How many seconds does the VOGE 300AC take to reach 100 km/h?

1 Answers
Gatsby
07/29/25 2:43pm
The VOGE 300AC accelerates from 0 to 100 km/h in 8 seconds, with a combined fuel consumption of 3.5L per 100 km. The actual power output is relatively balanced, with the optimal power delivery occurring around 6000 RPM. Throughout the riding process, gear dragging is rarely encountered, which is largely consistent with static evaluations. Additional relevant information is as follows: Configuration: The VOGE 300AC is equipped with a single-cylinder, liquid-cooled, fuel-injected engine. Although this engine features a four-valve design, it does not aggressively maximize power output, as evidenced by its compression ratio and power tuning. Power: This engine has an actual displacement of 292ml, a compression ratio of 11:1, a maximum power output of 19.3 KW, and a maximum torque of 24.5 N.m. Its power tuning emphasizes mid-to-high RPM ranges, resulting in a broad power delivery range during actual use. The engine also has room for further enhancement, as it has not been pushed to its absolute limits.
Was this review help?
11
5
Share
More Forum Discussions

Is It Illegal to Remove the Rear Seats of a Van?

Removing the rear seats of a van is illegal. Dismantling the seats violates Article 16, Clause 1 of the Road Traffic Safety Law of the People's Republic of China, which states that no unit or individual may assemble a motor vehicle or alter its registered structure, construction, or characteristics without authorization. Removing the seats constitutes altering the registered structure and construction. The hazards of such modifications to a van are as follows: Increased risk of traffic accidents: Illegal modifications by removing seats change the vehicle's original safety technical parameters, shifting its center of gravity. This leads to various traffic violations such as overloading, significantly increasing the likelihood of traffic accidents. Higher risk of rollover during turns: After modifying a van for cargo transport, its on-road speed decreases, braking distance extends, and the risk of rollover during turns rises. This not only disrupts the normal flow of other vehicles but also reduces road traffic efficiency. There have been numerous cases in China where accidents were caused by vans modified to carry more cargo or passengers by removing seats.
20
2
Share

Are Trucks Exempt from Toll Fees on Highways?

Highway tolls for trucks are not exempt; they are calculated based on distance traveled and weight. Below is a detailed introduction to the toll fees for trucks on highways: Basic Rate: The basic rate is 0.090 yuan per ton-kilometer. Toll Standards: For legally loaded transport vehicles traveling on highways, the toll fee is determined based on the total weight of the vehicle and cargo measured at the toll station. Vehicles weighing 10 tons or less are charged at the basic rate of 0.090 yuan per ton-kilometer. For vehicles weighing between 10 and 40 tons (inclusive), the portion below 10 tons is charged at the basic rate of 0.090 yuan per ton-kilometer, while the portion above 10 tons is charged at a rate that decreases linearly from 0.090 yuan to 0.045 yuan per ton-kilometer. For vehicles weighing over 40 tons, the portion below 10 tons is charged at the basic rate of 0.090 yuan per ton-kilometer, the portion between 10 and 40 tons is charged at a rate that decreases linearly from 0.090 yuan to 0.045 yuan per ton-kilometer, and any portion exceeding 40 tons is charged at 0.045 yuan per ton-kilometer.
15
5
Share

What Causes the Reversing Camera to Not Respond When Shifting to Reverse Gear?

When the reversing camera does not respond after shifting to reverse gear, it is usually due to the head unit freezing. In this case, the head unit needs to be restarted, and then you can try shifting to reverse gear again. If the reversing camera still does not respond after restarting, it is generally caused by an engine malfunction, and professional inspection and repair at a repair shop or 4S store are required. Below are the specific details: Poor Contact in the Reversing Camera Wiring or Switch: If the connecting cable between the camera and the car display comes loose, or if the reversing camera switch is damaged, it can cause the reversing camera to not display. In this case, the wiring needs to be reconnected, and if necessary, a new switch can be replaced. Reversing Camera Module Malfunction: There are many reasons for the reversing camera module to malfunction, including system disorder, module corruption, or formatting of the reversing camera. In this case, professional inspection at a repair shop is required. Car Battery Depleted: The display of the car reversing camera relies on the car battery for power. When the car battery is depleted, the reversing camera will not display. In this case, the car battery needs to be recharged promptly.
3
4
Share

What to Do When the Car Navigation Screen Doesn't Light Up?

Press and hold the power button to restart and see if it returns to normal. Otherwise, the most likely cause is poor contact in the wiring or aging power signal lines. Precautions for purchasing a car navigation system are as follows: Check the accuracy of the system: Choose one or two familiar road sections or a newly opened hotel to see if the system can accurately display the car's location. Since streets and road sections are constantly changing, the system must also provide regular update services. Consider the storage capacity of the system: In the United States, storing maps of the entire country requires at least three CDs. Therefore, the car navigation system must also have a correspondingly large hard drive memory.
3
3
Share

How to Perform Throttle Body Adaptation After Cleaning?

After cleaning the throttle body, the adaptation methods include using a diagnostic tool for idle speed learning and manual learning. Below are detailed introductions to both methods: Diagnostic Tool Learning: Perform idle speed learning using a diagnostic tool. Manual Learning: After cleaning the throttle body, it is recommended to use a diagnostic tool for adaptation. Manual operation requires certain time and experience to master for successful execution. It is advisable to visit a repair shop to use a diagnostic tool for idle speed matching, which ensures proper ignition timing and corrects the engine's basic idle speed, guaranteeing stable idle speed during vehicle operation and good fuel economy. The throttle body is a controllable valve that regulates air intake into the engine. The air mixes with gasoline in the intake manifold to form a combustible mixture, which then burns to generate power.
8
1
Share

How to Deal with the Adhesive Residue After Removing Car Window Tint Film?

Methods for dealing with adhesive residue left after removing car window tint film include using solvents or alcohol, a hairdryer, cotton or cloth soaked in vinegar, or a cloth dipped in ethyl acetate. Specific details are as follows: Using solvents or alcohol: Use organic solvents or industrial alcohol, or high-concentration alcohol to wipe the adhesive on the glass. Note that you should use a cloth dipped in the solution and avoid direct contact with water. Using a hairdryer: Use a hairdryer to soften the adhesive on the glass. Once the adhesive weakens, it can be removed more easily. If there are still minor traces, use nail polish remover to wipe them off. Using cotton or cloth soaked in vinegar: Soak cotton or cloth in vinegar and apply it to the adhesive on the glass, covering the entire area where the adhesive residue is present. Once the adhesive is thoroughly soaked, you can slowly and carefully remove it bit by bit. Using a cloth dipped in ethyl acetate: Gently wipe, and the adhesive will come off immediately. Quickly wipe a few more times with a clean cloth. Carefully scrape off any remaining adhesive, then use nail polish remover or hot water to wipe, and it will be completely removed.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.