How many seconds does the Yixuan Max take to accelerate from 0 to 100 km/h?

Does the RX5 have tire pressure monitoring?

RX5 is equipped with tire pressure monitoring, the functions of which are: 1. Preventing accidents; 2. Extending the service life of tires; 3. Reducing wear on the suspension system. The RX5 is a compact SUV under SAIC Roewe, powered by a 1.5T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 169 PS, a maximum torque of 250 Nm, and a maximum power of 124 kW. The RX5's body dimensions are: length 4556 mm, width 1855 mm, height 1719 mm, with a wheelbase of 2700 mm, a minimum ground clearance of 175 mm, and a curb weight of 1592 kg.

8

3

Share

How to Remove Adhesive from Car Glass?

Methods to remove adhesive from car glass include: 1. Use banana oil, apply it to the adhesive area, then wipe with a towel; 2. Tear off any non-adhesive items on the surface, apply hand cream, and slowly rub with your thumb; 3. Use a paper towel soaked in alcohol to wipe; 4. Use nail polish remover to wipe; 5. Use acetone to wipe. The functions of car glass are: 1. Enhance visibility to promptly understand external conditions; 2. Block wind, rain, and dirt; 3. Protect the safety of passengers inside the car. Car glass is categorized by location into: windshield, side windows, rear windshield, and sunroof glass.

20

1

Share

Is Engine Oil the Same as Transmission Fluid?

Engine oil and transmission fluid are not the same. The difference between them lies in their functions: engine oil is the lubricant for the engine system, possessing certain properties such as oxidation resistance, wear resistance, and corrosion prevention. Transmission fluid, on the other hand, is primarily used to keep the gear system clean, ensuring the transmission operates properly and extending the lifespan of the transmission components. The method for changing transmission fluid is as follows: 1. Start the engine to preheat the transmission to operating temperature; 2. Remove the drain plug; 3. After draining the old fluid, reinstall the plug; 4. Add new transmission fluid; 5. Start the engine, shift from P to N, D, L1, and L2 repeatedly, staying in each gear for at least 5 seconds; 6. Check if the automatic transmission fluid level is normal.

7

5

Share

In which year did the China IV emission standard engines begin?

China IV emission standard engines were introduced in 2011. The main pollutants from vehicle emissions include HC, NOx, CO, PM, etc. Through the application of technologies such as improved catalytic converter active layers, secondary air injection, and exhaust gas recirculation systems with cooling devices, these pollutants are controlled and reduced to levels below specified standards. The update of emission standards is driven by the increasing number of vehicles on the road, which emit harmful gases such as carbon monoxide and hydrocarbons. The emission standards set limits on the discharge of these gases. China's emission standards are primarily based on EU standards, with some adaptive modifications made to suit local conditions.

7

0

Share

Is Gear Oil the Same as Engine Oil?

Gear oil is not engine oil. It primarily refers to the lubricating oil used in transmissions and rear axles. The functions of gear oil include: 1. It is used in various gear transmission devices to prevent gear surface wear, scuffing, and sintering, thereby extending their service life and improving power transmission efficiency; 2. Gear oil should have excellent anti-wear and load-bearing properties, as well as appropriate viscosity; 3. It should possess good thermal oxidation stability, anti-foaming properties, water separation performance, and rust prevention. The hazards of not changing gear oil for a long time: 1. Gear oil working under high-speed and high-temperature conditions for extended periods can deteriorate and volatilize, exacerbating the wear of mechanical components and, in severe cases, damaging internal transmission parts; 2. If gear oil is not replaced for a long time, the vehicle may experience weak starts when cold.

15

3

Share

Steps for Replacing a Car Headlight Cover

Steps for replacing a car headlight cover: 1. The headlight assembly is secured with clips or screws. Remove the clips or unscrew the fasteners to detach the headlight, taking care to protect the wiring harness on the headlight during removal. 2. Use a heat gun to warm the area around the cover to soften the adhesive, then gently pry off the cover. If a heat gun is unavailable, a high-power hair dryer or immersion in hot water can serve as alternatives. 3. After removing the old cover, clean the adhesive residue from the groove, apply new sealant, and press the new cover firmly into place. 4. Once the sealant has dried, reinstall the headlight assembly. It is crucial to replace a cracked headlight cover promptly. Failure to do so can compromise the headlight's seal, leading to internal condensation that impairs lighting performance. In rainy conditions, water ingress may even cause electrical short circuits.

10

3

Share

How many seconds does the Yixuan Max take to accelerate from 0 to 100 km/h?

Does the RX5 have tire pressure monitoring?

How to Remove Adhesive from Car Glass?

Is Engine Oil the Same as Transmission Fluid?

In which year did the China IV emission standard engines begin?

Is Gear Oil the Same as Engine Oil?

Steps for Replacing a Car Headlight Cover

What is the working principle of a one-way clutch?

What type of transmission does the Subaru Forester use?

What are the methods to check if a car is burning oil?

What is the standard tire pressure for the X-Trail?