···
Log in / Register

How many seconds does the MG 5 take to accelerate from 0 to 100 km/h?

4 Answers
LeJesse
07/28/25 7:18pm
MG 5 comes in two models: 1.5T and 1.5L. The 1.5T model accelerates from 0 to 100 km/h in 7.9 seconds, while the 1.5L model takes around 9 seconds. Here are the details about the MG 5: 1. The MG 5 is a compact sedan under the MG brand, with dimensions of 4675 mm in length, 1842 mm in width, and 1473 mm in height, and a wheelbase of 2680 mm. 2. The MG 5 is equipped with two engines: a 1.5-liter turbocharged engine and a 1.5-liter naturally aspirated engine. The 1.5-liter turbocharged engine delivers 173 horsepower and a maximum torque of 275 Nm, with the maximum power achieved at 5600 rpm and the maximum torque available from 1750 to 4000 rpm. The 1.5-liter naturally aspirated engine produces 120 horsepower and a maximum torque of 150 Nm, with the maximum power achieved at 6000 rpm and the maximum torque available at 4500 rpm.
Was this review help?
20
1
Share
AdrianaRose
08/11/25 11:10pm
I've driven the MG5 with the 1.5T turbocharged engine, and its 0-100 km/h acceleration time is around 8.5 seconds. The engine responds quickly at startup, delivering noticeable acceleration push, making overtaking in the city or accelerating on the highway smooth and effortless. Tire grip and body weight can affect actual performance—for instance, fitting better tires enhances stability. A friend of mine often drives the manual transmission version, where the acceleration time can be reduced to just over 8 seconds, showing that transmission choice also plays a role. Overall, the MG5 offers balanced power performance in its price range, sufficient for daily commuting while being fuel-efficient. The 1.5L naturally aspirated version is a bit slower, with acceleration around 9.5 seconds, but it's perfectly fine for family use. With proper maintenance, the performance can last longer.
Was this review help?
17
3
Share
Expand All
VanGideon
09/30/25 5:18am
The MG5 typically accelerates from 0 to 100 km/h in 8 to 9 seconds, depending on the specific configuration. I've researched its engine performance: the 1.5T version delivers strong torque, enabling a 0-100 km/h sprint in around 8.5 seconds, thanks to its well-tuned powertrain. In contrast, the naturally aspirated engine might be slightly slower but offers smoother operation. External factors like body lightweighting and aerodynamics can also affect acceleration times. During my previous tests, I noticed that lower wind resistance at high speeds improves acceleration performance. These figures place the MG5 in the upper-middle range among its peers—for instance, some Civic variants are quicker, but the MG5 excels in cost efficiency. In daily driving, acceleration times are crucial for safely merging into traffic. I recommend opting for tire upgrades to enhance responsiveness.
Was this review help?
11
1
Share
Expand All
SanRafael
11/13/25 7:10am
The MG5 accelerates to 100 km/h in around 8.5 seconds, which is quite realistic. I think it's sufficient for daily driving, making lane changes or accelerating through turns during commutes effortless. Factors influencing this include the engine type, with the 1.5T being quicker. Road conditions and tire pressure are also important, as smooth roads provide faster response. Maintaining the vehicle well, such as regular oil changes, helps keep performance stable.
Was this review help?
6
0
Share
Expand All
More Forum Discussions

How many engine models does the Audi Q5L have?

The Audi Q5L has only one engine model, which is the EA888 2.0T. There are 5 methods for car engine maintenance: 1. Clean the air filter: If the air filter is clogged or accumulates too much dust, it can cause poor engine intake. A large amount of dust entering the cylinder will accelerate carbon buildup, leading to poor engine ignition, insufficient power, and increased fuel consumption. 2. Remove throttle valve sludge: This is caused by carbon deposits from fuel combustion exhaust at the throttle valve and residues of impurities not filtered by the air filter. 3. Clean injector carbon deposits: The combustion chamber is prone to carbon buildup, which can also cause difficulty in starting. Carbon deposits in the injector can block the fuel passage, distort fuel injection, and impair atomization, leading to increased fuel consumption. 4. Regularly clean the fuel system: During the combustion process in the combustion chamber, gum and carbon deposits form and accumulate in the fuel passages, carburetor, injector, and combustion chamber, interfering with fuel flow, disrupting the normal air-fuel ratio, and causing poor fuel atomization, which can lead to engine stuttering and other faults. 5. Choose the appropriate quality grade of engine oil: Based on the working principles and usage conditions of the intake and exhaust systems, select the suitable engine oil.
9
2
Share

How to Reset the Tesla Tire Pressure Light?

Tesla tire pressure light reset steps: Turn the ignition switch to the second gear, and the instrument panel will display the total mileage/trip mileage interface. Press the "OK" button on the left side of the steering wheel, then press the right button to enter the "Maintenance" interface. Press the down arrow button on the steering wheel to enter the "Tire Pressure" interface. The instrument panel will prompt "Run-Flat Indicator Activated," press the "OK" button on the steering wheel to confirm. The instrument panel will prompt "Is the tire pressure normal?" Use the down button on the steering wheel to select "Yes" and press "OK" to confirm. What to do if the tire pressure is insufficient: If there is no visible damage to the car's tires, you can simply inflate them to the normal tire pressure and then reset the tire pressure system. If a puncture is found during inspection, drive to a car repair shop promptly to have the tire repaired, then reinflate it. If the tire pressure warning appears again after inflation but there is no puncture, it may be due to air leakage caused by a deformed wheel rim. It is recommended to check the wheel rim and replace it if necessary. The working principle of the tire pressure monitoring system is: It uses pressure sensors installed inside the tires to measure the tire pressure and wireless transmitters to send the pressure information from inside the tire to a central receiver module.
17
0
Share

What is the reason for poor navigation sound quality after replacing the large screen?

Poor navigation sound quality after replacing the large screen is due to the weak sound processing system of the large screen navigation. The following are the drawbacks of installing a large screen navigation: 1. Matching and visual aspects: Although the functions of third-party central control screens are relatively comprehensive, the matching degree is definitely not as good as the original central control screen, and it may appear a bit abrupt and uncoordinated visually. 2. Installation process: The installation involves relatively complex wiring. If the central control screen is installed unprofessionally or incorrectly, it may cause screen malfunctions or even burn out components in the car, posing certain safety hazards. Therefore, it is essential to have it installed at a regular auto repair shop.
6
4
Share

What is the situation when there is water under the driver's seat?

The reasons for water under the driver's seat are as follows: 1. Sunroof leakage due to poor sealing, check the sunroof. 2. Water from car washing that was not cleaned properly. 3. Corrosion and leakage of the interior heater core. Extended content handling methods: 1. Go to a car cleaning shop, remove the floor mats, and use a vacuum cleaner to remove most of the water. 2. Whether it's loop mats, leather mats, rubber mats, or full TPE mats, use dry towels alternately under the mats to absorb water until they are clean. Otherwise, they may smell or mold, affecting driving. 3. Use high-pressure air at a repair shop to blow through the pipes to clear them.
7
0
Share

Why Are Japanese Car Paints Generally Thin?

The reason why Japanese car paints are thin is to maintain the smoothness of the car surface. Below is relevant information about car paint: 1. Function of car paint: The primary role of car paint is to protect the car's surface from corrosion, enhance the car's aesthetic appeal, and prolong its service life. 2. Performance aspects: Car paint must meet high-performance requirements, including excellent mechanical properties and gloss, as well as outstanding scratch resistance and wear resistance. 3. Paint material: Car paint is typically a baked finish, processed through multiple layers and dried at temperatures as high as 200 degrees Celsius to achieve stable properties, forming a durable oil film on the car body to protect it.
15
5
Share

Can Aisin 6AT Run for 500,000 Kilometers?

Aisin 6AT cannot run for 500,000 kilometers. Here are the relevant details: 1. Lifespan: With proper maintenance, the Aisin 6AT transmission has a lifespan of approximately 200,000 kilometers. The actual lifespan may vary depending on the vehicle's usage and the owner's driving habits. While major failures are unlikely, regular inspections of components such as the clutch are necessary. 2. Technical Design: The Aisin 6AT transmission utilizes a dual planetary gear set, with an expanded lock-up range design that reduces fuel consumption during upshifts. Additionally, the fuel-saving valve employs advanced structural technology to enhance fuel combustion efficiency more effectively and rationally, whether at idle or during acceleration. Furthermore, the incorporation of a long-stroke damper in the torque converter effectively suppresses vibrations.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.