How many seconds does the Prado take to accelerate from 0 to 100 km/h?

What are the test items for the automatic transmission vehicle in Subject 2?

The C2 Subject 2 test consists of 4 items: reverse parking, parallel parking, curve driving, and right-angle turning. Compared to the C1 manual transmission test, it excludes the hill start item. According to Article 25 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" (Ministry of Public Security Order No. 123), starting from June 1, 2021, the C2 and C5 Subject 2 tests no longer assess hill parking and starting. Reverse parking is one of the more challenging items in the Subject 2 test, so many test centers have designated it as the first test item. The key points for reverse parking are: the full-lock steering wheel point, the 30 cm correction point, and the parking point inside the bay. You must follow the specified route and sequence. The vehicle must be parked inside the bay without crossing the lines. Parallel parking focuses on aligning the front line of the parking space with the rear wheels, spotting the rear corner in the rearview mirror, and maintaining the distance between the wheels and the left dashed line. After parking, the wheels do not need to be straightened, and don’t forget to use the turn signal when exiting. The vehicle body must not cross the lines after parking, and the tires must not touch the lane boundary lines during movement. Curve driving, commonly known as the S-curve, is relatively easy for many students with good driving sense, who can complete it intuitively. However, some students misjudge the line positions during the actual test, leading to immediate failure by crossing the lines. The key to the S-curve is observing the reference points on the front hood and the position of the boundary lines. The wheels must not press the road edge lines. Right-angle turning is even simpler, essentially a simplified version of the exit part in reverse parking. The method for finding the reference point is the same as exiting the bay, based on the relationship between the horizontal line of the front hood and the front line (just touching or slightly delayed). Ensure the wheels do not press the road edge lines. Generally, the required training hours for C1 Subject 2 are 16 hours, while for C2 Subject 2, it’s 14 hours. Completing the required hours is a basic requirement for taking the Subject 2 test. Training hours can only be increased, not reduced, and additional test items require corresponding extra hours. Each training hour is 60 minutes, with effective teaching time not less than 45 minutes. If you fail Subject 2, you can retake it once. If you fail the retest, the current test session ends, and you must reschedule the test after 10 days. If you fail five consecutive test attempts (including retests, totaling 10 attempts), all previously passed subject scores will be invalidated, and you must restart from Subject 1.

15

1

Share

Does the Elysion have a hybrid version?

The Elysion does have a hybrid version. Taking the Elysion 2019 2.0L Hybrid Comfort Edition as an example: it is an MPV launched by Dongfeng Honda, with dimensions of 4950mm in length, 1842mm in width, and 1711mm in height, and a wheelbase of 2900mm. It is equipped with a 2.0L naturally aspirated engine, with a maximum power output of 107kW, paired with an E-CVT continuously variable transmission. The vehicle features front-wheel drive, with a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension. It utilizes electric power steering and has a unibody construction. The front brakes are ventilated disc type.

9

4

Share

What are the symptoms of a bad CV joint?

Symptoms of a bad CV joint include regular abnormal noises during normal steering or when driving over bumps. In severe cases, it may lead to loss of power and deviation from the intended driving direction. The CV joint is located in the car's chassis, connecting the driveshaft to the wheels, and its key role is to transmit power to the wheels. Below are some maintenance methods for CV joints: 1. Avoid starting in high gear; 2. Avoid abruptly engaging or disengaging the clutch; 3. Avoid overloading and speeding; 4. Regularly check the connection points of the CV joint for any abnormalities and ensure the dust cover is intact.

14

2

Share

How to Deal with Black Paint Scratches on a White Car?

When black paint gets scratched onto a white car, the specific situation and solutions are as follows: 1. Dirt adhesion: If the black marks are merely dirt adhering to the paint surface, simply washing and wiping them off will suffice. 2. Exposed primer: If the scratch has removed the surface paint of the car, in minor cases, you can use a touch-up pen to repair it yourself. For more severe cases, sandpaper can be used to sand off the paint at the scratched area, followed by repainting. 3. Deformation: If the impact is particularly severe and causes deformation of vehicle parts, it is necessary to visit a 4S shop or repair shop for professional repair by specialists.

15

0

Share

What Causes the Anti-Slip Warning Light to Illuminate?

Main reasons for the anti-slip light illumination: 1. Accidental pressing of the ESP OFF button, manually deactivating the anti-slip system. 2. Software issues causing poor signal transmission. 3. Fuse blown or circuit short. 4. Poor contact or malfunction at sensor interfaces. 5. ABS pump failure. There are two methods to clear the anti-slip light: 1. Restart the engine and briefly press the ESP OFF button to check if the anti-slip system was manually deactivated. 2. Visit a 4S dealership for inspection, diagnose the fault cause, and use a diagnostic scanner to clear the trouble codes after repair.

19

4

Share

How to open the fuel tank cap of Buick GL8?

Buick GL8's fuel tank switch is located under the driver's seat in the main cockpit. Simply pull the switch outward by hand to open the fuel tank cap. More information about Buick GL8 is as follows: 1. Buick GL8 is positioned as a medium-sized MPV, and all models meet the China VI B emission standards. 2. In terms of power, Buick GL8 is equipped with a 2.0-liter inline 4-cylinder turbocharged engine, matched with a 6-speed automatic manual transmission, with a maximum power of 191KW and a maximum torque of 350N·m. The fuel supply method is all direct injection.

6

4

Share

How many seconds does the Prado take to accelerate from 0 to 100 km/h?

What are the test items for the automatic transmission vehicle in Subject 2?

Does the Elysion have a hybrid version?

What are the symptoms of a bad CV joint?

How to Deal with Black Paint Scratches on a White Car?

What Causes the Anti-Slip Warning Light to Illuminate?

How to open the fuel tank cap of Buick GL8?

Where is the chassis number of the Elysion located?

How to Properly Use a Turbocharged Engine?

How should a novice who just got a driver's license practice driving?

Should the Changan Eado use 92 or 95 octane gasoline?