How many seconds does the GAC Trumpchi GS8 take to accelerate from 0 to 100 km/h?

1 Answers
DelLyla
07/30/25 4:05am
According to official data, the GAC Trumpchi GS8 takes 9.85 seconds to accelerate from 0 to 100 km/h. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, represents how strong the force is. The greater the torque, the stronger the force pushing the vehicle, resulting in naturally faster acceleration. In the same class, the Volkswagen Tayron has a maximum torque of 250 Nm and a 0-100 km/h acceleration time of 9.9 seconds. The GAC Trumpchi GS8 has a torque of 400 Nm and a 0-100 km/h acceleration time of 9.85 seconds. Transmission efficiency: The transmission is the medium for power delivery, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The GAC Trumpchi GS8 is equipped with an 8-speed automatic manual transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit: Hp/T). The higher the power-to-weight ratio, the faster the acceleration. In the same class, the Volkswagen Tayron has a power-to-weight ratio of 98 Hp/T and a 0-100 km/h acceleration time of 9.9 seconds. The GAC Trumpchi GS8 has a power-to-weight ratio of 132 Hp/T and a 0-100 km/h acceleration time of 9.85 seconds.
Was this review help?
2
4
Share
More Forum Discussions

What Causes a Large Amount of Engine Oil in the Spark Plug?

Spark plugs containing a large amount of engine oil are caused by a malfunctioning forced ventilation valve in the crankshaft case, cylinder wall scoring, or severe piston ring wear leading to oil leakage. How Spark Plugs Work: Under high voltage, the air between the center electrode and the side electrode of the spark plug rapidly ionizes, forming positively charged ions and negatively charged free electrons. When the voltage between the electrodes reaches a certain level, the number of ions and electrons in the gas increases like an avalanche, causing the air to lose its insulating properties and forming a discharge channel, resulting in a "breakdown" phenomenon. At this point, the gas becomes a luminous body, known as a "spark." Along with thermal expansion, a "crackling" sound is also produced. The temperature of this electric spark can reach as high as 2000-3000°C, sufficient to ignite the air-fuel mixture in the combustion chamber. Criteria for Determining Spark Plug Damage: Damaged spark plugs can exhibit the following symptoms: difficulty starting, reduced power, excessive exhaust emissions, and increased fuel consumption.
11
0
Share

What does the removal of the car ETC tag mean?

Car ETC tag removal means the ETC card cannot be used normally. The reasons for this phenomenon include: the owner's ETC device OBU may have loosened or fallen off, the owner removed the OBU device causing the anti-tamper button on the back to pop up, or the device is faulty. In this case, the owner needs to go to the ETC business office where the service was originally processed to reactivate the ETC before it can resume normal operation. The ETC installation process is as follows: After receiving the device, first check whether the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, the red light will briefly turn on, and the OLED screen will display "Label Invalid" or "Please Insert Card", indicating the device is functioning properly. Clean the front windshield, ensuring the glass surface is smooth, clean and dry. Then peel off the OBU adhesive backing film and stick it to the installation position. Press firmly with fingers for 2-3 minutes to remove air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is properly inserted into the OBU device.
10
2
Share

What is the fuel consumption of the BMW X5?

The fuel consumption of the BMW X5 is 9.1-10L/100KM. The currently available BMW X5 models include the 2021 facelift xDrive30i M Sport Package, 2021 facelift xDrive30i X Design Package, 2022 xDrive30i M Sport Package, 2022 xDrive40i M Sport Package, and 2022 xDrive40i Premium M Sport Package. In the same class, the Audi Q7 2022 45TFSI quattro S line Sport has a combined fuel consumption of 8.8L/100KM, while the Discovery 2022 300PS S has a combined fuel consumption of 7.3L/100KM. Factors affecting vehicle fuel consumption: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before red lights can increase fuel consumption. Vehicle characteristics: Vehicles with larger engine displacements generally consume more fuel than those with smaller displacements because larger engines typically produce more power and require more gasoline for combustion. Heavier vehicles also tend to have higher fuel consumption due to the greater driving torque needed to move the additional weight.
20
0
Share

What is the front suspension type of the Volkswagen Sagitar?

The front suspension type of the Volkswagen Sagitar is a MacPherson strut independent suspension. The MacPherson strut independent suspension combines the coil spring and shock absorber into one unit, which saves space in the suspension system. This allows for more flexibility in the car's engine compartment while also reducing the weight of the suspension. Naturally, this results in reduced inertia and faster response and rebound speeds. The Volkswagen Sagitar is a car launched by FAW-Volkswagen. Since its debut, it has showcased the essence of Volkswagen's German design with its smooth lines and dynamic proportions. With its exquisite craftsmanship, rigorous manufacturing, and leading technology, it has won the affection of users.
6
3
Share

How to Start an Audi Car with a Dead Battery?

Push-starting is the most familiar and effective emergency starting method, but it should only be used as a last resort and not frequently employed. This method can cause some damage to the engine and clutch, and it should be especially avoided for automatic transmission vehicles. To avoid being unable to charge a dead battery, Audi A6L owners should keep a set of jumper cables in their car, which can be purchased at most auto parts stores. This method works on the same principle as the first one, except that instead of pushing from behind, the car is pulled from the front. Of course, this method is also much less labor-intensive than the first one.
8
0
Share

Where is the first aid kit in the new Sagitar?

The new Sagitar does not come with a first aid kit. Generally, only high-end models with luxury configurations are equipped with first aid kits. If owners have a need, they can prepare their own first aid kit. The first aid kit is very compact and easy to place, requiring only a small space. It usually contains medical emergency supplies such as gauze. The new Sagitar is a joint venture A+ class sedan brand under FAW-Volkswagen. It features a six-ridge line diving front hood that matches the grille facade, combined with new LED headlights and front grille ambient lighting. The design includes a comet-style surrounding waistline, elastic surface design, a coupe-style C-pillar shape, and 18-inch two-tone wheels.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.