditional PS adhesive, adding rapid-curing components to reduce drying time to 3 hours, allowing car windows to be rolled down easily after 3 hours of film application. Anti-Reflection: U.S. Johnson Window Film deposits a dense nano-carbon layer on the surface of the metal film coating, creating a composite film that maintains the high heat-insulating performance of metal films while also achieving the low visible light reflectivity of non-metal films.
Was this review help?
5
0
Share
More Forum Discussions

How to Read the Tire Pressure Gauge in a Car?

Automotive tire pressure gauges display the pressure in the inner black circle in BAR (indicating atmospheric pressure) or Pa (Pascal). Below is an introduction to tire pressure gauges: 1. Function of tire pressure gauges: A tire pressure gauge or automotive tire pressure gauge is a special type of pressure gauge designed specifically for measuring the pressure inside the tires of cars, trucks, bicycles, and other vehicles. Tire pressure gauges utilize pressure sensing technology, offering high measurement accuracy and a long service life. 2. Classification of tire pressure gauges: Pointer-type pressure gauges, where the elastic sensitive element inside the gauge undergoes elastic deformation under pressure, and the mechanical transmission amplification mechanism rotates the pointer to indicate the pressure value on the dial. The gauge also includes a zero-return device inside, which can keep the pointer at the indicated pressure value. Scale-type pressure gauges, where a piston with a scale moves under pressure and remains stable at a certain position, indicating the pressure value through the distance moved by the scale and the scale's markings.
20
3
Share

How Long Can You Drive After the Fuel Tank Light Comes On?

There is no uniform standard for how long you can drive after the fuel tank light comes on, as different car models and fuel consumption rates determine the remaining range. According to the theoretical values in the car's manual, it is generally 40-50 kilometers. Below are the factors that determine the remaining range: 1. Actual driving conditions differ significantly from theoretical values. The remaining range in kilometers depends on road conditions, driving habits, and other factors. A full tank of fuel generally supports driving approximately 600 kilometers and will not be less than 500 kilometers. 2. The nominal capacity is usually less than the actual capacity. Based on fuel safety regulations, national standards stipulate that the nominal capacity of a car's fuel tank is 95% of the rated capacity. Therefore, when the tank is full, it can hold about 10% more fuel than the nominal capacity.
4
0
Share

What is the actual fuel consumption of the RX3?

The official combined fuel consumption of the Roewe RX3 models currently on sale is 5.9~6.6L/100KM. Actual fuel consumption may vary depending on individual driving habits and road conditions. Here is some related information: 1. Roewe: Roewe is an automobile brand under Shanghai Automotive Industry Corporation (Group), launched in October 2006. The technology for this brand's vehicles originates from Rover, which was previously acquired by SAIC, but SAIC did not acquire the 'Rover' brand. 2. Product Positioning: The 'Roewe' products are positioned as mid-to-high-end models in various segment markets, targeting consumers who are knowledgeable, cultivated, successful in their careers, innovative, proactive, and pursuing a tasteful lifestyle.
13
5
Share

How to Turn on High Beam in Sylphy?

The method to turn on high beam in Sylphy is as follows: 1. Hold the leftmost end of the light control lever located on the left side of the steering wheel; 2. Rotate it forward (toward the front of the vehicle) - one rotation sets it to AUTO mode; 3. Rotate once more to turn on parking lights, and another rotation activates low beam; 4. Push the entire light control lever forward to turn on high beam, and pull it back to turn off high beam. Additional information about vehicle high beams: 1. High beams adjust light intensity based on filament distance. The focused parallel light from high beams provides concentrated illumination with high brightness, capable of reaching distant and elevated objects. 2. Low beams operate beyond the focal point (1-2 times focal length), emitting divergent light that illuminates a wider range of nearby objects.
9
2
Share

What is the tire pressure?

Standard tire pressure is 2.3-2.5 bar, reinforced tire pressure is 2.8-2.9 bar, and the maximum tire pressure should not exceed 3.5 bar. Below is an introduction to the relevant content: 1. Tire damage: The standard tire pressure is generally 2.4-2.5 bar. If the tire pressure is too low, the contact area between the tire and the ground will be larger during driving, causing the internal temperature of the tire to rise, which can easily damage the tire. If the tire pressure is too high, encountering bumps or poor road conditions can easily lead to the danger of a tire blowout. 2. Composition: The tire is one of the most important components of a car. Its main functions include supporting the entire weight of the vehicle, bearing the load of the car, and transmitting forces and moments in other directions; transferring traction and braking torque to ensure good adhesion between the wheel and the road surface, thereby improving the car's power, braking, and passability; working together with the car suspension to mitigate the impact received during driving and dampen the resulting vibrations.
19
1
Share

How to Distinguish Between a Good and Bad Charcoal Canister Solenoid Valve?

There are several methods to determine whether a charcoal canister solenoid valve is functioning properly: 1. Unplug the solenoid valve's connector. If the suction stops, it indicates the solenoid valve is working correctly. If suction continues, the valve is stuck in the open position. 2. Start the engine and let it idle. Remove the pipe connected to the fuel tank. You should feel suction at the canister's connector at a frequency of about two to three times per second. If there is no suction, the valve is stuck in the closed position. 3. The charcoal canister solenoid valve is a device installed in vehicles to reduce air pollution caused by fuel vapor emissions and improve fuel efficiency. When the car starts, the solenoid valve opens, releasing adsorbed fuel vapor into the intake manifold for combustion in the engine.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.