···
Log in / Register

How Many Seconds Does the Lingpai Take to Accelerate from 0 to 100 km/h?

1 Answers
JocelynLee
07/28/25 2:56pm
According to official data, the Lingpai comes with two engine displacements: 1.0T and 1.5T. The 1.0T model accelerates from 0 to 100 km/h in 8.8 seconds, while the 1.5L model takes 10 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, represents how much force is available. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. The torque of the Enjoy is 173 Nm, with a 0-100 km/h acceleration time of 11.8 seconds. The Lingpai 1.0T has a maximum torque of 173 Nm and accelerates from 0 to 100 km/h in 8.8 seconds. Transmission efficiency: The transmission is the medium for power transfer, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Lingpai 1.0T is equipped with a CVT continuously variable transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit: Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Enjoy has a power-to-weight ratio of 95.16 kg/PS, with a 0-100 km/h acceleration time of 11.8 seconds. The Lingpai 1.0T has a power-to-weight ratio of 94.94 Hp/T and accelerates from 0 to 100 km/h in 8.8 seconds.
Was this review help?
10
2
Share
More Forum Discussions

What's the reason for BMW drivetrain malfunction preventing startup?

There are many potential causes for this malfunction. In most cases, it results from damaged ignition coils or faulty spark plugs. Both spark plugs and ignition coils experience decreased ignition efficiency over time with use. Below are specific explanations of the causes: Spark plug failure: This can cause engine idling vibration, trigger faster drivetrain malfunction warnings, and illuminate the engine warning light. In such cases, replacing the spark plugs promptly is necessary to extend their service life; Clutch slippage: Manifests as difficulty starting the vehicle, poor driving performance, inadequate acceleration, and in severe cases may produce a burning smell or emit black smoke from the exhaust pipe; requires clutch disc replacement.
1
0
Share

Does the BMW 525 have remote start?

BMW 525 does not have remote start, official configuration data shows it lacks this feature. Introduction to remote start: Remote start, as the name suggests, refers to starting the engine or motor (for pure electric vehicles) remotely via a key fob. Typically, after remote starting the engine or motor, the vehicle will operate continuously for ten minutes, and will automatically shut down if no further instructions are received. How remote start works: The vehicle starts the engine or motor based on signals received from the remote key. This entire process eliminates the inconvenience of manually entering the vehicle to operate it. While the engine or motor is running, the central locking system remains engaged, providing effective security.
9
5
Share

What brand of transmission oil is used for Mercedes-Benz ML320?

Mercedes-Benz ML320 uses Fuchs transmission oil, which is the original brand from the factory. Introduction to transmission oil: Transmission oil is used in automotive transmissions to clean and lubricate the gear system, as well as extend the life of the transmission components. It has functions such as cleaning, lubrication, rust prevention, and heat dissipation. Types of transmission oil: Depending on the type of vehicle transmission, transmission oil can be divided into manual transmission oil and automatic transmission oil. Generally, automatic transmission oil needs to be replaced every two years or every 40,000 kilometers, while manual transmission oil typically requires replacement within 60,000 kilometers.
10
3
Share

What transmission is used in the 2020 GAC Trumpchi GS4?

2020 GAC Trumpchi GS4 uses two types of transmissions: a 6-speed manual transmission and a 6-speed automatic manual transmission. Transmissions are divided into two major categories: manual transmissions and automatic transmissions. The transmission is referred to as the veins of a car, as it is a crucial component that transfers the power generated by the engine to the wheels through gears, bearings, hydraulic torque converters, and other parts. The 2020 GAC Trumpchi GS4 is an SUV model produced by GAC Group, with body dimensions of 4545mm in length, 1856mm in width, and 1668mm in height, a wheelbase of 2680mm, and a minimum ground clearance of 190mm. It is equipped with a 4A15J1 turbocharged engine, paired with a 6-speed manual transmission (MT).
9
4
Share

What is the normal voltage for a BMW 5 Series?

BMW 5 Series is a 12V vehicle system. The battery voltage should be around 13 volts when unloaded, and no less than 11 volts under load is considered normal. Starting becomes difficult if the voltage falls below this level. Introduction to car batteries: The car battery is a crucial component in a vehicle. Its function is to supply power to the starter motor and provide electricity to the engine ignition system and other electrical equipment when the engine is started or running at low speed. When the engine runs at high speed, the generator produces sufficient electricity, and the onboard charger automatically stores excess electrical energy in the car battery. Precautions for starting the car: When starting the car, each attempt should not exceed 3 to 5 seconds, and the interval between subsequent attempts should be no less than 10 seconds.
18
4
Share

Is It Necessary to Press the Brake When Depressing the Clutch?

Depressing the clutch does not necessarily require pressing the brake. When decelerating or stopping at low speeds, the difference from normal deceleration and stopping is that after releasing the accelerator, you first depress the clutch pedal, then press the brake pedal to slow down and stop. For manual transmission vehicles traveling at higher speeds with higher gears, when braking is needed, press the brake pedal first. When the speed drops to around 15 km/h, then depress the clutch pedal and shift the gear lever to neutral. The purpose of braking is to decelerate and bring the vehicle to a stop. The principle behind its function is to convert the vehicle's kinetic energy into heat energy, which is then dissipated. The kinetic energy comes from the power provided by the engine, which requires fuel combustion to perform work and supply it.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.